2 layers96 × 100 mm
2 layers127 × 101.6 mm
LED Matrix Projectv3
Wil7ang/LEDMatrix4LED Matrix display firmware.
- Size
- 127 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 199
- Pads
- 748
- Tracks, vias
- 3,719, 245
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 26 Feb 2014
- Updated
- 5 Mar 2018
Overview
LED Matrix Projectv3 is an open-source printed circuit board by Wil7ang, from the Wil7ang/LEDMatrix repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 127 × 101.6 mm with 120 parts on 199 nets, routed with 3,719 tracks and 245 vias.
It is built around the SN74HC125N, TPIC6B595N and JUMPER3. Its parts include 88 resistors, 12 diodes, 4 connectors and 1 IC. It belongs with the lEDs and displays boards of this library.
Main components
3
SN74HC125N
DIP-14-40℃~+85℃ 1 24ns@4.5V,50pF 2V~6V 4 7.8mA 7.8mA 74HC 80uA Tri-State Unidirectional DIP-14 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
TPIC6B595N
PDIP-20-40℃~+125℃ 1 4.5V~5.5V 8 Asynchronous clear function、Output enable Open-drain Serial-to-Serial or Parallel TPIC PDIP-20 Shift Registers ROHSTexas InstrumentsShift RegistersJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
README
README.mdLEDMatrix
LED Matrix display firmware.
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | 100 | 1-8Resistor | R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40 +48 |
| 24 | R | 1-8Resistor | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +8 |
| 12 | LED_MATRIX_8X8_RG | LEDMatrix8x8 | D00, D01, D02, D03, D10, D11, D12, D13, D20, D21, D22, D23 |
| 11 | TPIC6B595N | TPIC6B595N-DIP | CD00, CD01, CD02, CD03, CD10, CD11, CD12, CD13, RD0, RD1, RD2 |
| 3 | UDN2981AT | UDN2981AT | RDD0, RDD1, RDD2 |
| 2 | CONN_2 | SIL-2 | P2, P3 |
| 2 | CONN_5 | SIL-5 | P0, P1 |
| 1 | JUMPER3 | 3-Jumper | JP1 |
| 1 | SN74HC125N | SN74HC125N | U6 |
More from Wil7ang/LEDMatrix
1Similar boards
- 2 layers150 × 140 mm
Trueskate main v1
AsherNoble/trueskate-ai-hardware
Hand-control layer for TrueSkate-AI: the agent sends touch gestures, a robotic finger performs them. Teensy 4.1 + SimpleFOC firmware, Python host.
65 parts1MIT - 2 layers61.5 × 47.5 mm
Pcb reset buffer
millimeter-wave-lab/RFSoC-MINI-2SB-Receiver
Simulink models for Digital Sideband Separation on RFSoC 4x2
13 parts - 2 layers48.1 × 77.7 mm
- 2 layers53.3 × 101.6 mm
- 2 layers100 × 100 mm
Column driver
CarlRaymond/AnnaxFlipdotDriver
KiCad project for drivers for Annax flip-dot display panels
104 parts44 - 2 layers100 × 80 mm
- 2 layers99.1 × 99.1 mm
- 2 layers240 × 38.7 mm
ETAclock
drkmsmithjr/ETANixieClock
An Estimated Time of Arrival Nixie Tube Clock Open Source Hardware Project
126 parts6
Questions
How big is the LED Matrix Projectv3 PCB?
It measures 127 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LED Matrix Projectv3 use?
120 parts, built around the SN74HC125N, TPIC6B595N and JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED Matrix Projectv3 KiCad files?
From the Wil7ang/LEDMatrix repository on GitHub, at the commit this page was made from: the board is PCB/LED Matrix Project/LED Matrix Projectv3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED Matrix Projectv3 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).