
Engine
schilkp/Fets_and_Crosses
An implementation of the classic Tic-Tac-Toe / Knots and Crosses game built with 2458 transistors.

An implementation of the classic Tic-Tac-Toe / Knots and Crosses game built with 2458 transistors.
FetsAndCrosses is an open-source printed circuit board by schilkp, from the schilkp/Fets_and_Crosses repository on GitHub, published under the MIT licence. It is a 2-layer board of 149.9 × 266.7 mm with 1,638 parts on 836 nets, routed with 25,461 tracks and 4,521 vias.
It is built around the L7805 and BSS84. Its parts include 1,390 transistors, 104 resistors, 92 diodes, 25 capacitors and 12 switches.
An implementation of the classic Tic-Tac-Toe / Knots and Crosses game built entirely from 2458 discrete transistors.
Why? Because.



See Github releases for all production files, schematics, etc...
Although the schematic is included in PDF form, it is recommended to view the schematic in KiCad directly.
All logic implemented in standard CMOS logic using discrete transistors.
The engine opponent is also implemented in logic on a seperate PCB, but can be substituted with a ROM IC on the main IC.
JP1 has to be added when using the ROM IC, and removed when using the engine PCB.
Logisim:
Logic Simulation.
Download LogiSim at cburch.com.
Scripts:
Various python scripts to test different engine designs and generate ROM contents.
ROM:
Generated ROM files.
ECAD:
All KiCad projects and production files.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 707 | 2N7002 | LogicQ:SOT-23-N | Q101, Q102, Q1003, Q1004, Q1005, Q1009, Q1010, Q1011, Q1014, Q1015, Q1018, Q1020, Q1022, Q1024, Q1026, Q1029 +691 |
| 683 | BSS84 | LogicQ:SOT-23-P | Q1, Q10, Q100, Q1000, Q1001, Q1002, Q1006, Q1007, Q1008, Q1012, Q1013, Q1016, Q1017, Q1019, Q1021, Q1023 +667 |
| 52 | 1K | LogicQ:R_0603_1608Metric_NOLBL | R1, R3, R10, R12, R14, R16, R18, R19, R21, R23, R25, R27, R28, R103, R104, R106 +36 |
| 52 | RED | LogicQ:D_0805_2012Metric_NOLBL | D1, D3, D10, D12, D14, D16, D18, D19, D21, D23, D25, D27, D28, D30, D32, D34 +36 |
| 42 | 20K | LogicQ:R_0603_1608Metric_NOLBL | R2, R11, R13, R15, R17, R20, R22, R24, R26, R29, R31, R33, R102, R105, R107, R108 +26 |
| 40 | GREEN | LogicQ:D_0805_2012Metric_NOLBL | D2, D4, D11, D13, D15, D17, D20, D22, D24, D26, D29, D31, D33, D35, D38, D40 +24 |
| 23 | 0u1 | LogicQ:C_0603_1608Metric_NOLBL | C1, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C24, C26 +7 |
| 10 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW12 |
| 9 | 10K | Resistor_SMD:R_0603_1608Metric | R82, R83, R84, R85, R86, R87, R88, R89, R90 |
| 3 | ToolingHole | jlcpcb_tooling_hole:jlcpcb_tooling_hole | H3, H4, H5 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2 |
| 2 | SW_DPDT_x2 | Button_Switch_THT:SW_E-Switch_EG1271_DPDT | SW10, SW11 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10u | Capacitor_SMD:CP_Elec_6.3x7.7 | C3 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R97 |
| 1 | 9Vdc | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | BarrelPolarity_CenterNeg | BarrelPolarity:BarrelPolarity_3mm_CenterNeg | G1 |
| 1 | Jumper_NC_Small | Resistor_SMD:R_0603_1608Metric | JP1 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | LM555xM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Move | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Horizontal | J9 |
| 1 | P1 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Horizontal | J4 |
| 1 | P2 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Horizontal | J5 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Horizontal | J3 |
| 1 | SST39SF020 | PLCC-32_11.4x14.0mm_P1.27mm_SMD-Socket:PLCC-32_11.4x14.0mm_P1.27mm_SMD-Socket | U2 |

schilkp/Fets_and_Crosses
An implementation of the classic Tic-Tac-Toe / Knots and Crosses game built with 2458 transistors.

schilkp/Fets_and_Crosses
An implementation of the classic Tic-Tac-Toe / Knots and Crosses game built with 2458 transistors.

EliMattingly22/Inductor_Saturation_Tester
A circuit to check the saturation level of different inductor cores


UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported



giant-axon/lu.i-neuron-pcb
Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…

antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

7west/PicoTop
A very basic computer & OS based on the RP2350 microcontroller
It measures 149.9 × 266.7 mm and has 2 copper layers, 1.6 mm thick.
1,638 parts, built around the L7805 and BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the schilkp/Fets_and_Crosses repository on GitHub, at the commit this page was made from: the board is ECAD/Fets_and_Crosses/KiCad/FetsAndCrosses.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).