2 layers97.5 × 84.4 mm
2 layers85.5 × 84.5 mm
LEDControllerBrain
schiltz3/LEDController- Size
- 85.5 × 84.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 58
- Pads
- 153
- Tracks, vias
- 195, 8
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Dec 2024
- Updated
- 24 Apr 2025
Overview
LEDControllerBrain is an open-source printed circuit board by schiltz3, from the schiltz3/LEDController repository on GitHub. It is a 2-layer board of 85.5 × 84.5 mm with 28 parts on 58 nets, routed with 195 tracks and 8 vias.
It is built around the NODEMCU-32SLUA, DS18B20U and TB001-500-04BE. Its parts include 11 resistors, 6 connectors and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
3
NODEMCU-32SLUA
-- WiFi Modules ROHSAi-ThinkerWiFi Modules
DS18B20U
MSOP-8-55℃~+125℃ 12bit 2.5V~5.5V 400ms 750nA Single-bus ±0.4℃ MSOP-8 Temperature Sensors ROHSUMWTemperature SensorsTB001-500-04BE
插件,P=5mm-40℃~+105℃ 1 12.5mm 12~22 1x4P 2.5 24A 250V 4 4P 5mm Blue M3 Through Hole Plugin,P=5mm Screw Terminal Blocks ROHSCUIScrew Terminal Blocks
README
README.mdPower Distribution Board Screenshots
Schematic:
LEDControllerPDB/Outputs/LED Power Distribution Board sch.pdf
Front:
Back:
All:
Controll Board
Schematic:
LEDControllerBrain/Outputs/LED Control Board sch.pdf
Front:
Back:
All:
Assemmbly
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R8, R9, R10, R11 |
| 3 | TB001-500-04BE | LEDController:TB00150004BE | J2, J3, J4 |
| 2 | Conn_01x19_Pin | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J5, J6 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 647676-3 | LEDController:TE_647676-3 | J7 |
| 1 | 74LVC4245APW,118 | LEDController:SOP65P640X110-24N | IC1 |
| 1 | DS18B20U | Package_SO:MSOP-8_3x3mm_P0.65mm | U2 |
| 1 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | M2.5 / #6 |
| 1 | NODEMCU-32S | LEDController:MODULE_NODEMCU-32S | U1 |
The 21 most common of 28 parts.
Questions
How big is the LEDControllerBrain PCB?
It measures 85.5 × 84.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEDControllerBrain use?
28 parts, built around the NODEMCU-32SLUA, DS18B20U and TB001-500-04BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDControllerBrain KiCad files?
From the schiltz3/LEDController repository on GitHub, at the commit this page was made from: the board is LEDControllerBrain/LEDControllerBrain.kicad_pcb and its schematic LEDControllerBrain/LEDControllerBrain.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDControllerBrain design in my own project?
Its repository states no licence, so its author keeps all rights: ask schiltz3 before reusing the design.
More from schiltz3/LEDController
2- 2 layers100 × 76.3 mm
Similar boards
- 2 layers82.3 × 75.7 mm
- 2 layers68 × 114.5 mm
WatchdogSquare
patrick-th/sump-pump-monitor
PCB to monitor battery SOC and flow rate of a sump pump
44 parts - 4 layers72.6 × 170 mm
OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 2 layers75 × 40 mm
Clockcore
ansemjo/chronovfd
hardware project for a clock around a russian ivl2-5/7 vfd and an esp32-wroom module
61 parts13CERN-OHL-P-2.0 - 2 layers65 × 56 mm
RPi HAT RGBW LED Controller
mikelawrence/RPi-HAT-RGBW-LED-Controller
This is a Raspberry Pi B+ HAT that supports four high power LEDs. Main application is an RGB Floodlight.
60 parts9MIT - 2 layers66 × 51.5 mm
WiFi Gate Controller
mikelawrence/WiFi-Gate-Controller
WiFi enabled Gate Controller Addon to US Automatic Gate Opener
91 parts8MIT - 4 layers156.5 × 85.4 mm
P2 Kevinbot Board
meowmeowahr/KevinbotV3-KiCAD
Kevinbot Core - Parallax Propeller 2 Robot Controller
166 parts7CERN-OHL-S-2.0 - 2 layers127 × 91.5 mm
Accumulator Board
formulaslug/fs-3-schematics
Electrical Design Repository for fs-3 schematics and PCBs
110 parts5