

SedNav Windsensor SMD
Opensource WindSensor
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 23
- Pads
- 64
- Tracks, vias
- 60, 4
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Sep 2025
- Updated
- 9 Feb 2026
Overview
SedNav Windsensor SMD is an open-source printed circuit board by SedNavOrg, from the SedNavOrg/SedNav_Windsensor repository on GitHub. It is a 2-layer board with 13 parts on 23 nets, routed with 60 tracks and 4 vias.
It is built around the AS5600-ASOT, DS18B20Z and SS411P, with the SS16 among its other parts. Its parts include 5 ICs, 3 resistors, 1 capacitor, 1 diode and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4AS5600-ASOT
SOIC-8-40℃~+125℃ 0°~360° 1.75mm 3.3V、5V 3.9mm 4.9mm 6.5mA I2C Magnetic rotary position sensor No SOIC-8 Position Sensors ROHSAdvanced Monolithic SystemsPosition SensorsDS18B20Z
SOIC-8-55℃~+125℃ 12bit 2.5V~5.5V 750ms Single-bus ±0.4℃ SOIC-8 Temperature Sensors ROHSUMWTemperature SensorsSS411P
TO-92-14mT -40℃~+150℃ 14mT 2.7V~7V TO-92 Hall Switches ROHSHoneywellHall SwitchesSS16
SMA(DO-214AC)-55℃~+150℃ 100uA@60V 1A 60V 700mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSFUXINSEMISchottky Diodes
README
README.mdSedNav_Windsensor
An open-source wind sensor design, taking inspiration from the project Windsensor Yachta by Norbert Walter.
It uses the same firmware, modified to work with this design.
The aims of this derivation are :
-
To simplify the building process, by making the PCB easier to solder by hand
-
To simplify the flashing, by using the ESP32C3 or C6 with a built-in USB interface (no more need for a serial to USB converter)
-
To reduce the size of the wind sensor, by shrinking the pcb and reworking the design, in order to reduce the wind resistance, making it more resilient to winds.
-
To test and validate the design in an actual wind tunnel.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 2 | MountingHole_2.2mm_M2_Pad_TopBottom | MountingHole:MountingHole_2.2mm_M2_Pad_TopBottom | M2_1, M2_2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | AS5600-ASOT | AS5600-ASOT:SOIC127P600X175-8N | IC1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_ZH_B2B-ZR_1x02_P1.50mm_Vertical | J1 |
| 1 | DS18B20Z | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | SS16 | Diode_SMD:D_SMA | D2 |
| 1 | SS411P | Custom:SS411P | U3 |
| 1 | StpDwnE3.3-0.5 | Custom:CONV_R-78K3.3-0.5 | U2 |
| 1 | XIAO-ESP32-C6 | Seeed Studio XIAO Series Library:XIAO-ESP32C6-SMD | U1 |
More from SedNavOrg/SedNav_Windsensor
1- 2 layers

Similar boards
- 2 layers15.2 × 12.7 mm

Location
fo-am/patternmatrix2
A tangible programming language for the Raspberry Pi, built for the Penelope project
8 parts5 - 2 layers100 × 100 mm

Heatplate v1.1
DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate
57 parts179MIT - 2 layers85 × 85 mm

- 2 layers240 × 100 mm

- 2 layers

Rtc pcb
arpandebnath56/RTC-PCB-Design
KiCad-based RTC Module PCB design featuring circuit schematics, PCB layout, 3D visualization, and custom footprint integration.
10 parts - 2 layers99.9 × 79.3 mm

Led controller
azaslavskis/WLED-Controller
Simple project that takes care of LED strips and connect them using esp32 to home assistant interface
65 partsMIT - 2 layers80 × 75 mm

Planta control
cesar191/diseno_PCB
diseño de una pcb de control el cual puede tener diferentes estructuras
55 parts - 2 layers73 × 77 mm

TwomesSensor
energietransitie/twomes-temp-monitor-hardware
Open hardware design files for the Twomes Temperature Monitor hardware
50 parts
Questions
What parts does the SedNav Windsensor SMD use?
13 parts, built around the AS5600-ASOT, DS18B20Z, SS411P and SS16. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SedNav Windsensor SMD KiCad files?
From the SedNavOrg/SedNav_Windsensor repository on GitHub, at the commit this page was made from: the board is hardware/PCB/SMD/SedNav_Windsensor_SMD.kicad_pcb and its schematic hardware/PCB/SMD/SedNav_Windsensor_SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SedNav Windsensor SMD design in my own project?
Its repository states no licence, so its author keeps all rights: ask SedNavOrg before reusing the design.