Skip to the content
2 layers46 × 100 mmBackplane, the printed circuit board in 3D

Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)

Size
46 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
65
Nets
92
Pads
298
Tracks, vias
716, 118
Pours
9
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
31 Jul 2023
Updated
2 Sep 2023

Overview

Backplane is an open-source printed circuit board by Scottapotamas, from the Scottapotamas/spe-marine-node repository on GitHub, published under the MIT licence. It is a 2-layer board of 46 × 100 mm with 65 parts on 92 nets, routed with 716 tracks and 118 vias.

It is built around the AP2112K-3.3, USBLC6-4 and 2N7002P. Its parts include 19 connectors, 16 resistors, 3 capacitors, 3 diodes and 3 crystals.

Main components

3

README

README.md

Underwater Sensor Node with Single Pair Ethernet

Prototype project to build a underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg Type E Class 10-12).

test-mounted

A more detailed write-up can be read on Electric UI's blog.

Mechanical

test-jetty

Housing

The body of the sensor node is a 2″ acrylic tube (~58mm OD), with a pair of aluminium end-caps. This provides a working volume constrained by the 50 mm internal diameter and ~118 mm maximum gap between caps.

mech-side-view

The top cap/bulkhead has 4×M10 threaded holes for accessories as part of BlueRobotic's hardware ecosystem. The assembled prototype is fitted with:

  • 4.5mm Wetlink penetrator for the tether cable
  • 10m rated pressure sensor
  • White indicator LED
  • Pressure relief/test valve

Whilst this prototype won't see properly deep water, this tube arrangement should be capable of 200m operation, and far deeper if an aluminium sleeve is used.

CAD models and assemblies are in /mechanical/tube/. Off-the-shelf parts are in /mechanical/tube/cots/.

Internal brackets

A pair of 3D printed board mounts use the 4×M3 internal mounting holes in the bulkheads.

mech-pcb-mounts

CAD models and STL files are in /mechanical/tube/.

Mounting

The tube itself doesn't have any features for mounting, so a pair of custom tube clamps were printed with the general goal of providing generic strap or wire mounting points.

Files are in /mechanical/mount/.

Electronics

Compatibility with the Sparkfun MicroMod ecosystem has been maintained where possible - building off of Sparkfun's ADIN1110 function board for bring-up and early software tests.

PCB's were designed with KiCAD 7. Project files, gerbers and schematic PDF's are in /electronics/.

A small collection of calculator spreadsheets were made to help during the design process - these are in /docs and use Open Office .ods format.

Version 1.0 boards do have some minor issues which were tweaked during bench testing, so I'd recommend reviewing things thorough before copying anything into your designs.

Backplane

Acting as the MicroMod 'carrier', providing the processor and function board connections, as well as regulation, I2C headers, and breakout pads for spare/conflicted IO. It also serves as the mounting interface for sensor payloads and custom hardware.

render-backplane-overview

It's a 46×100 mm 1.6 mm 2-layer board with pretty relaxed fabrication requirements.

PD and PSE Function Boards

Both boards implement the ADIN1110 SPE transceiver in a similar manner to Sparkfun's function board, but exist as two variants which improve over the dev-kit by adding:

  • Circuitry to act as a Class 10-12 PoDL power supply aka PSE (pictured below on left).

  • VID circuitry to signal compliance as a Class 10-12 PoDL powered device aka PD (pictured on right).

    render-fn-boards

These boards only provide detection, not classification via SCCP, and as such runs in 'fast-start mode'.

The PCB's are A×B mm, 0.8mm thick, 2-layer boards which can be manufactured with commodity fabs. I just used the raw straight PCB edge-connector without issues, but for best practice and/or frequent insertion cycles the edge-connector should be bevelled.

The blog post describes PoDL circuit behaviour and integration in more detail.

