
C64
schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.
PicoROM is an open-source printed circuit board by schenkmi, from the schenkmi/electronic-retro-computing-projects repository on GitHub. It is a 4-layer board of 19.6 × 42.2 mm with 49 parts on 97 nets, routed with 808 tracks and 126 vias.
It is built around the RP2040, SN74LVC827APWR and 74AHCT1G126GW, with the 74VHCT245BQ, TCA5405RUGR and W25Q16JVSNIQ among its other parts. Its parts include 22 capacitors, 10 resistors, 8 ICs, 5 connectors and 3 diodes. It belongs with the RP2040 boards of this library.

In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements. Note: In this revision, the numbering of the LEDs has been accidentally reversed. This has been fixed later on the master branch.

The first revision required a much larger PCB but featured a full-size SD slot and experimental support for TAPuino functionality. The latter was never tested though and probably wouldn't work.
If you don't intend to use the TAPuino functionality (and there isn't any firmware support for this yet) you can omit R16-R21 and the optocoupler U3. Also, the board can be power either through the USB or the tape port connector so you don't necessarily need to fit both.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 |
| 6 | 1k | Capacitor_SMD:C_0402_1005Metric | R1, R2, R5, R8, R9, R10 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 27 | Capacitor_SMD:C_0402_1005Metric | R3, R4 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 5.1k | Capacitor_SMD:C_0402_1005Metric | R6, R7 |
| 2 | 74LVC827 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U5, U6 |
| 2 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J3, J4 |
| 1 | 445C25D12M00000 | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 74AHCT1G126 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U8 |
| 1 | 74VHCT245 | Package_DFN_QFN:DHVQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x3mm | U4 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | External Reset | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U3 |
| 1 | TCA5405RUGR | TCA5404:RUG8 | U7 |
| 1 | USB Boot | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7051x | J1 |
| 1 | W25Q16JVSNIQ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.




kaminaris/GigaESC-Power200V
Compact 50 × 20 mm non-isolated power-supply module for the modular GigaESC platform, intended for the 200 V version. Provides 12 V, 5 V and 3.3 V rails through a separate output connector.



matthiasnowak/jewelled
This is a panel meant for production of the Earrings, allowing for 2 Earrings per panel.

It measures 19.6 × 42.2 mm and has 4 copper layers, 1.95 mm thick.
49 parts, built around the RP2040, SN74LVC827APWR, 74AHCT1G126GW and 74VHCT245BQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the schenkmi/electronic-retro-computing-projects repository on GitHub, at the commit this page was made from: the board is PicoROM/hardware/PicoROM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask schenkmi before reusing the design.