

MiniBee
hardware design files for the Sense/Stage MiniBees
- Size
- 26.5 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 50
- Pads
- 157
- Tracks, vias
- 499, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Aug 2012
- Updated
- 11 May 2019
Overview
MiniBee is an open-source printed circuit board by sensestage, from the sensestage/minibee_hardware repository on GitHub. It is a 2-layer board of 26.5 × 34 mm with 39 parts on 50 nets, routed with 499 tracks and 38 vias.
It is built around the ADXL345-EP. Its parts include 7 resistors, 5 capacitors, 4 diodes, 2 ICs and 1 switch.
Main components
1README
READMEThis repository contains the Eagle design files for the Sense/Stage MiniBee (folder minibee) and a programmer (folder programmer) for the Sense/Stage MiniBee.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 470 ohm | R0402 | R1, R2, R3, R7 |
| 4 | MYSHIT_PINHD-1X1 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | JP8, JP9, JP10, JP11 |
| 4 | ~ | 1X01 | JP3, JP4, JP5, JP7 |
| 2 | 0.1uF | C0402 | C3, C4 |
| 2 | 10uF | C0805 | C1, C2 |
| 2 | 1k ohm | R0402 | R4, R5 |
| 2 | ~ | 1X02 | JP2, JP6 |
| 1 | @HOLE0 | ||
| 1 | + | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | JP12 |
| 1 | - | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | JP13 |
| 1 | 0.1uF | C0402K | C5 |
| 1 | 10k ohm | R0402 | R6 |
| 1 | 12MHz | RESONATOR-SMD | RESONATOR12 |
| 1 | ADXL345 | LGA14 | U1 |
| 1 | COINCELL | KEYSTONE_BATTERY_HOLDER | COINCELL12 |
| 1 | JST_CONNECTOR | S2B-PH | JST_CONNECTOR12 |
| 1 | MEGA8-AI | TQFP32-08 | IC1 |
| 1 | PTCSMD | PTC-1206 | F1 |
| 1 | Switch_SPDT_x2 | alps:alps_switch | SW1 |
| 1 | V_REG_LDOSMD | SOT23-5 | VREG12 |
| 1 | XBEE | XBEE | XB1 |
| 1 | blue | CHIP-LED0603 | LED4 |
| 1 | green | CHIP-LED0603 | LED1 |
| 1 | red | CHIP-LED0603 | LED2 |
| 1 | yellow | CHIP-LED0603 | LED3 |
| 1 | ~ | 2X10 | JP1 |
Similar boards
- 4 layers42 × 42 mm

- 2 layers97 × 77.5 mm

ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 2 layers65 × 56 mm

- 2 layers61.3 × 89.6 mm

QuakeGuard PCB
GiZano/QuakeGuard
Distributed Earthquake Early Warning (EEW) system built on low-cost ESP32-C3 IoT sensors with Zero-Trust security, multi-node epicenter triangulation, and on-premise AI emergency reports.
17 parts24AGPL-3.0 - 6 layers60 × 60 mm

High Temp Load Cell Toolhead Board
garethky/ADS1220-Klipper-Board
A board for connecting up to 4 Load cells to an ADS1220
125 parts23GPL-3.0 - 2 layers184.2 × 71.2 mm

- 2 layers112 × 62 mm

- 2 layers89.5 × 48 mm

Avionics
cuspaceflight/avionics14
Designed to be compiled with the GNU ARM Toolchain - https://launchpad.net/gcc-arm-embedded
115 parts4
Questions
How big is the MiniBee PCB?
It measures 26.5 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MiniBee use?
39 parts, built around the ADXL345-EP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MiniBee KiCad files?
From the sensestage/minibee_hardware repository on GitHub, at the commit this page was made from: the board is minibee/revF_kicad/MiniBee.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MiniBee design in my own project?
Its repository states no licence, so its author keeps all rights: ask sensestage before reusing the design.