Skip to the content
2 layers148.8 × 47.2 mmShift register tpic6b595, the printed circuit board in 3D

Shift register tpic6b595

scimusmn/power-shift-register1

modular power shift register PCBs

Size
148.8 × 47.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
52
Nets
37
Pads
125
Tracks, vias
208, 4
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
28 Feb 2022
Updated
24 May 2022

Overview

Shift register tpic6b595 is an open-source printed circuit board by scimusmn, from the scimusmn/power-shift-register repository on GitHub. It is a 2-layer board of 148.8 × 47.2 mm with 52 parts on 37 nets, routed with 208 tracks and 4 vias.

It is built around the TPIC6B595N. Its parts include 24 diodes, 12 connectors, 8 resistors and 2 ICs.

Main components

1

README

README.md

Power Shift Registers

Modular power shift register boards, based on the TPIC6A595NE chips.

These boards come in two varieties: mother boards, which include a Metro Mini and lack a data in port, and daughter boards, which are intended to have data shifted in to them. These two designs exist so that for applications that require only shift registers no additional hardware is necessary, but custom boards can still be designed to control the daughter boards.

Parts

52
QtyValueFootprintReferences
161N4001Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D3, D4, D6, D7, D9, D10, D12, D13, D15, D16, D18, D19, D21, D22, D24
8LEDSMM:LED_D3.0mmD2, D5, D8, D11, D14, D17, D20, D23
8RSMM:Resistor_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8
8Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1, J2, J3, J4, J5, J6, J7, J8
2Conn_02x03_Odd_EvenConnector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ9, J10
2Screw_Terminal_01x02SMM:TerminalBlock-2_P5.08mm_largeJ11, J12
1I50115SMM:I50115U1
1LOGOSMM:smm-logo-25mmG***
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1TPIC6B595Package_DIP:DIP-20_W7.62mm_SocketU2

The 48 most common of 52 parts.

More from scimusmn/power-shift-register

1
  • 2 layers178.4 × 51.4 mmMother, the printed circuit board in 3D

    Mother

    scimusmn/power-shift-register

    modular power shift register PCBs

    37 parts1

Similar boards

  • 2 layers100 × 100 mmColumn driver, the printed circuit board in 3D

    Column driver

    CarlRaymond/AnnaxFlipdotDriver

    KiCad project for drivers for Annax flip-dot display panels

    104 parts44
  • 2 layers100 × 80 mmRti, the printed circuit board in 3D

    Rti

    cceh/rti

    Reflectance Transformation Imaging

    58 parts15
  • 2 layers99.1 × 99.1 mmFlipDotDriver, the printed circuit board in 3D

    FlipDotDriver

    bitluni/FlippyFlip

    49 parts14
  • 2 layers240 × 38.7 mmETAclock, the printed circuit board in 3D

    ETAclock

    drkmsmithjr/ETANixieClock

    An Estimated Time of Arrival Nixie Tube Clock Open Source Hardware Project

    126 parts6
  • 2 layers75.3 × 33.8 mm24-ch relay driver kicad, the printed circuit board in 3D

    24-ch relay driver kicad

    dilshan/24ch-usb-high-voltage-driver

    24-Channel USB high voltage driver.

    35 parts5MIT
  • 2 layers99.1 × 99.1 mmAt90s2323, the printed circuit board in 3D

    At90s2323

    atoomnetmarc/AVR-demo-board

    AVR demo boards for old AT90S* microcontrollers.

    171 parts4Apache-2.0
  • 2 layers127 × 101.6 mmLED Matrix Projectv3, the printed circuit board in 3D

    LED Matrix Projectv3

    Wil7ang/LEDMatrix

    LED Matrix display firmware.

    120 parts4GPL-2.0
  • 2 layers252.9 × 55 mmSulari 170V, the printed circuit board in 3D

    Sulari 170V

    antsakur/nixie-clock

    Open-source Nixie clock project. Gerbers, BOM and firmware.

    78 parts1

Questions

How big is the Shift register tpic6b595 PCB?

It measures 148.8 × 47.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Shift register tpic6b595 use?

52 parts, built around the TPIC6B595N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Shift register tpic6b595 KiCad files?

From the scimusmn/power-shift-register repository on GitHub, at the commit this page was made from: the board is shift-register-tpic6b595/shift-register-tpic6b595.kicad_pcb and its schematic daughter-board/daughter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Shift register tpic6b595 design in my own project?

Its repository states no licence, so its author keeps all rights: ask scimusmn before reusing the design.