

Walkure motherboard
- Size
- 240 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 66
- Pads
- 283
- Tracks, vias
- 321, 181
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Aug 2024
- Updated
- 8 Apr 2025
Overview
Walkure motherboard is an open-source printed circuit board by About-Time-Technologies, from the About-Time-Technologies/roh-breakouts repository on GitHub. It is a 2-layer board of 240 × 100 mm with 69 parts on 66 nets, routed with 321 tracks and 181 vias.
It is built around the DS18B20Z and TXB0102DCU. Its parts include 22 connectors, 10 ICs, 3 diodes and 1 fuse. It belongs with the computers and single-board computers boards of this library.
Main components
2DS18B20Z
SOIC-8-55℃~+125℃ 12bit 2.5V~5.5V 750ms Single-bus ±0.4℃ SOIC-8 Temperature Sensors ROHSUMWTemperature SensorsTXB0102DCU
VSSOP-8-0.5mm-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 2 Auto Direction Detection Bidirectional CMOS CMOS Tri-State VSSOP-8-0.5mm Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
README
README.mdroh-breakouts
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP14, TP15, TP16, TP17, TP18, TP19, TP24, TP25, TP26, TP27 +1 |
| 10 | Conn_01x02 | MHCI:2060-452-998-404 Wago | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10 |
| 8 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12, J13, J14, J15, J16, J17, J18, J19 |
| 8 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP6, JP7, JP8, JP9 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4, H5, H6 |
| 6 | ~ | MHCI:MHCI-A6211 | U1, U3, U4, U5, U6, U7 |
| 4 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11, J20, J21, J22 |
| 3 | D_Schottky | Diode_THT:D_DO-41_SOD81_P5.08mm_Vertical_AnodeUp | D1, D2, D3 |
| 1 | |||
| 1 | DS18B20Z | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | Fuse | MHCI:Keystone 4628 | F1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | TXB0102DCU | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U13 |
| 1 | ~ | MHCI:MHCI-DMX | U2 |
| 1 | ~ | MHCI:ESP-32-S3-Zero - PTH | U8 |
More from About-Time-Technologies/roh-breakouts
7- 2 layers60 × 25 mm

- 2 layers

- 2 layers60 × 25 mm

- 2 layers44.5 × 30.5 mm

- 2 layers19 × 23.5 mm

- 2 layers19 × 23.5 mm

- 2 layers32.9 × 30.5 mm

Similar boards
- 2 layers100 × 100 mm

Heatplate v1.1
DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate
57 parts179MIT - 2 layers85 × 85 mm

- 2 layers

Rtc pcb
arpandebnath56/RTC-PCB-Design
KiCad-based RTC Module PCB design featuring circuit schematics, PCB layout, 3D visualization, and custom footprint integration.
10 parts - 2 layers99.9 × 79.3 mm

Led controller
azaslavskis/WLED-Controller
Simple project that takes care of LED strips and connect them using esp32 to home assistant interface
65 partsMIT - 2 layers80 × 75 mm

Planta control
cesar191/diseno_PCB
diseño de una pcb de control el cual puede tener diferentes estructuras
55 parts - 2 layers73 × 77 mm

TwomesSensor
energietransitie/twomes-temp-monitor-hardware
Open hardware design files for the Twomes Temperature Monitor hardware
50 parts - 2 layers99.9 × 73.7 mm

Incubator bottom
Hackuarium/simple-incubator
The goal is to create a simple controller of temperature for an incubator.
57 parts - 2 layers98 × 98 mm

Questions
How big is the Walkure motherboard PCB?
It measures 240 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Walkure motherboard use?
69 parts, built around the DS18B20Z and TXB0102DCU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Walkure motherboard KiCad files?
From the About-Time-Technologies/roh-breakouts repository on GitHub, at the commit this page was made from: the board is walkure-motherboard/walkure-motherboard.kicad_pcb and its schematic 12-to-24-boost-4A/12-to-24-boost-4A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Walkure motherboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask About-Time-Technologies before reusing the design.