4 layers68.2 × 110.1 mm Version current, the printed circuit board in 3D

Version current

a bot that goes around generating rough documentation for kicad projects

Size: 68.2 × 110.1 mm
Copper layers: 4
Thickness: 1.6 mm
Parts: 171
Nets: 98
Pads: 553
Tracks, vias: 1,072, 342
Pours: 9
Routed: Yes
KiCad: KiCad 7 (file 20221018)
Created: 22 Jul 2023
Updated: 26 Jul 2023

Overview

Version current is an open-source printed circuit board by oomlout, from the oomlout/oomlout_oomp_documentation_bot repository on GitHub. It is a 4-layer board of 68.2 × 110.1 mm with 171 parts on 98 nets, routed with 1,072 tracks and 342 vias.

It is built around the PRTR5V0U2F. Its parts include 29 resistors, 25 capacitors, 15 connectors, 6 diodes and 2 ICs.

Main components

PRTR5V0U2F
SON-6(1x1.5)0.9pF 16V 5V 6.5V 80nA ESD IEC 61000-4-4 Unidirectional SON-6(1x1.5) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)

Project files

Show this board on your page

https://pcbkit.io/boards/oomlout/oomlout_oomp_documentation_bot

The board's own page, for a message or a post.

Source

Repository: oomlout/oomlout_oomp_documentation_bot
Board file: projects/sparkfun/SparkFun_RTK_Express_Plus/oomp_documentation/version_current/working/working.kicad_pcb
Commit: 9327abf
Licence: Not stated

Parts

171

Qty	Value	Footprint	References
14	0.1uF	working:0603	C3, C5, C7, C11, C12, C13, C15, C16, C21, C22, C23, C27, C28, C29
7	10k	working:0603	R6, R8, R18, R23, R29, R31, R33
5	1.0uF	working:0603	C2, C4, C6, C17, C18
5	100k	working:0603	R13, R15, R20, R22, R26
5	33	working:1206_RA	R2, R3, R4, R9, R25
4		working:1X02_NO_SILK	J1, J10, J14, J15
4	10uF	working:0603	C10, C14, C19, C20
4	5.1k	working:0603	R16, R17, R37, R38
4	FIDUCIALUFIDUCIAL	working:FIDUCIAL-MICRO	JP21, JP61, JP71, JP81
3		working:#GND#0	U$38, U$48, U$82
3		working:1X04_NO_SILK	J7, J11, J12
3	3A/10V/280mV	working:SOD-323	D3, D7, D9
2		working:EXPRESS_PLUS0	U$12, U$22
2		working:#3V3#0	U$5, U$47
2		working:#RX1#2	U$45, U$68
2		working:USB1	U$36, U$66
2		working:RTK0	U$7, U$74
2		working:JST-4-SMD-1.25MM-LOCKING	J2, J9
2		working:#TX1#1	U$46, U$65
2		working:QWIIC_4MM	U$30, U$93
2	1k	working:0603	R7, R19
2	27	working:0603	R27, R28
2	4.7uF	working:0603	C8, C9
2	JUMPER-COMBO_2_NC_TRACE	working:COMBO-JUMPER_2_NC_TRACE	MEAS0, MEAS1
2	NC7SZ14-D	working:SIP6	U8, U9
2	PRTR5V0U2F	working:SOT886	D2, D6
2	SFE_LOGO_NAME_FLAME.1_INCH	working:SFE_LOGO_NAME_FLAME_.1	LOGO2, LOGO3
2	USB Female Type C Connector	working:USB-C-16P_4LAYER-PADS	J3, J5
1		working:#ESP_RST#0	U$60
1		working:#3#5#5V#0	U$23
1		working:Z2	U$56
1		working:LIPO0	U$27
1		working:U#BLOX0	U$35
1		working:ACTIVE1	U$13
1		working:1553DBK-ENCLOSURE	U$26
1		working:#SDA#0	U$87
1		working:#FENCE#3	U$32
1		working:#GND#2	U$70
1		working:#TX2#1	U$40
1		working:NMEA1	U$49
1		working:##RST##4	U$28
1		working:#SCL#1	U$86
1		working:#D_SEL#0	U$88
1		working:INT0	U$4
1		working:V130	U$1
1		working:X0	U$24
1		working:PWR_BTN1	U$9
1		working:PWR0	U$41
1		working:SETUP1	U$42
1		working:1X01_NO_SILK	J18
1		working:RADIO0	U$50
1		working:SERIAL10	U$29
1		working:#RX#2	U$14
1		working:CHG2	U$33
1		working:#RX2#2	U$39
1		working:MICROSD0	U$83
1		working:GND3	U$34
1		working:#TX_RDY#0	U$3
1		working:#PPS#0	U$11
1		working:SERIAL20	U$43
1		working:Y1	U$55
1		working:#TX#1	U$72
1		working:#3V3#2	U$85
1		working:ANTENNA2	U$15
1		working:##SAFE##5	U$17
1		working:1X05_NO_SILK	J6
1		working:OVERLAY0	U$8
1		working:#GND#1	U$84
1		working:L1#L20	U$6
1		working:JST-2-SMD	J8
1		working:FPC_6_1MM-LIF	J19
1		working:ESP320	U$67
1		working:#RTK#1	U$10
1		working:ZED0	U$16
1	0	working:0603	R5
1	10	working:0603	R14
1	150k	working:0603	R30
1	2.66Ω	working:0402-TIGHT	FB1
1	250mA/100V	working:SOD-323	D1
1	3.3k	working:0603	R34

