2 layers167.6 × 127 mm
2 layers80 × 87 mm
- Size
- 80 × 87 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 47
- Pads
- 175
- Tracks, vias
- 263, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 May 2024
- Updated
- 29 Aug 2024
Overview
Power is an open-source printed circuit board by Tinashe-Timba, from the Tinashe-Timba/EEE4113F_GROUP_22 repository on GitHub. It is a 2-layer board of 80 × 87 mm with 71 parts on 47 nets, routed with 263 tracks and 15 vias.
It is built around the LM358, CN3791 and L7805, with the LM555CN, SS34 and BSS84 among its other parts. Its parts include 28 resistors, 15 diodes, 13 capacitors, 4 ICs and 4 transistors.
Main components
9
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
CN3791
SSOP-10-150mil-40℃~+85℃ 1 15uA 4.2V 4.5V~28V 4A Charging IC Lithium Battery Not supported 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定、过压保护 SSOP-10-150mil Battery Management ROHSShangHai Consonance ElecBattery Management
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM555CN
PDIP-80℃~+70℃ 10mA 4.5V~16V PDIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsCEM4435A
SOP-8MOSFETsTECH PUBLIC
IRFZ44NPBF
TO-220AB-55℃~+175℃ 1 N-channel 1.47nF 17.5mΩ@10V 49A 4V 55V 63nC@10V 88pF 94W TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETs
XT60PW-M
-Horizontal plug Yellow - Power connector / plug connector ROHSChangzhou Amass ElecPlug
README
README.mdEEE4113F Group 22
Wildlife monitoring using camera traps.
Cam
Software for camera system
GUI
GUI software Open and run TMBTIN004_GUI.
Power
Power supply kicad files
Housing
Mechanical Housing Solidworks Design & 3D Printing g-code
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0R | Resistor_SMD:R_0805_2012Metric | R4, R8, R9, R22, R27 |
| 5 | 1K | Resistor_SMD:R_0805_2012Metric | R2, R3, R10, R20, R28 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R15, R16, R18, R19 |
| 3 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D6, D7, D8 |
| 3 | SS34 | Diode_SMD:D_SMA | D1, D2, D13 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C6, C10 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 10u | UUD1H100MCL1GS:CAPAE660X610N | C4, C5 |
| 2 | 1N5822 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D14, D15 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R13, R17 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric | R25, R26 |
| 2 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 47 | Resistor_SMD:R_0805_2012Metric | R23, R24 |
| 2 | 82uH | Resistor_THT:R_Axial_Power_L20.0mm_W6.4mm_P5.08mm_Vertical | L1, L2 |
| 1 | .1uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | .47uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 0.05 | Resistor_SMD:R_1210_3225Metric | R1 |
| 1 | 100% (yellow) | LED_SMD:LED_0603_1608Metric | D12 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 2.2K | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 200K | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 220n | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 25% (red) | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | 2N7002 | 2N7002:SOT95P240X111-3N | Q3 |
| 1 | 3.3K | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 4628 fuse | 4628:FUSE_4628 | F1 |
| 1 | 470n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 47K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 50% (red) | LED_SMD:LED_0603_1608Metric | D10 |
| 1 | 50K POT | 3362P-1-503LF:TRIM_3362P-1-503LF | VR1 |
| 1 | 5V | terminal_footprints:CONN_DG128_DEG | J3 |
| 1 | 75% (yellow) | LED_SMD:LED_0603_1608Metric | D11 |
| 1 | BSS84 | BSS84:SOT95P240X120-3N | Q2 |
| 1 | CEM4435A | this:SOIC127P600X175-8N | Q1 |
| 1 | CN3791 | THESE:SOP100P600X175-10N | IC1 |
| 1 | Charging (red) | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | Done Charging (yellow) | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | IRFZ44NPBF | IRFZ44NPBF:TO254P1016X419X2286-3 | Q4 |
| 1 | L7805 | L7805CV:TO255P1040X460X1968-3 | U1 |
| 1 | LED_Y | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | LM358 | LM358NG:DIP794W45P254L1016H508Q8 | U2 |
| 1 | LM555 | LM555CN:DIP254P762X533-8 | U3 |
| 1 | SOLAR | terminal_footprints:CONN_DG128_DEG | J1 |
| 1 | XT60PW-M | XT60PW-M:AMASS_XT60PW-M | J2 |
Similar boards
- 2 layers105.5 × 81.1 mm
Buck
almondsun/DynamicSystemsAndControl
Dynamic Systems and Control coursework: Buck converter modeling, reports, KiCad PCB and STM32 firmware
77 parts - 2 layers
PCB Layout
chgopireddy/Full-Bridge-Class-D-Audio-Amplifier
LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control
63 parts6 - 4 layers133.4 × 151.8 mm
Clock module 6502
Grudz/6502_Computer
This repository stores everything for my 6502 project. This includes schematics, datasheets, C scripts, and assembly programs
69 parts1 - 2 layers87 × 63.5 mm
Sr Design
EngineerGuySam/Cat-Turret
A Raspberry Pi 4–powered pan-and-tilt water gun that uses a camera and YOLO machine learning to detect cats on counters.
46 parts - 2 layers41.9 × 29 mm
- 2 layers94.4 × 90 mm
Saturation Tester
EliMattingly22/Inductor_Saturation_Tester
A circuit to check the saturation level of different inductor cores
78 parts2MIT - 2 layers86 × 60 mm
Pmbh
3351666087/solar-vest
Self-powered solar-harvesting wearable ECG vest: PCBs, 3D-printed enclosures, vest patterns, simulation and an interactive 3D explorer
100 parts
Questions
How big is the Power PCB?
It measures 80 × 87 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power use?
71 parts, built around the LM358, CN3791, L7805 and LM555CN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power KiCad files?
From the Tinashe-Timba/EEE4113F_GROUP_22 repository on GitHub, at the commit this page was made from: the board is power/power.kicad_pcb and its schematic power/power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tinashe-Timba before reusing the design.