
Pink0
seismicindustries/spink0
eurorack clk / rst generator for ableton LINK - based on pink-0

eurorack clk / rst generator for ableton LINK - based on pink-0
Pink0 mergeMK1 is an open-source printed circuit board by seismicindustries, from the seismicindustries/spink0 repository on GitHub. It is a 2-layer board of 94.1 × 128.7 mm with 96 parts on 67 nets, routed with 1,253 tracks and 165 vias.
It is built around the MCP6004-E/P and MP1469GJ-Z. Its parts include 34 resistors, 12 connectors, 6 capacitors, 4 transistors and 2 ICs.

This repository contains the source code and the schematics for an Ableton Link to clock/reset converter.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | raffilibkicad:R_0805 | R4, R7, R8, R9, R10, R11, R12, R13, R14, R15, R17, R18 |
| 12 | R | raffilibkicad:R_0805 | R1, R2, R3, R4, R13, R14, R15, R16, R17, R18, R19, R20 |
| 6 | GS3 | raffilibkicad:solderbridge | J2, J3, J5, J6, J7, J8 |
| 5 | 10k | raffilibkicad:R_0805 | R5, R6, R21, R23, R24 |
| 4 | 7SEGMENTS | raffilibkicad:ACSA02_KCSA02_7segment | AFF1, AFF2, AFF3, AFF4 |
| 4 | BC849 | raffilibkicad:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | CONN_02X05 | raffilibkicad:PINHEAD_10_pin_jtag_connector | P2, P3, P4, P5 |
| 4 | LED | LEDs:LED_0805 | LENGTH1, PPQN1, RUN1, TEMPO1 |
| 3 | JACK_QINGPU | raffilibkicad:jack_qingpu | CLK_OUT1, MIDI_OUT1, RST_OUT1 |
| 2 | 33n | raffilibkicad:C_0805 | C4, C5 |
| 2 | LED | raffilibkicad:LED_D3.0mm | D1, D2 |
| 1 | 100k | raffilibkicad:R_0805 | R16 |
| 1 | 100n | raffilibkicad:C_0805 | C7 |
| 1 | 1u | raffilibkicad:C_0805 | C3 |
| 1 | 220 | raffilibkicad:R_0805 | R22 |
| 1 | 22u | raffilibkicad:CP_Elec_7.3x4.3 | C6 |
| 1 | 22u | raffilibkicad:CP_Elec_5x5.3 | C1 |
| 1 | 40k2 | raffilibkicad:R_0805 | R2 |
| 1 | 6.8uH | raffilibkicad:Inductor_SRN4018TA_bourns | L3 |
| 1 | 75k | raffilibkicad:R_0805 | R1 |
| 1 | 7k68 | raffilibkicad:R_0805 | R3 |
| 1 | CONN_02X05 | raffilibkicad:Pin_Header_Angled_2x05_Pitch2.54mm_with_space_for_con | P1 |
| 1 | G*** | raffilibkicad:seismic_industries_logo_small | svg2mod |
| 1 | INDUCTOR | raffilibkicad:Inductor_PSU_NLCV32T | L1 |
| 1 | MCP6004 | raffilibkicad:TSSOP-14_4.4x5mm_Pitch0.65mm | U2 |
| 1 | MP1469 | raffilibkicad:SOT-23-6 | U1 |
| 1 | PI_ZERO | raffilibkicad:PI_ZERO | J1 |
| 1 | Rotary_Encoder_Switch | raffilibkicad:ENCODER_PEC11_SMD | SW2 |
| 1 | SW_PUSH_SMALL_H | raffilibkicad:APEM_tactile_SMD_switch_6mm | SW1 |
The 76 most common of 96 parts.


seismicindustries/u_O_C_flat
the Ornament & Crime from mxmxmx - but small n flat so it fits my system

SwampFlux/video-microwrave
eurorack module that uses a raspberry pi zero as a video synth




bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed

Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
It measures 94.1 × 128.7 mm and has 2 copper layers, 1.6 mm thick.
96 parts, built around the MCP6004-E/P and MP1469GJ-Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the seismicindustries/spink0 repository on GitHub, at the commit this page was made from: the board is hardware/spink0_adaption/060_spink0_MB/merge/pink0_mergeMK1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask seismicindustries before reusing the design.