4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers72 × 48 mm
A basic pcb to filter high frequency noise and regulate voltage for sensitive instrumentation
- Size
- 72 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 7
- Pads
- 39
- Tracks, vias
- 44, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Aug 2024
- Updated
- 15 Oct 2024
Overview
Filter is an open-source printed circuit board by seth-sievers, from the seth-sievers/power-filter repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 72 × 48 mm with 20 parts on 7 nets, routed with 44 tracks and 0 vias.
It is built around the 1N4148W. Its parts include 6 capacitors, 3 resistors, 3 diodes, 2 connectors and 1 IC.
Main components
1README
README.mdpower-filter
A basic pcb to filter high frequency noise and regulate voltage for sensitive instrumentation
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1mF (EL) | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C1, C2, C3 |
| 2 | 1N4148W | Diode_SMD:D_SOD-323 | D1, D2 |
| 2 | 282834-2 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J1, J2 |
| 1 | 10R | Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P30.48mm_Horizontal | R1 |
| 1 | 10n (C0G) | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10u (EL) | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 2.2k (TkF) | Resistor_SMD:R_1210_3225Metric | R3 |
| 1 | 22u (EL) | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C6 |
| 1 | 240R (TnF) | Capacitor_SMD:C_0603_1608Metric | R2 |
| 1 | 4.7k | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | LM317_TO-220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U1 |
| 1 | RED | LED_THT:LED_D5.0mm | D3 |
The 16 most common of 20 parts.
Questions
How big is the Filter PCB?
It measures 72 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Filter use?
20 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Filter KiCad files?
From the seth-sievers/power-filter repository on GitHub, at the commit this page was made from: the board is kicad/filter.kicad_pcb and its schematic kicad/filter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Filter design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
