
OLD sensor board
SEDS-PSU/avionics
Board files and etc for avionics and teststand electronics

Board files and etc for avionics and teststand electronics
Sensor board is an open-source printed circuit board by SEDS-PSU, from the SEDS-PSU/avionics repository on GitHub. It is a 4-layer board of 176.6 × 134.6 mm with 193 parts on 231 nets, routed with 1,772 tracks and 584 vias.
It is built around the STM32F105VBH6, MAX44252ASD+T and MAX33014EATB+, with the LMC6036IM and MM3Z3V6C among its other parts. Its parts include 100 resistors, 29 capacitors, 26 connectors, 15 ICs and 4 diodes. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Board files and etc for avionics and teststand electronics
| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 100 | Resistor_SMD:R_0603_1608Metric | R2, R10, R22, R23, R24, R25, R31, R100, R101, R102, R103, R104, R105, R106, R107, R108 +23 |
| 14 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29 |
| 12 | 50k | Resistor_SMD:R_0603_1608Metric | R81, R82, R83, R84, R85, R86, R111, R112, R113, R114, R115, R116 |
| 10 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C8, C9, C10, C11, C12, C13, C14, C15 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R26, R43, R45, R46, R59, R60 |
| 7 | 2.49M | Resistor_SMD:R_0603_1608Metric | R16, R17, R28, R33, R34, R49, R50 |
| 7 | 2M | Resistor_SMD:R_0603_1608Metric | R20, R21, R30, R37, R38, R53, R54 |
| 7 | 487k | Resistor_SMD:R_0603_1608Metric | R18, R19, R29, R35, R36, R51, R52 |
| 7 | MCP96RL01T | MCP96RL01T:MCP96RL01T_QFN | U4, U5, U6, U7, U8, U9, U10 |
| 5 | TestPoint | CustomFootprints:3mm hole | TP10, TP11, TP12, TP13, TP14 |
| 3 | D | Diode_SMD:D_1206_3216Metric | D1, D2, D3 |
| 3 | LMC6036 | LMC6036:SOP65P640X120-14N | U13, U14, U15 |
| 3 | MM3Z3V6C | 3.3V Zener:MM3Z3V6C | CR1, CR2, CR3 |
| 2 | 1.2k | Resistor_SMD:R_0603_1608Metric | R79, R109 |
| 2 | 14.3 | Resistor_SMD:R_0603_1608Metric | R80, R110 |
| 2 | 140 | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C5 |
| 2 | 200 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | CAN_Bus | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J24, J25 |
| 2 | MAX44252ASD | MAX44252ASD-:MAX44252ASD&plus_ | U12, U16 |
| 1 | 0k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1.8k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 13k | Resistor_SMD:R_0603_1608Metric | R48 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R47 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R62 |
| 1 | 261 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 3.2k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 36 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.3k | Resistor_SMD:R_0603_1608Metric | R61 |
| 1 | 43k | Resistor_SMD:R_0603_1608Metric | R44 |
| 1 | 7.5k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 8.2k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | ADC 13 | TestPoint:TestPoint_Pad_D2.0mm | TP15 |
| 1 | ADC 14 | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | CAN_H | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | CAN_L | TestPoint:TestPoint_Pad_D2.0mm | TP7 |
| 1 | Flow_1 | Custom_Molex_SL_2.54:SL_2.54_H_4pin | J18 |
| 1 | Flow_2 | Custom_Molex_SL_2.54:SL_2.54_H_4pin | J19 |
| 1 | I2C_SCL | TestPoint:TestPoint_Pad_D2.0mm | TP8 |
| 1 | I2C_SDA | TestPoint:TestPoint_Pad_D2.0mm | TP9 |
| 1 | LD3985M33R_SOT23 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | LED_RGBA | CustomFootprints:RGB LED | D4 |
| 1 | Load_C_1 | Custom_Molex_SL_2.54:SL_2.54_H_4pin | J11 |
| 1 | Load_C_2 | Custom_Molex_SL_2.54:SL_2.54_H_4pin | J12 |
| 1 | MAX33014EATB+ | MAX33014E:MAX33014EATB&plus_ | U3 |
| 1 | Pressure_1 | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J13 |
| 1 | Pressure_2 | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J14 |
| 1 | Pressure_3 | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J15 |
| 1 | Pressure_4 | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J16 |
| 1 | Pressure_5 | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J7 |
| 1 | Pressure_6 | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J8 |
| 1 | Pressure_7 | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J9 |
| 1 | Pressure_8 | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J10 |
| 1 | Pressure_9 | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J17 |
| 1 | STM32F105VBH6 | STM32F105VB:STM32F105VBH6 | U2 |
| 1 | SWD Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | SW_Push_Dual | Custom_button_CS1102:Button CS1102 | SW1 |
| 1 | Supply_12V | CustomFootprints:PowerPoleThroughHole | J6 |
| 1 | Supply_24V | CustomFootprints:PowerPoleThroughHole | J5 |
| 1 | Suppply_5V | Custom_Molex_SL_2.54:SL_2.54_H_2pin | J4 |
| 1 | TestPoint | CustomFootprints:seds-logo-back-2 | TP3 |
| 1 | TestPoint | CustomFootprints:seds-logo-2 | TP2 |
| 1 | Therm_1 | K_type_thermo_conn_F:K_type_thermo_conn_F | J26 |
| 1 | Therm_2 | K_type_thermo_conn_F:K_type_thermo_conn_F | J29 |
| 1 | Therm_3 | K_type_thermo_conn_F:K_type_thermo_conn_F | J31 |
| 1 | Therm_4 | K_type_thermo_conn_F:K_type_thermo_conn_F | J27 |
| 1 | Therm_5 | K_type_thermo_conn_F:K_type_thermo_conn_F | J30 |
| 1 | Therm_6 | K_type_thermo_conn_F:K_type_thermo_conn_F | J32 |
| 1 | Therm_7 | K_type_thermo_conn_F:K_type_thermo_conn_F | J28 |

SEDS-PSU/avionics
Board files and etc for avionics and teststand electronics





WhirlingBits/ESP32-S3-Platform
ESP32-S3 Development Board with SD-Card and versatile power management 5V and up to 12V

AllenNeuralDynamics/harp.device.lickety-split
0360: an ephys-compliant capacitive lick detector

themarcolab/Stardrive-Shield
With STARDRIVE SHIELD you can implement from 6 step to FOC motor control algorithms.

gabrielyoung92/gabs_microSMT_PickAndPlace
Independent reorganisation of MicroSMT feeder and PNPv3 files, previews and documentation, with upstream attribution and ChatGPT assistance.

badge-gallery/bornhack-2026-hardware
Source-preserving mirror of https://codeberg.org/Ranzbak/bornhack2026-hardware

It measures 176.6 × 134.6 mm and has 4 copper layers, 4.69 mm thick.
193 parts, built around the STM32F105VBH6, MAX44252ASD+T, MAX33014EATB+ and LMC6036IM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SEDS-PSU/avionics repository on GitHub, at the commit this page was made from: the board is electronics/sensor-board/sensor-board.kicad_pcb and its schematic electronics/datasheets/sensor-board/MCP96RL01T_array_thermo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SEDS-PSU before reusing the design.