The 145 most common of 171 parts.

Similar boards

4 layers69.8 × 35.2 mm
NerdYcontroller
KidsLabDe/GamePadPico
Lamp-PCB for kidslab.
123 parts5
4 layers162.6 × 78.7 mm
ECP5-Breakout
chenzhuoyu/rainbow-board
ECP5 FPGA breakout board for Colorlight i5 / i9
98 parts3Apache-2.0
2 layers40.6 × 33 mm
Qwiic GPS RTK - ublox NEO M8P
shaun-lloyd/dev-ardupilot-obal
ArduPi is an open hardware Raspberry Pi hat to run Ardupilot.
103 parts2CC0-1.0
2 layers40.6 × 36.8 mm
SparkFun GPS NEO M9N SMA
PHS-SMCS/SMCSKart-Mainboard
Documentation for the SMCSKart PCB
94 parts1
4 layers52 × 57.8 mm
ZED F9P
Will946/GNSS
u-blox ZED-F9P RTK GNSS breakout board with dual-band L1/L2 reception and centimeter-level positioning accuracy.
65 partsMIT
4 layers43.2 × 43.2 mm
Qwiic GPS RTK SMA - ublox ZED F9P
Zmotive/HY_550CJ_Control_board
This Project is still under development and not all features have been tested. As I work through the hardware I will continue to update.
143 parts
4 layers25 × 25 mm
SensWear V1R2-Debug
HeyPCB/senswear-kicad
Sens Wear's SensWear smart ring hardware, converted from their Altium design to KiCad 10. Design by Sens Wear (github.com/Sens-Wear/hardware), MIT.
73 partsMIT
4 layers50 × 50 mm
Rosmo ESC
kitspace-test-repos/kicad6-file-collection

116 partsMIT

Questions

How big is the Version current PCB?

It measures 68.2 × 110.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Version current use?

171 parts, built around the PRTR5V0U2F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Version current KiCad files?

From the oomlout/oomlout_oomp_documentation_bot repository on GitHub, at the commit this page was made from: the board is projects/sparkfun/SparkFun_RTK_Express_Plus/oomp_documentation/version_current/working/working.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Version current design in my own project?

Its repository states no licence, so its author keeps all rights: ask oomlout before reusing the design.