2 layers97.1 × 97.1 mm
ESP32 IMU Module V1.1
shaun-lloyd/dev-ardupilot-obal
ArduPi is an open hardware Raspberry Pi hat to run Ardupilot.
87 parts2CC0-1.0
2 layers40.6 × 33 mm
Qwiic GPS RTK - ublox NEO M8P
shaun-lloyd/dev-ardupilot-obal2ArduPi is an open hardware Raspberry Pi hat to run Ardupilot.
- Size
- 40.6 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 39
- Pads
- 156
- Tracks, vias
- 334, 203
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 30 May 2022
- Updated
- 18 Jul 2022
Overview
Qwiic GPS RTK - ublox NEO M8P is an open-source printed circuit board by shaun-lloyd, from the shaun-lloyd/dev-ardupilot-obal repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 40.6 × 33 mm with 103 parts on 39 nets, routed with 334 tracks and 203 vias.
It is built around the NEO-M8P-2 and PRTR5V0U2F. Its parts include 15 resistors, 6 diodes, 6 connectors, 5 capacitors and 2 ICs. It belongs with the radio and wireless boards of this library.
Main components
2README
doc/ref/schematic/ardupilot/TauLabs-Sparky/sparky2/hw/kicad/README.mdNOTE: THESE HAVE NOT BEEN TESTED. USE WITH CAUTION
These kicad project files are automagically generated from the original Altium files using: https://github.com/thesourcerer8/altium2kicad/
They are provided for people who want to make their own board variants, and thus it is up to the person making a derivative to verify the board for correctness as these have never been tested.
Consistent with Sparky2, these files are license CC-BY-SA-NC 4.0
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Qwiic GPS-RTK - ublox NEO-M8P:0603 | R1, R5, R11, R12, R13 |
| 4 | Qwiic GPS-RTK - ublox NEO-M8P:3V3-04 | U$6, U$7, U$60, U$61 | |
| 4 | Qwiic GPS-RTK - ublox NEO-M8P:GND-04 | U$8, U$9, U$62, U$63 | |
| 4 | 33 | Qwiic GPS-RTK - ublox NEO-M8P:0603 | R2, R3, R4, R6 |
| 4 | FIDUCIALUFIDUCIAL | Qwiic GPS-RTK - ublox NEO-M8P:MICRO-FIDUCIAL | JP21, JP61, JP71, JP81 |
| 4 | STAND-OFF | Qwiic GPS-RTK - ublox NEO-M8P:STAND-OFF | JP31, JP41, JP91, JP101 |
| 3 | Qwiic GPS-RTK - ublox NEO-M8P:RTK1 | U$13, U$28, U$29 | |
| 3 | Qwiic GPS-RTK - ublox NEO-M8P:SMT-JUMPER_2_NC_TRACE_SILK | JP1, JP2, JP3 | |
| 3 | 1.0uF | Qwiic GPS-RTK - ublox NEO-M8P:0603 | C3, C4, C6 |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:PPS5 | U$43, U$44 | |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:INT8 | U$15, U$16 | |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:SDA-[) | U$1, U$4 | |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:#SAFE1 | U$39, U$40 | |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:SCK-(]-04 | U$38, U$41 | |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:FENCE0 | U$14, U$17 | |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:#RST3 | U$35, U$36 | |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:CS#-_] | U$23, U$24 | |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:SCL-[) | U$3, U$5 | |
| 2 | Qwiic GPS-RTK - ublox NEO-M8P:5V | U$19, U$20 | |
| 2 | 2.2k | Qwiic GPS-RTK - ublox NEO-M8P:0603 | R7, R8 |
| 2 | 27 | Qwiic GPS-RTK - ublox NEO-M8P:0603 | R9, R10 |
| 2 | Qwiic Right Angle | Qwiic GPS-RTK - ublox NEO-M8P:1X04_1MM_RA | J2, J4 |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:SMT-JUMPER_2_NO_SILK | JP4 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:TX#MISO1 | U$37 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:RX#MOSI3 | U$31 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:USB-MICROB-PTH-MILL | J6 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:ANT0 | U$55 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:1X07_NO_SILK | J1 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:DSEL0 | U$27 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:PWR-()-03 | U$18 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:NEO#M8P3 | U$53 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:PPS0 | U$52 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:TX#MISO0 | U$34 