
Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32

upgrades for the 3018 pro CNC router
Isolated probe is an open-source printed circuit board by sdp8483, from the sdp8483/cnc_3018_pro repository on GitHub. It is a 2-layer board of 31 × 20 mm with 10 parts on 7 nets, routed with 22 tracks and 0 vias.
It is built around the B0505S-1W. Its parts include 2 capacitors, 2 resistors, 2 ICs and 2 connectors. It belongs with the sensors and measurement boards of this library.
Upgrades for the 3018 pro CNC router
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 4k7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | B0505S-1W | Converter_DCDC:Converter_DCDC_TRACO_TEA1-xxxx_THT | U1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U2 |

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32

tombueng/LuxDMX
Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.

hiro-akihabara/OpnBeat
OpnBeat is open source Lo-fi sampler project



kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.

max-verem/stm32_ltc_encoder
STM32 based SMPTE Linear Timecode Generator/Reader, isolated input/output

GadgetReboot/Remote_Relay
Remotely control a relay over WiFi or UART pins (use a TTL to RS485 or Bluetooth module etc)
It measures 31 × 20 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the B0505S-1W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sdp8483/cnc_3018_pro repository on GitHub, at the commit this page was made from: the board is isolated_probe/pcb/isolated_probe.kicad_pcb and its schematic isolated_probe/pcb/isolated_probe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sdp8483 before reusing the design.