Sensors

The project was designed without assuming any specific sensors would be used, but I used these I2C sensors:

Firmware

I used an ESP32 MicroMod processor board along with the Arduino toolchain. As such, there are external dependencies on the ESP32 Arduino core, electricui-embedded, and Sparkfun packages for their ESP32 boards, LSM6DS0, SHTC3 and ADIN1110 libraries.

I also depend on my own MS5837 library (external to this repo) for working with the pressure sensor.

The /firmware folder has some of the test-sketches written during testing:

  • spe-pse-io - Bench-test PoDL PSE behaviour with a simple state-machine
  • lsm6ds0-fifo-test - Configures and reads IMU samples periodically from the buffer
  • led-io-test - Rough test using Pololu's APA102 library to check the 2×24 LED rings
  • spe-eui-bridge - Transparent proxy of electricui-embedded packets with ADIN1110 raw buffers to serial ports.

These sketches weren't written to act as examples or as reference material, and should be treated accordingly.

The main firmware is actually rather straightforward, running a superloop which runs each sub-system at a defined rate. Sub-systems never block, and are generally only responsible for their own behaviour.

TODO: Cleanup and merge branches/sources into this repo

User Interface

TODO: Cleanup and merge sources into this repo

The user interface is built with Electric UI, and can be built and run by invoking arc start from /interface.

It handles visualisation of data streaming off the sensor node, and provides additional statistics and logging.

ui-screenshot

TODO: Write part 2 post on data processing and visualisation

Additional Notes

If you're planning on replicating this project, or part of it, some additional points of interest:

  • I'm happy to answer questions or help with design changes to suit your ocean research project.
    • I'm also generally open to consulting work!
  • Firmware is pretty specific to my own tooling and relies on external libraries for sensors and the Arduino ESP32 core.
  • Read over BlueRobotics's guides for Wetlink penetrator use, enclosure assembly, pressure testing.
    • Definitely do remember to lubricate o-rings and the tube bulkheads as you slide them into the cylinder. It's very difficult to get them out dry...
  • The tube as designed and pictured is positively buoyant and might need additional ballast weight depending on your application and safety requirements around handling.

Its also worth mentioning that the entire detailed conceptualisation, design, ordering, assembly, testing and writeup occurred in August 2023. There were many late nights, and as a result some design choices were made with simplicity or time-frame in mind.

Parts

65
QtyValueFootprintReferences
14PAD_SOLDER_2mmApplidyne_Connector:PAD_SOLDER_2mmP1, P5, P6, P7, P8, P9, P11, P12, P13, P14, P15, P16, P17, P18
5SOLDER-LINK-2-TINYApplidyne_Link:SJ1005-2NSL1, SL4, SL5, SL6, SL7
410K0_1608MApplidyne_Resistor:RESC1608X50NR7, R9, R11, R12
44K7_1608MApplidyne_Resistor:RESC1608X50NR1, R2, R3, R4
4M2.5_SMD_4.0MM_THREADEDApplidyne_Mount:9774040151RMNT4, MNT5, MNT6, MNT7
310u_X7R_2012MApplidyne_Capacitor:CAPC2012X110NC1, C2, C3
3JST_SH_4_RAApplidyne_Connector_JST:SM04B-SRSS-TBP2, P3, P4
3M2.5_SMD_2.5MM_THREADEDApplidyne_Mount:9774025151RMNT1, MNT2, MNT3
20.5A_1210L_PTCApplidyne_Fuse:FUSC3225X85L50NF1, F2
2100K_1608MApplidyne_Resistor:RESC1608X50NR15, R16
240V_500mA_SOD323Applidyne_SOD:SOD2512X110ND2, D3
24K99_1608MApplidyne_Resistor:RESC1608X50NR5, R6
2B3U-1000P_SPST-NO_SMDApplidyne_Switch:B3U-1000PSW1, SW2
2PROBE_PADApplidyne_Test:TP200TEST1, TEST2
10R_QUAD_ARRAY_1608MApplidyne_Resistor:R_Array_Concave_4x1608MR14
110R_1608MApplidyne_Resistor:RESC1608X50NR8
11K00_1608MApplidyne_Resistor:RESC1608X50NR13
120K0_1608MApplidyne_Resistor:RESC1608X50NR10
12N7002PApplidyne_SOT:SOT95P240X110-3L16NQ1
1AP2112K-3.3Applidyne_SOT:SOT95P280X145-5L30NU9
1CONN_01X03Applidyne_Connector_Wurth:61300311121P10
1LED_YELLOW_1608MApplidyne_LED:LEDC1608X80L40ND1
1MICROMOD_FUNCTION_BOARD_SOCKETApplidyne_Connector_TE_Connectivity:TE_2199230-4X3
1MICROMOD_PROCESSOR_SOCKETApplidyne_Connector_TE_Connectivity:TE_2199230-4X1
1SWD_SMT_SOCKETApplidyne_Connector:CNCTECH_3220-10-0300-00X2
1USBLC6Applidyne_SOT:SOT95P280X145-6L50NU1
1USB_C_SOCKET_RA_PTH_SIMPLEApplidyne_USB:USB_C_PTH_GCT_USB4085J1

