2 layers78.4 × 90.4 mm
IphoneFM panel
louisflakes/IphoneFM
KiCad project for IphoneFM Rev A. Built step by step from ../../design/rev-a/kicad-build-procedure.md; checked with ../../tools/kicadcheck.py.
134 parts
2 layers
Test pcb-2024
senrobo/test-pcb-2024- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 41
- Pads
- 123
- Tracks, vias
- 160, 37
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Oct 2024
- Updated
- 21 Oct 2024
Overview
Test pcb-2024 is an open-source printed circuit board by senrobo, from the senrobo/test-pcb-2024 repository on GitHub. It is a 2-layer board with 35 parts on 41 nets, routed with 160 tracks and 37 vias.
It is built around the ICM-42688-P, RCLAMP0521PATCT and IRLB3036PBF. Its parts include 10 capacitors, 7 diodes, 3 ICs, 3 connectors and 2 resistors. It belongs with the STM32 boards of this library.
Main components
3
ICM-42688-P
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 7.5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps Motion Event Detection, Synchronization, Timestamp Support LGA-14(2.5x3) Accelerometers ROHSTDK InvenSenseAccelerometers
RCLAMP0521PATCT
0402-55℃~+125℃@(Tj) 0.5pF 1 100W 25V 25nA 4A 5V 6V Bidirectional ESD IEC 61000-4-2 0402 ESD and Surge Protection (TVS/ESD) ROHSSEMTECHESD And Surge Protection (TVS/ESD)
IRLB3036PBF
TO-220AB-55℃~+175℃ 1 N-channel 11.21nF 140nC 2.4mΩ@10V 2.5V 270A 380W 500pF 60V TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdtest-pcb-2024
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | RCLAMP0521PATCT | Library:RCLAMP0521PATCT | D1, D2, D3, D4, D5, D6 |
| 3 | 0u1 | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5, C8 |
| 2 | 100 | Library:res0603 | BSR2, BSR3 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C10 |
| 2 | 2u2 | Library:cap0603 | C1, C2 |
| 2 | 2u2 | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C6 |
| 1 | 0.1u | Library:res0603 | BSC1 |
| 1 | 100R | Library:fb0603 | FB1 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7 |
| 1 | 16MHz | Library:830108288709 | U2 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1N5401 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | BSD1 |
| 1 | 1n5 | Library:cap0603 | BSC2 |
| 1 | 20R | Library:res0603 | BSR1 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | ICM-42688-P | Library:IIM42352 | IC1 |
| 1 | IRLB3036PbF | Library:TO-220-3_Vertical | BSQ1 |
| 1 | NCP81074AMNTBG | Library:SON50P200X200X100-9N | BSU1 |
| 1 | R | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | RED | Library:led0603 | D7 |
| 1 | STM32G071GBUx | Package_DFN_QFN:QFN-28_4x4mm_P0.5mm | U1 |
| 1 | XT30 | Library:xt30-f | BSJ1 |
Questions
What parts does the Test pcb-2024 use?
35 parts, built around the ICM-42688-P, RCLAMP0521PATCT and IRLB3036PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Test pcb-2024 KiCad files?
From the senrobo/test-pcb-2024 repository on GitHub, at the commit this page was made from: the board is main/main.kicad_pcb and its schematic main/boost.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Test pcb-2024 design in my own project?
Its repository states no licence, so its author keeps all rights: ask senrobo before reusing the design.
Similar boards
- 4 layers39 × 39 mm
OneInchEye
will127534/OneInchEye
A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi
94 parts355MIT - 6 layers39.5 × 39.5 mm
- 8 layers38.5 × 38.5 mm
Flight Controller
rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!
133 parts57MIT - 4 layers66.4 × 66.4 mm
Rera
fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.
140 parts34GPL-3.0 - 4 layers39 × 39 mm
GlobalEye
will127534/GlobalEye
A simple camera board using GMAX3412 1" 4K@30fps global shutter sensor
148 parts31MIT - 4 layers33 × 65.5 mm
OM FlexGrid Rigid PCB
Open-Muscle/OpenMuscle-FlexGrid
60-sensor wearable with flexible PCB and pressure matrix
65 parts19CERN-OHL-S-2.0 - 4 layers36 × 36 mm
