2 layers67 × 33 mm
SynchroDriverDS
schlae/SynchroDriver
Various boards for driving synchros and other 400Hz devices
50 parts1
2 layers100 × 100 mm
SynchroDriverD
schlae/SynchroDriver1Various boards for driving synchros and other 400Hz devices
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 252
- Nets
- 200
- Pads
- 742
- Tracks, vias
- 1,691, 358
- Pours
- 40
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jun 2025
- Updated
- 1 Nov 2026
Overview
SynchroDriverD is an open-source printed circuit board by schlae, from the schlae/SynchroDriver repository on GitHub. It is a 2-layer board of 100 × 100 mm with 252 parts on 200 nets, routed with 1,691 tracks and 358 vias.
It is built around the R-78HB12-0.5, DRV8300DIPW and LM324, with the NXU0104PWJ, CL31A106KBHNNNE and B82472G4224M000 among its other parts. Its parts include 106 resistors, 76 capacitors, 14 connectors, 12 ICs and 11 transistors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
11
R-78HB12-0.5
SIP-31 12V 17V~72V 500mA 94% SIP-3 DC-DC Power Modules ROHSRECOM PowerDC-DC Power Modules
DRV8300DIPW
TSSOP-20-40℃~+125℃ 1.5A 10ns 3 5V~20V 5ns 750mA 800uA Low Side、High Side MOSFET Under Voltage Protection、Interleaved conduction protection、Dead-time control、Built-in bootstrap diode TSSOP-20 Brushless DC (BLDC) Motor Driver ROHSTexas InstrumentsGate Drivers
LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational Amplifier
NXU0104PWJ
TSSOP-14TSSOP-14 Translators, Level Shifters ROHSNexperiaTranslators, Level Shifters
CL31A106KBHNNNE
120610uF 50V X5R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
B82472G4224M000
-1.1Ω 220uH 300mA ±20% - Power Inductors ROHSTDKPower Inductors
SIS990DN
PowerPAK1212-8-55℃~+150℃ 100V 2 N-Channel 2.5V 2.8W 250pF 3.3nC@7.5V 4.1A 5.2pF 73pF 85mΩ@10V N-Channel PowerPAK1212-8 MOSFETs ROHSVishay IntertechnologyMOSFETs
SS320LWH
SOD-123WSchottky DiodesTaiwan Semiconductor
PMEG10020AELRX
SOD-123W1 Independent 100V 2A 300nA@100V 50A 770mV@2A SOD-123W Schottky Diodes ROHSNexperiaSchottky Diodes
MMBTA42
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mV 300V 350mW 500mA 50MHz 5V NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)MMBTA92
SOT-23-55℃~+150℃ 1 PNP 100nA 200mV 300V 350mW 500mA 50MHz 5V 60 PNP SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
Parts
252| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 10K | Passive:RESC1608X55 | R2, R21, R22, R31, R32, R41, R42, R73, R78, R79, R80, R81, R82, R83, R84, R85 +9 |
| 21 | 0.1uF | Passive:CAPC1608X100 | C10, C11, C12, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C38 +5 |
| 20 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C13, C14, C15, C19, C20, C21, C41, C42, C43, C47, C48, C49, C57, C58, C59 +4 |
| 18 | 1 | Passive:RESC1608X55 | R5, R6, R7, R10, R47, R48, R49, R50, R51, R52, R59, R60, R61, R62, R63, R64 +2 |
| 10 | 1uF | Passive:CAPC2012X55 | C3, C4, C9, C37, C53, C70, C71, C75, C76, C77 |
| 9 | 10K | Passive:BOURNS_PTV09A_H | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9 |
| 9 | 220uH | Inductor_SMD:L_7.3x7.3_H3.5 | L1, L2, L3, L4, L5, L6, L7, L8, L9 |
| 9 | 5.6 | Passive:RESC2012X55 | R11, R12, R13, R53, R54, R55, R65, R66, R67 |
| 9 | 560pF | Passive:CAPC2012X55 | C16, C17, C18, C44, C45, C46, C60, C61, C62 |
| 9 | DNI | Passive:RESC2012X55 | R14, R15, R16, R56, R57, R58, R68, R69, R70 |
| 9 | DNI | Passive:CAPC2012X55 | C22, C23, C24, C50, C51, C52, C66, C67, C68 |
| 9 | SIS990 | Package_SO:Vishay_PowerPAK_1212-8_Dual | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 8 | 1K | Passive:RESC1608X55 | R19, R20, R29, R30, R39, R40, R72, R90 |
| 8 | TBD | Passive:RESC1608X55 | R99, R100, R101, R102, R103, R104, R105, R106 |
| 7 | 20K | Passive:RESC1608X55 | R1, R23, R24, R33, R34, R43, R44 |
| 7 | DNI | Passive:RESC1608X55 | R17, R18, R27, R28, R37, R38, R74 |
| 6 | 10 | Passive:RESC1608X55 | R25, R26, R35, R36, R45, R46 |