More from Scottapotamas/spe-marine-node

3
  • 2 layers38 × 65 mmSpe sink, the printed circuit board in 3D

    Spe sink

    Scottapotamas/spe-marine-node

    Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)

    99 parts34MIT
  • 2 layers38 × 65 mmSpe source, the printed circuit board in 3D

    Spe source

    Scottapotamas/spe-marine-node

    Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)

    99 parts34MIT
  • 2 layers45 × 45 mmInterior lighting, the printed circuit board in 3D

    Interior lighting

    Scottapotamas/spe-marine-node

    Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)

    46 parts34MIT

Similar boards

  • 4 layers220 × 120 mmElectricui arena, the printed circuit board in 3D

    Electricui arena

    electricui/electricui-arena

    Hardware for continuous integration testing of serial interfaces and microcontrollers

    268 parts27MIT
  • 2 layers91.3 × 53.3 mmTimep, the printed circuit board in 3D

    Timep

    Matir/timep

    Test Interface for Multiple Embedded Protocols

    89 parts25Apache-2.0
  • 4 layers80 × 55 mmAutomoto, the printed circuit board in 3D

    Automoto

    sorcnr/automoto

    a copy of openremote

    62 parts
  • 4 layers199.9 × 69.3 mmZaphod controller, the printed circuit board in 3D

    Zaphod controller

    Scottapotamas/zaphod-bot

    A DIY high performance delta-bot for fun, and lightpainting...

    251 parts53
  • 2 layers39.6 × 23.2 mmDetector, the printed circuit board in 3D

    Detector

    Ttl/detector

    RF power detector board design files

    52 parts20
  • 2 layers120 × 80 mmTrackerAVL, the printed circuit board in 3D

    TrackerAVL

    brengi/CESE-PCB

    Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos

    173 parts7
  • 2 layers42.5 × 62.5 mmEvse, the printed circuit board in 3D

    Evse

    Tinkerforge/evse-bricklet

    This Bricklet together with the ESP32 Brick the RS485 Bricklet and the NFC Bricklet form the hardware used in the WARP Charger

    92 parts3
  • 4 layers84 × 56.5 mmUsb xwitch, the printed circuit board in 3D

    Usb xwitch

    RunLit/usb-xwitch

    A software controlled usb switch

    149 parts2

Questions

How big is the Backplane PCB?

It measures 46 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Backplane use?

65 parts, built around the AP2112K-3.3, USBLC6-4 and 2N7002P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Backplane KiCad files?

From the Scottapotamas/spe-marine-node repository on GitHub, at the commit this page was made from: the board is electronics/backplane/backplane.kicad_pcb and its schematic electronics/backplane/backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Backplane design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).