Skip to the content
2 layers72 × 20 mmController, the printed circuit board in 3D

This is a 30-button Anglo Concertina MIDI controller. Click the image below to watch a short demo:

Size
72 × 20 mm
Copper layers
2
Thickness
1.69 mm
Parts
33
Nets
53
Pads
160
Tracks, vias
239, 23
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Jun 2025
Updated
7 Nov 2026

Overview

Controller is an open-source printed circuit board by schult, from the schult/midi_concertina repository on GitHub. It is a 2-layer board of 72 × 20 mm with 33 parts on 53 nets, routed with 239 tracks and 23 vias.

It is built around the STM32L072CZT6, LP5912-3.3DRVR and USBLC6-2P6, with the ESD351DPY and USB4145-03-0170-C among its other parts. Its parts include 13 capacitors, 8 resistors, 3 ICs, 3 connectors and 2 diodes. It belongs with the STM32 boards of this library.

Main components

5

README

README.md

MIDI Anglo Concertina

This is a 30-button Anglo Concertina MIDI controller. Click the image below to watch a short demo:

Demo

Build Instructions

Parts

33
QtyValueFootprintReferences
8100nFCapacitor_SMD:C_0402_1005MetricC3, C6, C7, C8, C9, C10, C11, C13
41uFCapacitor_SMD:C_0402_1005MetricC1, C2, C4, C5
21kResistor_SMD:R_0402_1005MetricR4, R5
22k2Resistor_SMD:R_0603_1608MetricR6, R8
247kResistor_SMD:R_0402_1005MetricR3, R7
25k1Resistor_SMD:R_0603_1608MetricR1, R2
2MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2
110uFCapacitor_SMD:C_0603_1608MetricC12
1DMP2004K-7Package_TO_SOT_SMD:SOT-23Q1
1ESD351Package_SON:Texas_DPY0002A_0.6x1mm_P0.65mmD2
1I2CMidiConcertina:Wuerth_WR-WST_490107670612_2x03_P2.54mm_SKEDDJ3
1LP5912-3.3DRVPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalViasU1
1REDLED_SMD:LED_0603_1608MetricD1
1STM32L072CZT6Package_QFP:LQFP-48_7x7mm_P0.5mmU3
1TC2030-NLConnector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ2
1USB4145-03-0170-CMidiConcertina:USB_C_Receptacle_GCT-USB4145J1
1USBLC6-2P6Package_TO_SOT_SMD:SOT-666U2
1~Button_Switch_SMD:SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxGSW1

More from schult/midi_concertina

2
  • 2 layers82 × 60 mmAngloRightKeyboard, the printed circuit board in 3D

    AngloRightKeyboard

    schult/midi_concertina

    This is a 30-button Anglo Concertina MIDI controller. Click the image below to watch a short demo:

    47 parts1
  • 2 layers32 × 20 mmBellowsSensorA, the printed circuit board in 3D

    BellowsSensorA

    schult/midi_concertina

    This is a 30-button Anglo Concertina MIDI controller. Click the image below to watch a short demo:

    5 parts1

Similar boards

  • 2 layers68 × 87 mmRS485USB, the printed circuit board in 3D

    RS485USB

    jirihusak/majordomus

    Open source system for smart home

    121 parts4GPL-3.0
  • 4 layers94.5 × 99.8 mmValveController, the printed circuit board in 3D

    ValveController

    afewyards/HydroMix

    A mains-powered, Zigbee-connected controller for a hydronic 3-way mixing valve — it regulates the supply-water temperature of a floor heating/cooling system and keeps regulating autonomously if the Zigbee link goes down.

    123 partsMIT
  • 4 layers100 × 70 mmData port x4, the printed circuit board in 3D

    Data port x4

    kartben/hw-testing-rack

    3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer

    290 parts
  • 4 layersBeamformer, the printed circuit board in 3D

    Beamformer

    rheejason/circular-mic-array

    UIUC ECE 395: an 8-mic circular beamforming microphone array (steerable conference-table mic and acoustic imager).

    113 parts
  • 4 layers150 × 83 mmMasthead Controller, the printed circuit board in 3D

    Masthead Controller

    Tuskar-Marine/hardware

    All tools for the Mermaid's Rest open sailing tools

    230 parts6
  • 4 layers38.5 × 42 mmM FC, the printed circuit board in 3D

    M FC

    Def12345678/M-FC-G474-Rev-A

    Modular STM32G474 Flight Controller Rev-A. Focus on modularity using JST-SH connectors for all peripherals (ESC, RX, etc.). ICM-42688-P IMU and DPS368 barometer. Requires external 5V 2.5A (no onboard BEC).

    112 partsMIT
  • 6 layers26.9 × 26.9 mmOpenFC, the printed circuit board in 3D

    OpenFC

    OpenDrone-hw/OpenFC-Lite-Mini

    Open-source Betaflight flight controller. RP2354A, 20x20 mm, 6-layer, 3-6S, CERN-OHL-S-2.0.

    131 parts147CERN-OHL-S-2.0

Questions

How big is the Controller PCB?

It measures 72 × 20 mm and has 2 copper layers, 1.69 mm thick.

What parts does the Controller use?

33 parts, built around the STM32L072CZT6, LP5912-3.3DRVR, USBLC6-2P6 and ESD351DPY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller KiCad files?

From the schult/midi_concertina repository on GitHub, at the commit this page was made from: the board is electrical/Controller/Controller.kicad_pcb and its schematic electrical/AngloLeftKeyboard/AngloLeftKeyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask schult before reusing the design.