
4dapter
timville85/4dapter
This project combines the NES, SNES, N64 and Genesis DaemonBite Retro Controllers projects together with a custom PCB to support 4 different controllers with a single socketed Arduino Pro Micro.

SmartLogistics is an open-source printed circuit board by shakeel-Ahamed-A, from the shakeel-Ahamed-A/Logistics repository on GitHub. It is a 2-layer board of 110 × 110 mm with 63 parts on 54 nets, routed with 377 tracks and 12 vias.
It is built around the MCP1700-3302E/TO and AO3401A. Its parts include 16 connectors, 12 capacitors, 12 resistors, 4 diodes and 2 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n 10V | Carrier:C_Disc_D5.0mm_W2.5mm_P5.00mm | C5, C6, C7, C8, C9, C10, C12 |
| 4 | 10k | Carrier:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7 |
| 4 | M3 3.2mm | Carrier:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 330 | Carrier:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9, R10 |
| 3 | 4k7 DNP | Carrier:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 2 | 100u 10V | Carrier:CP_Radial_D6.3mm_P2.50mm | C1, C11 |
| 2 | 1u X7R 10V | Carrier:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3 |
| 1 | 100k | Carrier:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 10u 10V | Carrier:CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | 1N4007 | Carrier:D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 1 | 3V3_AUX | Carrier:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | 3V3_BP | Carrier:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4 |
| 1 | 5V_PROT | Carrier:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | 680 | Carrier:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | AO3401A | Carrier:SOT-23 | Q1 |
| 1 | BLUE | Carrier:LED_D3.0mm | D2 |
| 1 | BLUE PILL H1 - NOMINAL | Carrier:PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | BLUE PILL H2 - NOMINAL | Carrier:PinSocket_1x20_P2.54mm_Vertical | J3 |
| 1 | BUTTON 1 TO GND | Carrier:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | BUTTON 2 TO GND | Carrier:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | BUZZER 5V - OPEN | Carrier:PinHeader_1x02_P2.54mm_Vertical | JP8 |
| 1 | BUZZER HARNESS | Carrier:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | DHT POWER - OPEN | Carrier:PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | DHT11 HARNESS - VERIFY | Carrier:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | GND | Carrier:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | GPS 5V CANDIDATE - OPEN | Carrier:PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 1 | GPS HARNESS - VERIFY | Carrier:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | GREEN | Carrier:LED_D3.0mm | D1 |
| 1 | MASTER POWER - OPEN | Carrier:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | MCP1700-3302E/TO | Carrier:TO-92_Inline_Wide | U1 |
| 1 | MPU HARNESS - VERIFY | Carrier:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | MPU POWER - OPEN | Carrier:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | P2N2222AG | Carrier:TO-92_Inline_Wide | Q2 |
| 1 | RED | Carrier:LED_D3.0mm | D3 |
| 1 | REED TO GND | Carrier:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | REGULATED 5V INPUT | Carrier:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | RTC HARNESS - VERIFY | Carrier:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | RTC POWER - OPEN | Carrier:PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | SD 5V CANDIDATE - OPEN | Carrier:PinHeader_1x02_P2.54mm_Vertical | JP6 |
| 1 | SD HARNESS - VERIFY | Carrier:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | STLINK SIGNALS ONLY | Carrier:PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | SW420 HARNESS - VERIFY | Carrier:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | SW420 POWER - OPEN | Carrier:PinHeader_1x02_P2.54mm_Vertical | JP7 |
| 1 | TO BLUE PILL SWD CABLE | Carrier:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | VTREF SENSE ONLY | Carrier:PinHeader_1x02_P2.54mm_Vertical | J16 |

timville85/4dapter
This project combines the NES, SNES, N64 and Genesis DaemonBite Retro Controllers projects together with a custom PCB to support 4 different controllers with a single socketed Arduino Pro Micro.




Jeffrey-McCormick/Project-Heartbeat
End-to-end embedded system project to accurately measure the heart rate of a person


MengqiS21/TECHIN514_FinalProject
A wearable sensing tag for pets and a tabletop display that visualizes daily activity and proximity-based companionship.

MengqiS21/TECHIN515_final_project-individual-
Vehicle engine faults such as air leaks, ignition misfires, and abnormal idle behavior often produce characteristic acoustic signatures that trained mechanics can identify by ear.
It measures 110 × 110 mm and has 2 copper layers, 1.6 mm thick.
63 parts, built around the MCP1700-3302E/TO and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shakeel-Ahamed-A/Logistics repository on GitHub, at the commit this page was made from: the board is PCB_Fabrication/SmartLogistics.kicad_pcb and its schematic PCB_Fabrication/SmartLogistics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shakeel-Ahamed-A before reusing the design.