Skip to the content
2 layers85 × 49 mmPicoBoard, the printed circuit board in 3D

This repository will hold the schematics, code and other stuff regaurding my 2.4 GHz radar project.

Size
85 × 49 mm
Copper layers
2
Thickness
1.6 mm
Parts
147
Nets
11
Pads
335
Tracks, vias
88, 3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
7 Sep 2022
Updated
26 Jan 2023

Overview

PicoBoard is an open-source printed circuit board by sckzor, from the sckzor/RadarProject repository on GitHub, published under the MIT licence. It is a 2-layer board of 85 × 49 mm with 147 parts on 11 nets, routed with 88 tracks and 3 vias.

It is built around the DMG2301L. Its parts include 4 resistors, 3 connectors, 1 IC and 1 transistor. It belongs with the RP2040 boards of this library.

Main components

1

Parts

147
QtyValueFootprintReferences
132Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical, , , , , , , , , , , , , , , +116
4MountingHoleMountingHole:MountingHole_2.7mmH1, H2, H3, H4
21kResistor_SMD:R_0805_2012MetricR2, R3
22kResistor_SMD:R_0805_2012MetricR1, R4
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ1
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_HorizontalJ3
1DMG2301LPackage_TO_SOT_SMD:SOT-23Q1
1LOGOLOGOMeow!
1RPi_Pico_SMD_THMCU_RaspberryPi_and_Boards:RPi_Pico_SMD_THU1

The 146 most common of 147 parts.

More from sckzor/RadarProject

1
  • 4 layers85 × 49 mmRadarProject, the printed circuit board in 3D

    RadarProject

    sckzor/RadarProject

    This repository will hold the schematics, code and other stuff regaurding my 2.4 GHz radar project.

    65 parts5MIT

Similar boards

  • 4 layers70 × 72 mmSPINC AA Charger, the printed circuit board in 3D

    SPINC AA Charger

    CoretechR/SPINC

    DIY Automatic Battery Charger Using RP2040

    101 parts467GPL-3.0
  • 4 layers70 × 54 mmPicoLab, the printed circuit board in 3D

    PicoLab

    CoretechR/PicoLab

    Web-GUI Embedded Multitool

    285 parts327GPL-3.0
  • 2 layers192.4 × 50 mmOmote, the printed circuit board in 3D

    Omote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    187 parts157GPL-3.0
  • 4 layers55 × 97 mmMelodio SelfMate V2, the printed circuit board in 3D

    Melodio SelfMate V2

    zeeblaze/Melodio-SelfMate

    Your Ultimate Portable Music Companion For Home Automation.

    121 parts53
  • 2 layers75.8 × 19.2 mm3S coinCellChargeController, the printed circuit board in 3D

    3S coinCellChargeController

    PocketConcepts/Pocket_PSU

    A variable current & voltage PSU with 3S lipo charging, balancing, and protection circuit using PPS.

    78 parts36
  • 2 layers51.8 × 51.8 mmPawpet, the printed circuit board in 3D

    Pawpet

    NanoCodeBug/pawpet

    A virtual pet using the atsamd21g and sharp memory lcd, runs off of 2xAAA for a couple of months. See PawPet on Hacakday.io for full gallery.

    41 parts20
  • 4 layers68.8 × 90.3 mmHorizon, the printed circuit board in 3D

    Horizon

    Horizon-Avionics/Horizon-H1

    Building a fully open-source flight computer for amateur rocketry!

    173 parts17
  • 2 layers69 × 72 mmMMv3, the printed circuit board in 3D

    MMv3

    MrCroesus/MMv3

    MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.

    47 parts16Apache-2.0

Questions

How big is the PicoBoard PCB?

It measures 85 × 49 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PicoBoard use?

147 parts, built around the DMG2301L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PicoBoard KiCad files?

From the sckzor/RadarProject repository on GitHub, at the commit this page was made from: the board is PicoBoard/PicoBoard.kicad_pcb and its schematic AnalogRadar/MkII/RadarProject.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PicoBoard design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).