Skip to the content
2 layers268.3 × 102.8 mmSwepp, the printed circuit board in 3D

Minimal splayed split keyboard

Size
268.3 × 102.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
54
Pads
416
Tracks, vias
280, 10
Pours
6
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
14 Nov 2023
Updated
14 Nov 2023

Overview

Swepp is an open-source printed circuit board by sebastian-stumpf, from the sebastian-stumpf/swepp repository on GitHub, published under the MIT licence. It is a 2-layer board of 268.3 × 102.8 mm with 56 parts on 54 nets, routed with 280 tracks and 10 vias.

Its parts include 2 ICs, 2 connectors and 2 switches. It belongs with the keyboards and input boards of this library.

README

README.md

swepp

swepp

Attention

I'm a hobbyist/amateur at best. So there may be things that aren't optimized. That being said I've had the files in the gerbers/ directory manufactured at JLC with 1.6mm thickness and they work just fine with my fork of the qmk repository directory. So if you decide to use this, then please be advised that I'm not providing any sort of liability and you should exercise some caution.

Case

There are three options for the case: The first one is a simple FR4 stack. You'll need some M2 spacers and screws to fix it all together. Plates and bottoms are reversible. The second option is a simple tray case. You'll need M2 heat inserts and screws to fix the plate to the bottom. If you don't like the 3d printed plate you can also use the FR4 plate with spacers in this case. The final option is a massive gasket mounted case that hides the switches.

BOM

QuantityItemComment
2Helios or Liatris Controller
2IC-Sockets+Pins for MCUOptional but recommended
2TRRS Sockets
2SKHLLBA010 buttons
34MX Hotswap Sockets
34MX Switches + Keycaps
12M2 Screws(countersunk for gasket case)
12M2 heat insertsOnly for the 3d printed cases

Firmware

See my fork of the qmk repository. Nothing special here. You can just copy the code over to your own repository and adjust the keymap.

Feedback

I'm always happy to hear your opinions about this and if you decide to build this board then please do send me a picture of it.

Parts

56
QtyValueFootprintReferences
34MX_SW_HSsepp:SW_MX_HS_1uMX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +18
12MountingHoleMountingHole:MountingHole_2.2mm_M2_DIN965H1, H2, H3, H4, H5, H6, H7, H12, H14, H15, H16, H18
4mousebitessepp:breakaway-mousebitesH8, H9, H10, H11
2Liatrismarbastlib-xp-promicroish:Liatris_AH_USBdnU1, U2
2MJ-4PP-9sepp:MJ-4PP-9J1, J2
2SW_Pushsepp:top_resetSW1, SW2

Similar boards

  • 2 layers90 × 38 mmLCD OLinuXino-5TS Rev.B, the printed circuit board in 3D

    LCD OLinuXino-5TS Rev.B

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    56 parts1.5k
  • 2 layers50.4 × 48.4 mmDistortion, the printed circuit board in 3D

    Distortion

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    56 parts915
  • 2 layers27 × 24.7 mmKawaiiSD, the printed circuit board in 3D

    KawaiiSD

    mackieks/Kawaii

    Tiny, beautiful metal Wii keychain

    56 parts374
  • 2 layers123.9 × 94.4 mmRoba L, the printed circuit board in 3D

    Roba L

    kumamuk-git/roBa

    56 parts363GPL-3.0
  • 2 layers120.6 × 85.5 mmKLOTZ, the printed circuit board in 3D

    KLOTZ

    GEIGEIGEIST/KLOTZ

    KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.

    56 parts287GPL-3.0
  • 2 layers136 × 91.7 mmOne, the printed circuit board in 3D

    One

    ergonautkb/one

    Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.

    56 parts210CERN-OHL-P-2.0
  • 2 layers78.5 × 69 mmKicad cpu board, the printed circuit board in 3D

    Kicad cpu board

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    56 parts171
  • 2 layers45 × 45 mmAeroq Hardware v3, the printed circuit board in 3D

    Aeroq Hardware v3

    EnriqueNeyra/Aeroq

    An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54

    56 parts130

Questions

How big is the Swepp PCB?

It measures 268.3 × 102.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Swepp use?

56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Swepp KiCad files?

From the sebastian-stumpf/swepp repository on GitHub, at the commit this page was made from: the board is pcb/swepp.kicad_pcb and its schematic pcb/swepp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Swepp design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).