2 layers98 × 27.9 mm
Avionics breakout PCB
scottzach1/Project-Beans
VUW Engineering project to deliver a model rocket for a client.
17 parts3MIT
4 layers100.3 × 29 mm
RocketPCB
scottzach1/Project-Beans3VUW Engineering project to deliver a model rocket for a client.
- Size
- 100.3 × 29 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 91
- Pads
- 336
- Tracks, vias
- 578, 28
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Oct 2020
- Updated
- 21 Oct 2020
Overview
RocketPCB is an open-source printed circuit board by scottzach1, from the scottzach1/Project-Beans repository on GitHub, published under the MIT licence. It is a 4-layer board of 100.3 × 29 mm with 76 parts on 91 nets, routed with 578 tracks and 28 vias.
It is built around the MPL3115A2R1, TPS63060DSC and UCC381DP-3, with the DMG2301L and MBR0540 among its other parts. Its parts include 28 capacitors, 17 resistors, 8 ICs, 4 diodes and 3 connectors. It belongs with the STM32 boards of this library.
Main components
5
MPL3115A2R1
LGA-8(3x5)-40℃~+85℃ 0.05Kpa 0.4Kpa 1.95V~3.6V 1s 2uA 50Kpa~1.1bar I2C LGA-8(3x5) Pressure Sensors ROHSNXP SemiconductorsPressure Sensors
TPS63060DSC
UncategorisedTexas Instruments
UCC381DP-3
SOIC-80℃~+70℃ 1 1A 3.3V 400uA 600mV@(1A) 9V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsUncategorised
DMG2301L
SOT-23-55℃~+150℃ 1 P-Channel 1.2V 1.5W 150mΩ@2.5V 20V 3A 5.5nC@4.5V P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
MBR0540
SOD-123-55℃~+150℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
README
hardware_package/avionics_pcb/avionics_base_station/README.mdAvionics Base Station PCB
This PCB is designed to interface the NodeMCU microcontroller with the RFM98 radio module. This board will act as the base station that will connect the ground control computer.
This PCB has been designed for a single layer, meaning that it is feasible to mill this PCB.
To assemble this unit, either directly solder the NodeMCU unit to the board, or solder on female headers with which to connect it. Then solder on the RFM98 castellated module and connect a solid core wire to the antenna.
Schematic
PCB Routing
Assembled Unit
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C6, C9, C12, C15, C20, C28 |
| 7 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C19, C21, C23, C26, C27 |
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5, C8, C10, C11, C16, C29 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R4, R6, R7, R11 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C18, C24 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric | C31, C32, C33 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D3, D4 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3, TP4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R10 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R12, R16 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R13, R17 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Motor_Servo_JR | GPS_head0:JR_servo_connector | M1, M2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 1uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 2.2M | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 46 | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | Conn_01x03_Female | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | Ferrite_Bead | Resistor_SMD:R_0402_1005Metric | FB1 |
| 1 | GPS_header | GPS_head0:GPS_header_fp | U8 |
| 1 | MBR0540 | Diode_SMD:D_SOD-123 | D2 |
| 1 | MPL3115A2 | Package_LGA:NXP_LGA-8_3x5mm_P1.25mm_H1.1mm | U7 |
| 1 | MPU6050_BO_FP | GPS_head0:MPU6050-footprint | U4 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3BT-DSF-PEJS | J2 |
| 1 | Polyfuse | Fuse:Fuse_Littelfuse_395Series | F1 |
| 1 | Radio_Header | GPS_head0:gps_header_footprint | U3 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TPS63060 | Package_SON:Texas_S-PWSON-N10_ThermalVias | U9 |
| 1 | UCC381DP-3 | 3v3 _linReg:SOIC127P599X175-8N | U2 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | W25Q16JV | GPS_head0:W25Q16JV_footprint | U5 |
The 72 most common of 76 parts.
Questions
How big is the RocketPCB PCB?
It measures 100.3 × 29 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RocketPCB use?
76 parts, built around the MPL3115A2R1, TPS63060DSC, UCC381DP-3 and DMG2301L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RocketPCB KiCad files?
From the scottzach1/Project-Beans repository on GitHub, at the commit this page was made from: the board is hardware_package/avionics_pcb/full_PCB/RocketPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RocketPCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from scottzach1/Project-Beans
3- 2 layers52.7 × 33 mm
Avionics base station
scottzach1/Project-Beans
VUW Engineering project to deliver a model rocket for a client.
9 parts3MIT - 2 layers
RocketPCB
scottzach1/Project-Beans
VUW Engineering project to deliver a model rocket for a client.
7 parts3MIT
Similar boards
- 4 layers60 × 60 mm
UNSW Rocketry Senior Flight Computer
DashiellRussell/UNSW_Rocketry_Senior_Flight_Computer
KiCad project for the senior flight computer used by UNSW Rocketry.
132 parts - 2 layers99.5 × 124.8 mm
B Sides 2024
OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences
151 parts3 - 2 layers181 × 108.2 mm
Lcd standard-7R-8048
rohamid/lcd-east-rising-backpack
PCB controller backpack for east rising LCD modules
114 parts - 2 layers25.9 × 17 mm
SnapVCC
electronut/ElectronutLabs-snapVCC
A tiny 3.3 V / 5 V voltage regulator that snaps right on top of a 9 volt battery.
45 parts77 - 2 layers65 × 95 mm
CassetteCat RevA
samyyy2311/CassetteCat
A music player for Android. Plays your own files, Jellyfin and Navidrome/Subsonic servers, and internet radio, with synced lyrics, an equalizer, Android Auto and a Listening Record. No account or tracking.
52 parts23GPL-3.0 - 2 layers65 × 120 mm
Nomad
0Zane/Nomad
One Adventure - One device,Nomad is a custom outdoor mobile device built around the ESP32-S3. It is designed for explorers, researchers, and outdoor enthusiasts who need reliable positioning, long-range communication…
81 parts17MIT - 4 layers17.8 × 41.9 mm
- 4 layers86.4 × 54.6 mm
RoboCape
PREDICT-EPFL/RoboCape
This repository is dedicated to a Beaglebone cape extension developped at EPFL in the Automatic Control Laboratory.
114 parts4