2 layers97.5 × 84.4 mm
2 layers100 × 76.3 mm
LEDController
schiltz3/LEDController- Size
- 100 × 76.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 22
- Pads
- 90
- Tracks, vias
- 89, 10
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Dec 2024
- Updated
- 24 Apr 2025
Overview
LEDController is an open-source printed circuit board by schiltz3, from the schiltz3/LEDController repository on GitHub. It is a 2-layer board of 100 × 76.3 mm with 29 parts on 22 nets, routed with 89 tracks and 10 vias.
It is built around the MC34063ABD-TR, TB002-500-04BE and DMP3099L, with the J115F11CH5VDCS61.5U, MMBT2222A and SDR1105-201KL among its other parts. Its parts include 12 connectors, 4 capacitors, 4 resistors, 2 transistors and 1 diode.
Main components
8
MC34063ABD-TR
SOIC-8-40℃~+85℃@(TA) 1 1.5A 24kHz~42kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in No SOIC-8 DC-DC Converters ROHSSTMicroelectronicsDC-DC ConvertersTB002-500-04BE
插件插件 Screw Terminal Blocks ROHSCUIScrew Terminal Blocks
DMP3099L
SOT-23-55℃~+150℃ 1 P-Channel 1.08W 11nC@10V 2.1V 3.8A 30V 41pF 563pF 99mΩ@4.5V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsJ115F11CH5VDCS61.5U
插件Power RelaysCIT Relay and SwitchMMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
SDR1105-201KL
SMD,11.1x10mm1.8A 1A 200uH 650mΩ ±10% SMD,11.1x10mm Power Inductors ROHSBournsPower Inductors
SMD110PL-TP
SOD-123FL-55℃~+150℃ 1 Independent 100V 10uA@100V 1A 30A 850mV@1A SOD-123FL Schottky Diodes ROHSMicro Commercial ComponentsSchottky DiodesUVR1E102MPD
插件,D10xL20mmAluminum Electrolytic Capacitors - LeadedNichicon
README
README.mdPower Distribution Board Screenshots
Schematic:
LEDControllerPDB/Outputs/LED Power Distribution Board sch.pdf
Front:
Back:
All:
Controll Board
Schematic:
LEDControllerBrain/Outputs/LED Control Board sch.pdf
Front:
Back:
All:
Assemmbly
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 3557-2 | LEDController:3557-2 | J1, J2, J3, J4, J5, J6, J10 |
| 3 | TB002-500-04BE | LEDController:CONN4_TB002-500_787x299_CUD | J11, J12, J17 |
| 1 | .33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Rsc1 |
| 1 | 0389690002 | LEDController:0389690002 | J7 |
| 1 | 1.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 3.6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 470uF | LEDController:CAPPRD500W60D1000H1350 | C1 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J9 |
| 1 | DMP3099L | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | D_Zener | Diode_SMD:D_SOD-123 | D1 |
| 1 | J115F11CH5VDCS61.5U | LEDController:J115F11CH5VDCS615U | K1 |
| 1 | MC34063ABD-TR | LEDController:SO-8_STM | CR1 |
| 1 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | S1G-E3/61T | LEDController:DIODE_DO214AC | CR3 |
| 1 | SDR1105-201KL | LEDController:IND_BOURNS_SDR1105 | L1 |
| 1 | SMD110PL-TP | LEDController:SOD-123FL_MCC | CR2 |
| 1 | UVR1E102MPD | LEDController:CAPPRD500W60D1025H2200 | C4 |
Questions
How big is the LEDController PCB?
It measures 100 × 76.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEDController use?
29 parts, built around the MC34063ABD-TR, TB002-500-04BE, DMP3099L and J115F11CH5VDCS61.5U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDController KiCad files?
From the schiltz3/LEDController repository on GitHub, at the commit this page was made from: the board is LEDControllerPDB/LEDController-backups/LEDController-2025-04-08_120507/LEDController.kicad_pcb and its schematic LEDControllerBrain/LEDControllerBrain.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDController design in my own project?
Its repository states no licence, so its author keeps all rights: ask schiltz3 before reusing the design.
More from schiltz3/LEDController
2- 2 layers85.5 × 84.5 mm
Similar boards
- 4 layers150 × 110 mm
System Management Board
precision-sustainable-ag/PlantMap3D-Hardware
The system management board handles all power distribution in the multi-camera system and a few other auxiliary functions. The PCB is designed using KiCad.
130 parts2 - 4 layers127 × 76.2 mm
Payload pcb
austindriggs/urc-payload-pcb
All-purpose control and interface board designed to manage mission-critical sensors and electronics for University Rover Challenge at WVU.
114 partsMIT - 2 layers115.7 × 107.6 mm
- 4 layers154 × 154 mm
DC Controller STM32
andymartell/Prius-STM32-DC-Motor-Contoller
STM32 based DC Motor Controller using Prius Gen 3 hardware
293 parts - 2 layers121.5 × 22 mm
- 2 layers
- 2 layers134 × 88 mm
Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
103 parts978 - 2 layers65 × 30 mm