| 6 | SS320LWH | Active:SOD3716X117 | D2, D3, D4, D5, D6, D7 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 100uF | Passive:CAPAE350P800X700 | C6, C7, C8 |
| 3 | 1uF | Capacitor_SMD:C_1206_3216Metric | C72, C73, C74 |
| 3 | 250mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2, F3 |
| 3 | DRV8300DI | Active:TSOP65P640X110-20 | U8, U9, U11 |
| 3 | NXU0104PW | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U13, U14, U15 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R76 |
| 2 | 10K | Passive:RESC3216X70 | R71, R87 |
| 2 | 4.7K | Passive:RESC1608X55 | R75, R89 |
| 2 | LM324 | Active:SOP127P620X175-14 | U2, U5 |
| 2 | PMEG10020AELR | Active:SOD3716X117 | D1, D8 |
| 2 | R-78HB12-0.5 | Active:DCDC_3PIN_GENERIC_SHIFTED | U6, U7 |
| 1 | 1000uF | Passive:CAPAE500P1000X1500 | C5 |
| 1 | 173010542 | Active:DCDC_3PIN_GENERIC | U10 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric | R77 |
| 1 | 22K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 470K | Passive:RESC1608X55 | R88 |
| 1 | AUX | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J14 |
| 1 | FLAG | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | MMBTA42 | Package_TO_SOT_SMD:SOT-23 | Q10 |
| 1 | MMBTA92 | Package_TO_SOT_SMD:SOT-23 | Q11 |
| 1 | PE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | PITCH | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | POWER | Connector_TE-Connectivity:TE_826576-2_1x02_P3.96mm_Vertical | J2 |
| 1 | PR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | PTEST | Connector_TE-Connectivity:TE_826576-5_1x05_P3.96mm_Vertical | J9 |
| 1 | RE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | ROLL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | RR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | SYNC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Teensy4_1 | Package_DIP:DIP-48_W15.24mm_Socket | U1 |
| 1 | YAW | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | YE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | YR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
Questions
How big is the SynchroDriverD PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SynchroDriverD use?
252 parts, built around the R-78HB12-0.5, DRV8300DIPW, LM324 and NXU0104PWJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SynchroDriverD KiCad files?
From the schlae/SynchroDriver repository on GitHub, at the commit this page was made from: the board is SynchroDriverD/SynchroDriverD.kicad_pcb and its schematic SynchroDriverAS/PhaseDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SynchroDriverD design in my own project?
Its repository states no licence, so its author keeps all rights: ask schlae before reusing the design.
More from schlae/SynchroDriver
2- 2 layers46 × 30 mm
SynchroDriverAS
schlae/SynchroDriver
Various boards for driving synchros and other 400Hz devices
42 parts1
Similar boards
- 2 layers215 × 70 mm
Control
ElTinmar/IR_LED
This is an open-source infra-red illumnination solution (LED panel and driver) for machine vision. An arduino nano every sits at the core of the driver board, and allows remote control from a PC through serial…
49 parts - 2 layers85 × 56.5 mm
- 2 layers137.2 × 30.5 mm
Panaplex
74hc595/Panaplex-Clock
Code/schematics for a clock using a Panaplex (planar gas discharge) display
30 parts12BSD-3-Clause - 2 layers148.8 × 54.6 mm
Bowen nixie device
nonik0/stemmett-nixie-device
The hardware is designed in KiCad and all design files are included in the hardware directory. The hardware consists of the design of the main board PCB and three different versions of the PL31 socket breakout boards.
121 parts4 - 2 layers213 × 54 mm
Nixie board
Hardware7253/OperationUrd
A nixie tube clock inspired by the divergence meter from Steins;Gate.
99 parts1MIT - 4 layers86 × 47 mm
- 2 layers50.2 × 19.4 mm
- 4 layers90 × 95 mm
Bldc48
kobertkirk/bldc
A KiCad hardware design plus STM32 firmware for a hall-sensored e-bike or scooter hub motor:
133 parts