
ProbeBoardPublicV5
novintic/FlukeEmu-FluCom
HW/SW solution for Fluke 9010 mainframe emulation

PCB for Daisy Seed MultiFX
SeedMultiFX is an open-source printed circuit board by scooberts, from the scooberts/MultiFX_Board repository on GitHub. It is a 2-layer board of 110 × 65 mm with 78 parts on 76 nets, routed with 305 tracks and 26 vias.
It is built around the RQ5E035ATTCL and TP1. Its parts include 29 resistors, 16 capacitors, 7 diodes, 7 connectors and 4 switches.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1u | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1, C3, C4, C10, C11, C12 |
| 6 | 27k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7, R8, R9, R22, R23, R24 |
| 5 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R17, R20, R21, R29 |
| 4 | 10n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C8, C9, C16, C17 |
| 4 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18, R19, R27, R28 |
| 4 | 470k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R12, R14 |
| 4 | LED | LED_THT:LED_D3.0mm | D3, D4, D5, D6 |
| 4 | ~ | .myparts:TaydaFemaleJack | J1, J2, J3, J4 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R16 |
| 2 | 100u | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C5, C15 |
| 2 | 180 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R15 |
| 2 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R13 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R25, R26 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11 |
| 2 | 47n | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C2, C13 |
| 2 | RotaryEncoder_Switch | .myparts:Quadrature Encoder | SW1, SW6 |
| 2 | SW_SPDT | .myparts:SPDT_MiniToggle | SW4, SW5 |
| 1 | .1u | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C7 |
| 1 | .22u | Capacitor_THT:C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C6 |
| 1 | 1N4002 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D7 |
| 1 | Barrel_Jack_Switch | .myparts:DCPower2.1mm | J5 |
| 1 | Conn_01x07_Pin | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J6 |
| 1 | Jumper_2_Bridged | .myparts:Jumper | JP1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | RQ5E035AT | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | TP1 | .myparts:Plated Hole | JI1 |
| 1 | TP10 | .myparts:Plated Hole | LED1 |
| 1 | TP11 | .myparts:Plated Hole | LED2 |
| 1 | TP2 | .myparts:Plated Hole | JO1 |
| 1 | TP3 | .myparts:Plated Hole | FXI1 |
| 1 | TP4 | .myparts:Plated Hole | JI2 |
| 1 | TP5 | .myparts:Plated Hole | FX01 |
| 1 | TP6 | .myparts:Plated Hole | FXI2 |
| 1 | TP7 | .myparts:Plated Hole | FX02 |
| 1 | TP8 | .myparts:Plated Hole | JO2 |
| 1 | TP9 | .myparts:Plated Hole | GND1 |
| 1 | ~ | .myparts:Jumper3 | J7 |
| 1 | ~ | Module:Electrosmith_Daisy_Seed | SEED1 |
The 77 most common of 78 parts.

novintic/FlukeEmu-FluCom
HW/SW solution for Fluke 9010 mainframe emulation


autonomous-ai/autonomous-circuit
Chat with AI, get a verified PCB and a fab packet you can order.

cc90202/DCC-esp32
DCC command station for ESP32-C6 — NMRA-compliant model railroad controller in Rust



DIY-Nabra/nabrafootprints
KiCAD footprints for the symbols used in Ciat-Lonbarde paper circuits

AwesomeAudioApparatus/demiurge
Demiurge is a combination of Hardware and Software for Digital Sound Processing in the Eurorack Modular Synthesizer environment.
It measures 110 × 65 mm and has 2 copper layers, 1.6 mm thick.
78 parts, built around the RQ5E035ATTCL and TP1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the scooberts/MultiFX_Board repository on GitHub, at the commit this page was made from: the board is SeedMultiFX.kicad_pcb and its schematic SeedMultiFX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask scooberts before reusing the design.