

misc electronic projects
- Size
- 94 × 72.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 37
- Pads
- 838
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Oct 2020
- Updated
- 31 Oct 2026
Overview
Solder is an open-source printed circuit board by schenkmi, from the schenkmi/electronic-projects repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 94 × 72.4 mm with 67 parts on 37 nets.
It is built around the CS4344, LP3982ILD-1.8 and LP3982IMM-1.8, with the PCM1792ADB among its other parts. Its parts include 34 ICs and 25 resistors. It belongs with the audio and music boards of this library.
Main components
4CS4344
TSSOP-10- New Arrivals ROHSCirrus LogicUncategorisedLP3982ILD-1.8
WSON-8(2.5x3)-40℃~+85℃ 1 1.8V 220mV@(200mA) 270uA 300mA 6V Fixed Over Current Protection、Overheat protection、Reverse connection protection Positive WSON-8(2.5x3) Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLP3982IMM-1.8
VSSOP-8-0.65mm-40℃~+85℃ 1 1.8V 220mV@(300mA) 300mA 37uVrms 60dB@(1kHz) 6V 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive VSSOP-8-0.65mm Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPCM1792ADB
SSOP-28-25℃~+85℃ 2 24 3V~5.25V I2S SSOP-28 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose
README
README.mdelectronic-projects
misc electronic projects
History
2026.09.19
pre-amp-ECC86/kicad/psu-v6
Large PCB PSU for ECC86 with high side switch. Support LT3080 and LM317. Fix Drain/Source.
2026.09.02
pre-amp-ECC86/kicad/psu-v5
Large PCB PSU for ECC86 with high side switch. Support LT3080 and LM317
2026.08.26
pre-amp-ECC86/kicad/psu-v4
Large PCB PSU for ECC86 without relais. Support LT3080 and LM317
2026.08.23
input-sel-attenuator/software/v9
Power up timer to 64ms wait till voltage is stabilized
2026.08.10
pre-amp-ECC86/kicad/psu-v3
Large PCB PSU for ECC86
2026.08.01
pre-amp-ECC86/kicad/psu-v2
Shrinked and optimized PSU for ECC86
2026.07.22
pre-amp-ECC86/kicad/psu-v1
First version of PSU for ECC86
2026.07.12
pre-amp-ECC86/kicad/v1
First version of ECC86 based pre-amplifier
spdif-recv-ak4118-ak4137/software/spdif-recv-ak4118-ak4137-v4.X
Updated software for V4 PCB
2026.06.05
dac-pcm1702-v1/kicad-psu-v8/
DC/DC for +5V digital path
dac-pcm1702-v1/kicad-asrc-v14
PCB LED fix External LED support
spdif-recv-ak4118-ak4137/kicad/v4
External LED support Change one LDO to TLV1117-3.3 due to power dissipation
2026.05.28
dac-pcm1702-v1/kicad-asrc-v13
PCB re-design with fixed LED ordering
2026.05.27
pre-amp-26A7/ltspice/v2/
New CCS simulation with smaller FETs
2026.05.26
dac-pcm1702-v1/software/spdif-recv-asrc-4392-v12.X
New software for SPDIF ASRC receiver including UART and IR
2026.05.16
dac-pcm1702-v1/kicad-asrc-v12
PSU re-design, UART for debugging, I2C debugging, IR
spdif-recv-ak4118-ak4137/kicad/v3
Add IR support
2026.05.10
spdif-recv-cs8416-ak4137/kicad/v7
Improved power supply, I2S debug, Serial console
spdif-recv-ak4118-ak4137/kicad/v2
Small redesign
2026.04.25
spdif-recv-ak4118-ak4137/kicad/v1
Finalize and ordered
pre-amp-26A7/kicad/v2
Finalize and ordered
2026.03.29
pre-amp-26A7/kicad/v1
Finalize and ordered v1
2026.03.28
lv-psu-dcdc/kicad/fixed-v3
Better thermal management for DC/DC
lv-lownoise-psu/kicad/v7-dcdc-large-cap
Better thermal handling on DC/DC
input-sel-attenuator/kicad/v9-10k-47k
Changed footprint for L1 and C1
2026.03.11
lv-psu-dcdc/kicad/fixed-v2
Eval board with different inductors
hv-psu-discrete/kicad/maida-lt3080-v5
HV PSU with DC/DC for +5V output
2026.03.05
lv-lownoise-psu/kicad/v6-dcdc-large-cap
Finalize v6 with large reservoir cap
2026.02.25
hv-psu-discrete/kicad/maida-lt3080-v5-26A7GT
HV PSU for 26A7 pre-amp
2026.01.13
input-sel-attenuator/software/ir-debug-v3
Update MCC generated code
dac-pcm1792a/software/asrc-pcm1792a-v4.X
Update MCC generated code
dac-pcm1702-v1/software/v8
Update MCC generated code
spdif-recv-cs8416-ak4137/software/spdif-recv-cs8416-ak4137-v5.X
Update MCC generated code
input-sel-attenuator/software/v9
Update MCC generated code
rpi-hat-spdif/kicad/V9
RPI HAT SPDIF Output increase hole diameter to 3.2mm
rpi-hat-spdif/kicad/V9-min
RPI HAT SPDIF Output minized PCB increase hole diameter to 3.2mm
2026.01.01
adapter/spdif/kicad/v2
LVDS SPDIF XMIT with rotated connector
adapter/spdif/kicad/v2b
LVDS SPDIF XMIT with standard connector
rpi-hat-spdif/kicad/V7-min
RPI HAT SPDIF Output minized PCB
rpi-hat-spdif/kicad/V8
RPI HAT SPDIF Output new PCB
2025.12.20
adapter/spdif/kicad/v1
Finalize v1 LVDS SPDIF XMIT
rpi-hat-spdif/kicad/v6
RPI HAT SPDIF Output
rpi-hat-spdif/kicad/v6-min
RPI HAT SPDIF Output minimized
2025.12.08
pre-amp-ECC88/kicad/v9
Finalize and ordered v9
2025.09.29
retro/c64-user-port-led
Finalize v1 of C64 user port LED
2025.09.28
dac-pcm1704/kicad/dac-df1706-pcm1704-v2
Finalize and ordered v2
2025.09.21
dac-pcm1704/kicad/dac-pcm1704-v5
Finalize and ordered v5
dac-pcm1702-v1/kicad-i2s-nos-v7
Finalize and ordered v7
dac-pcm1792a/kicad/v6/
Finalize and ordered v6
2025.09.13
input-sel-attenuator/software/ir-debug-v2
input-sel-attenuator/software/v8
V2.5 2025.09.12 Shiny new push button and saving handling Use volume when doing channel switch.
2025.09.07
lv-lownoise-psu/kicad/v5-dcdc
Finalize and ordered v5
lv-lownoise-psu/kicad/v5-dcdc-large-cap
Finalize and ordered v5 with large reservoir cap
2025.08.25
lt1115-phono-mm-mc/kicad/v6
Finalize and ordered v6
2025.08.23
dac-pcm1702-v1/kicad-psu-v7
Finalize and ordered v7
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | Resistor_SMD:R_0402_1005Metric | R21, R22, R23, R24, R25 |
| 5 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R8, R10, R12, R14 |
| 5 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 5 | R | Resistor_SMD:R_0603_1608Metric | R7, R9, R11, R13, R15 |
| 5 | R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16, R17, R18, R19, R20 |
| 4 | CS4344 | Package_SO:TSSOP-10_3x3mm_P0.5mm | IC1, IC2, IC3, IC4 |
| 4 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U2, U7, U8, U9 |
| 4 | LP3982ILD-1.8 | Package_SON:WSON-8-1EP_3x2.5mm_P0.5mm_EP1.2x1.5mm_PullBack_ThermalVias | U25, U26, U29, U30 |
| 4 | LP3982IMM-1.8 | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U23, U24, U27, U28 |
| 4 | LT3045xDD | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm | U13, U18, U19, U20 |
| 4 | LT3045xMSE | Package_SO:MSOP-12-1EP_3x4mm_P0.65mm_EP1.65x2.85mm | U14, U15, U16, U17 |
| 4 | OPA859xDSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U1, U10, U11, U12 |
| 4 | SRC4392 | Package_QFP:TQFP-48_7x7mm_P0.5mm | U3, U4, U5, U6 |
| 2 | PCM1792A | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U21, U22 |
The 59 most common of 67 parts.
More from schenkmi/electronic-projects
12- 2 layers389 × 136.2 mm