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:I_SUPER2_C-()-03 | U$10 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:GPS#RTK1 | U$54 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:FENCE2 | U$11 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:RX#MOSI2 | U$26 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:QWIIC-LOGO-MEDIUM | U$30 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:JP20 | U$12 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:1X06_NO_SILK | JP15 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:SMT-JUMPER_3_2-NC_TRACE_SILK | JP5 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:JP32 | U$32 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:JP10 | U$25 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:SFE_LOGO_FLAME_.1 | U$33 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:U#BLOX3 | U$22 | |
| 1 | Qwiic GPS-RTK - ublox NEO-M8P:GPS#RTK0 | U$21 | |
| 1 | 0.1uF | Qwiic GPS-RTK - ublox NEO-M8P:0603 | C5 |
| 1 | 0.5A/40V/420mV | Qwiic GPS-RTK - ublox NEO-M8P:SOD-323 | D2 |
| 1 | 10 | Qwiic GPS-RTK - ublox NEO-M8P:0603 | R14 |
| 1 | 100k | Qwiic GPS-RTK - ublox NEO-M8P:0603 | R15 |
| 1 | 3.3V | Qwiic GPS-RTK - ublox NEO-M8P:SOT23-5 | U2 |
| 1 | 30Ω/1.8A | Qwiic GPS-RTK - ublox NEO-M8P:0603 | FB1 |
| 1 | 47pF | Qwiic GPS-RTK - ublox NEO-M8P:0603 | C1 |
| 1 | 6.8MM_COIN_CELL | Qwiic GPS-RTK - ublox NEO-M8P:BATTCON-6.8MM | B1 |
| 1 | BLUE | Qwiic GPS-RTK - ublox NEO-M8P:LED-0603 | D4 |
| 1 | FRAME-LETTER | Qwiic GPS-RTK - ublox NEO-M8P:CREATIVE_COMMONS | FRAME1 |
| 1 | GREEN | Qwiic GPS-RTK - ublox NEO-M8P:LED-0603 | D3 |
| 1 | NEO-M8P | Qwiic GPS-RTK - ublox NEO-M8P:NEO-M8P | U1 |
| 1 | OSHW-LOGOMINI | Qwiic GPS-RTK - ublox NEO-M8P:OSHW-LOGO-MINI | LOGO1 |
| 1 | PRTR5V0U2F | Qwiic GPS-RTK - ublox NEO-M8P:SOT886 | D5 |
| 1 | PTH | Qwiic GPS-RTK - ublox NEO-M8P:1X04_NO_SILK | J3 |
| 1 | RED | Qwiic GPS-RTK - ublox NEO-M8P:LED-0603 | LED2 |
| 1 | SFE_LOGO_NAME_FLAME.1_INCH | Qwiic GPS-RTK - ublox NEO-M8P:SFE_LOGO_NAME_FLAME_.1 | LOGO2 |
| 1 | U.FL | Qwiic GPS-RTK - ublox NEO-M8P:U.FL | J13 |
| 1 | Yellow | Qwiic GPS-RTK - ublox NEO-M8P:LED-0603 | D1 |
More from shaun-lloyd/dev-ardupilot-obal
2- 4 layers36 × 36 mm
Sparky2
shaun-lloyd/dev-ardupilot-obal
ArduPi is an open hardware Raspberry Pi hat to run Ardupilot.
78 parts2CC0-1.0
Similar boards
- 4 layers100.9 × 71.5 mm
Raccoon
barbinbrad/raccoon
Car Hacking PCB and firmware for a USB to CAN interface, with support for 4 CAN transceivers and an optional NEO-MP8 GNSS module.
56 parts16MIT - 2 layers
- 2 layers60.5 × 40.1 mm
Mlab modules GPS02 GPS02B
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
64 parts1 - 4 layers69.8 × 35.2 mm
- 4 layers162.6 × 78.7 mm
ECP5-Breakout
chenzhuoyu/rainbow-board
ECP5 FPGA breakout board for Colorlight i5 / i9
98 parts3Apache-2.0 - 2 layers40.6 × 36.8 mm
- 4 layers68.2 × 110.1 mm
Version current
oomlout/oomlout_oomp_documentation_bot
a bot that goes around generating rough documentation for kicad projects
171 parts - 4 layers52 × 57.8 mm
ZED F9P
Will946/GNSS
u-blox ZED-F9P RTK GNSS breakout board with dual-band L1/L2 reception and centimeter-level positioning accuracy.
65 partsMIT
Questions
How big is the Qwiic GPS RTK - ublox NEO M8P PCB?
It measures 40.6 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Qwiic GPS RTK - ublox NEO M8P use?
103 parts, built around the NEO-M8P-2 and PRTR5V0U2F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Qwiic GPS RTK - ublox NEO M8P KiCad files?
From the shaun-lloyd/dev-ardupilot-obal repository on GitHub, at the commit this page was made from: the board is doc/ref/schematic/sparkfun-ublox_neo-m8p-2/Hardware/Qwiic GPS-RTK - ublox NEO-M8P.kicad_pcb and its schematic doc/ref/schematic/Adafruit-BMP280-Breakout-PCB/Adafruit BMP280.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Qwiic GPS RTK - ublox NEO M8P design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).