
E ink watch
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

My first hardware project: A 2-layer SpO2 (Pulse Oximeter) PCB designed from scratch using KiCad. Includes schematics, layout, and custom libraries.
Beginning project is an open-source printed circuit board by serkank4, from the serkank4/spo2-pcb-design repository on GitHub. It is a 2-layer board of 77 × 51 mm with 15 parts on 31 nets, routed with 62 tracks and 4 vias.
It is built around the MAX30102. Its parts include 4 resistors, 3 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This repository contains my very first PCB design using KiCad EDA. It was created as a learning project to understand the complete hardware design workflow, from schematic capture to generating production-ready Gerber files.
spo2_stuff) for components not available in the standard KiCad library.| 3D Render | Schematic | PCB Layout |
|---|---|---|
![]() | ![]() | ![]() |
*.kicad_sch — Schematic source file.*.kicad_pcb — PCB layout design file.spo2_stuff*/ — Custom symbol and footprint libraries designed specifically for this project.gerbers/ — Fabrication output files ready for actual manufacturing.If you have any feedback or tips for a beginner hardware designer, feel free to open an issue or reach out!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 3 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | DOWN, MENU, UP |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | LED | LED_THT:LED_D5.0mm | ALARM |
| 1 | LOGO | LOGO | G*** |
| 1 | MAX30102 | spo2_stuff:MAX30102_Module | U1 |
| 1 | SSD1306 | spo2_stuff:SSD1306 | U2 |

sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

theheraldproject/herald-hardware
Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.

abhinav937/RP2040_SOS_band
PCB design files for RP2040 based SmartWatch. It features an accelerometer, a GPS module and a cellular module.

Epivaral/CursoIoT
Material complementario del curso: INTRODUCCIÓN A IOT, ALMACENAMIENTO EN LA NUBE Y ANÁLISIS DE DATA

Ghost3379/NX-ISD
A more sophisticated version of the Artemis Watch by Circuitmess.


Soham3126/DIY-SPO2-KiCAD-Project
A low-cost, non-invasive Pulse Oximeter (SpO2) and Heart Rate monitor based on the MAX30102 sensor and Arduino. This project features real-time PPG signal processing, I2C communication, and a custom PCB design for…

Taller-de-sistemas-embebidos-tps/tdse-tf_2-01
Trabajo Final - Taller de Sistemas Embebidos - FIUBA
It measures 77 × 51 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the MAX30102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the serkank4/spo2-pcb-design repository on GitHub, at the commit this page was made from: the board is beginning-project.kicad_pcb and its schematic beginning-project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask serkank4 before reusing the design.