- 2 layers159.9 × 99.9 mm

Hv power supply t reg v2
schenkmi/electronic-projects
misc electronic projects
107 parts6CERN-OHL-W-2.0 - 2 layers159.9 × 99.9 mm

- 2 layers159.9 × 99.9 mm

- 2 layers159.9 × 99.9 mm

- 2 layers159.9 × 99.9 mm

- 4 layers97.8 × 69.9 mm

- 2 layers159.5 × 99.6 mm

- 2 layers159.7 × 99.6 mm

- 2 layers159.5 × 99.6 mm

- 2 layers159.5 × 99.6 mm

- 2 layers159.7 × 99.6 mm

Similar boards
- 4 layers94 × 120 mm

- 2 layers65 × 50 mm

- 4 layers85 × 55 mm

Dac
duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction
76 parts1 - 2 layers101.5 × 83 mm

- 4 layers101.8 × 83 mm

- 2 layers75.5 × 62.5 mm

- 4 layers250 × 100 mm

- 4 layers62.1 × 67.3 mm

Proto pico
amundgr/proto_pico
A mash of several different projects in one PCB in an attempt to kicak start all of them at once. Why fail and give up on one project when you can do it on several at once!
112 parts
Questions
How big is the Solder PCB?
It measures 94 × 72.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solder use?
67 parts, built around the CS4344, LP3982ILD-1.8, LP3982IMM-1.8 and PCM1792ADB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solder KiCad files?
From the schenkmi/electronic-projects repository on GitHub, at the commit this page was made from: the board is test-pcbs/solder-v1/solder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solder design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).