

STM32Programmer
- Size
- 41.5 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 27
- Pads
- 82
- Tracks, vias
- 160, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Jan 2025
- Updated
- 18 Jun 2025
Overview
STM32Programmer is an open-source printed circuit board by sharkseed, from the sharkseed/Mini-quadcopter-STM32 repository on GitHub. It is a 2-layer board of 41.5 × 30 mm with 31 parts on 27 nets, routed with 160 tracks and 0 vias.
It is built around the CH340G, AMS1117-3.3 and BC817. Its parts include 8 resistors, 6 capacitors, 3 diodes, 2 ICs and 1 transistor. It belongs with the STM32 boards of this library.
Main components
3CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | , , , , , , | ||
| 5 | 1k | Resistor_SMD:R_1206_3216Metric | R4, R5, R8, R9, R10 |
| 2 | 0 | Resistor_SMD:R_1206_3216Metric | R5, R100 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C5, C7 |
| 2 | 12p | Capacitor_SMD:C_1206_3216Metric | C4, C6 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 12MHz | Crystal:Crystal_SMD_SeikoEpson_MC405-2Pin_9.6x4.1mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BLUE | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | GREEN | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | RED | LED_SMD:LED_1206_3216Metric | D4 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | J1 |
The 29 most common of 31 parts.
More from sharkseed/Mini-quadcopter-STM32
1- 2 layers70.2 × 70.2 mm

Similar boards
- 2 layers89.6 × 79 mm

TDR 5351 core
MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
199 parts33GPL-3.0 - 2 layers183.2 × 65.1 mm

- 2 layers74.5 × 61.2 mm

11.ESP8266 WiFi Dev Board
Abhi90808/ESP8266-WiFi-Dev-Board
Custom ESP8266-based WiFi development board with onboard USB-to-serial, 3.3V regulator, and breadboard-friendly pinout for IoT prototyping
64 parts - 2 layers177.8 × 175.3 mm

- 2 layers55.9 × 98.9 mm

Panel1
RoboticsBrno/semafor
:vertical_traffic_light: Traffic light gadget for outdoor games designed for Helceletka.cz.
252 partsMIT - 2 layers55 × 100 mm

- 4 layers29.5 × 64.5 mm

Iot esp eth ind
wayri/SPIKE
PCB-focused multiphysics simulation, from board to complete assembly: PI, SI, circuits, thermal, EM/RF and mechanical workflows, with MCAD collaboration and a roadmap toward large-scale coupled assemblies.
150 parts17 - 2 layers87 × 47 mm

Questions
How big is the STM32Programmer PCB?
It measures 41.5 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32Programmer use?
31 parts, built around the CH340G, AMS1117-3.3 and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32Programmer KiCad files?
From the sharkseed/Mini-quadcopter-STM32 repository on GitHub, at the commit this page was made from: the board is STM32Programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32Programmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask sharkseed before reusing the design.