2 layers34.5 × 14.2 mm
2 layers34.5 × 14.2 mm
Can Module
scottcjx/Can-Module- Size
- 34.5 × 14.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 25
- Pads
- 58
- Tracks, vias
- 96, 25
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Dec 2023
- Updated
- 20 Dec 2023
Overview
Can Module is an open-source printed circuit board by scottcjx, from the scottcjx/Can-Module repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 34.5 × 14.2 mm with 13 parts on 25 nets, routed with 96 tracks and 25 vias.
It is built around the SN65HVD230D. Its parts include 4 capacitors, 3 resistors, 3 connectors, 2 ICs and 1 crystal.
Main components
1Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C101, C102 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R101, R102 |
| 2 | 20p | Capacitor_SMD:C_0402_1005Metric | C103, C104 |
| 2 | Can Connect | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J101, J102 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R103 |
| 1 | 40MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y101 |
| 1 | Can Termination | NVF-Kicad:PinHeader_1x02_P2.54mm_Horizontal | J103 |
| 1 | MCP2515-xST | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U102 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U101 |
Questions
How big is the Can Module PCB?
It measures 34.5 × 14.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Can Module use?
13 parts, built around the SN65HVD230D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Can Module KiCad files?
From the scottcjx/Can-Module repository on GitHub, at the commit this page was made from: the board is HDK/CM-2515/Can-Module.kicad_pcb and its schematic HDK/CM-2515/Can-Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Can Module design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from scottcjx/Can-Module
1Similar boards
- 4 layers106 × 98 mm
Motion control
menloresearch/asimov-1
v1 of Asimov, an open-source humanoid robot
76 parts1.4kCERN-OHL-S-2.0 - 2 layers40.5 × 58 mm
Initial v
tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim
30 parts1kApache-2.0 - 4 layers42 × 42 mm
- 4 layers85 × 85 mm
- 2 layers120 × 80 mm
Rx72t 100 pga usb
hirakuni45/RX
Renesas RX Microcontroller, C++ framework, Library, Sample
113 parts86BSD-3-Clause - 2 layers43 × 43 mm
TurboCAN
henrikssn/TurboCAN
This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also be used on similar toolheads using NEMA17 steppers.
88 parts82 - 4 layers35 × 35 mm
Lemon pepper
VIPQualityPost/lemon-pepper-stepper
simplefoc all-in-one 50W hybrid stepper + bldc driver
87 parts75MIT - 2 layers96 × 74.4 mm
Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45