2 layers100 × 100 mm
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT
2 layers
ESP Programmer
se1exin/ESP8266-Programmer-BoardRequires USB UART Breakout - https://www.sparkfun.com/products/13830
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 11
- Pads
- 35
- Tracks, vias
- 76, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Dec 2023
- Updated
- 26 Dec 2023
Overview
ESP Programmer is an open-source printed circuit board by se1exin, from the se1exin/ESP8266-Programmer-Board repository on GitHub. It is a 2-layer board with 9 parts on 11 nets, routed with 76 tracks and 0 vias.
It is built around the ESP-01 and ESP8266EX. Its parts include 5 resistors, 3 connectors and 1 capacitor. It belongs with the interfaces and adapters boards and the ESP8266 boards of this library.
Main components
2
ESP-01
插件-20℃~+85℃ -90dBm 16dBm 2.4GHz 20mA 300mA 3V~3.6V 802.11b/g/n ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHSAi-ThinkerWiFi Modules
ESP8266EX
QFN-32-EP(5x5)-40℃~+125℃ -91dBm 120mA 2.4GHz 2.4GHz~2.4835GHz 2.5V~3.6V 21.5dBm 50mA 72.2Mbps SPI、UART、I2C、I2S WiFi transceiver QFN-32-EP(5x5) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
README
README.mdESP8266 Programmer
Requires USB UART Breakout - https://www.sparkfun.com/products/13830
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1, R2, R3, R4, R5 |
| 1 | 100uF | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1 |
| 1 | ESP-01 | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J2 |
| 1 | ESP8266 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | USB-Serial | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
Questions
What parts does the ESP Programmer use?
9 parts, built around the ESP-01 and ESP8266EX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP Programmer KiCad files?
From the se1exin/ESP8266-Programmer-Board repository on GitHub, at the commit this page was made from: the board is ESP Programmer.kicad_pcb and its schematic ESP Programmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP Programmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask se1exin before reusing the design.
Similar boards
- 2 layers50 × 100 mm
DMX CTRL
michar71/DMX_CTRL
DMX512 Controller for light installations based on Bluepill STM32F103 Board
46 parts12 - 2 layers68.6 × 95.3 mm
- 2 layers30 × 17 mm
MK312WIFI
Rangarig/MK312WIFI
A replacement for the MK312's bluetooth adapter that allows to connect to it via wifi ... or comport
7 parts7GPL-3.0 - 4 layers100 × 50 mm
Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5 - 2 layers102.9 × 52.1 mm
Uarm
beckdac/uArm-MicroView-esp8266
uArm control PCB with MicroView (Arduino w/ OLED) and esp8266 WiFi/UART bridge
14 parts4GPL-3.0 - 2 layers204.5 × 121.9 mm
- 2 layers98 × 91.1 mm
Soil Sensor Hub
ArtoLabs/Sensi-pot
Collection of modules for indoor/outdoor gardening automation and environmental control
78 parts3MIT