Skip to the content
2 layersSonnenuhr pcb, the printed circuit board in 3D

UV radioation meter with a hardware analog clock display

Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
42
Pads
67
Tracks, vias
77, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
5 May 2019
Updated
29 May 2019

Overview

Sonnenuhr pcb is an open-source printed circuit board by Schaffenburg, from the Schaffenburg/sonnenuhr repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 8 parts on 42 nets, routed with 77 tracks and 0 vias.

It is built around the ULN2803A. Its parts include 3 connectors, 2 capacitors, 1 IC and 1 diode. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

sonnenuhr

UV radioation meter with a hardware analog clock display

Parts

8
QtyValueFootprintReferences
1100nFCapacitor_SMD:C_0805_2012MetricC1
1100uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC2
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1Conn_01x05_MaleConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_HorizontalJ1
1Conn_01x05_MaleConnector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_VerticalJ2
1D_ZenerDiode_THT:D_T-1_P10.16mm_HorizontalD1
1ULN2803APackage_DIP:DIP-18_W7.62mm_Socket_LongPadsU1

Similar boards

  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers128.6 × 81 mmAfterglow, the printed circuit board in 3D

    Afterglow

    bitfieldlabs/afterglow

    Pinball retro afterglow

    203 parts32
  • 4 layers132 × 84.5 mmHamodule, the printed circuit board in 3D

    Hamodule

    crgarcia12/electronics-homeassistant-lightscontroll

    A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.

    207 parts28
  • 2 layers73 × 113 mmFT817 buddy v4, the printed circuit board in 3D

    FT817 buddy v4

    g7uhn/ft817_buddy

    A companion display & controls for the FT-817

    76 parts28CC-BY-SA-4.0
  • 2 layers28 × 36 mmBlisplay driver, the printed circuit board in 3D

    Blisplay driver

    hzeller/blisplay

    A tactile display for the blind.

    17 parts21
  • 4 layers159 × 130 mmRC11, the printed circuit board in 3D

    RC11

    AgOpenGPS-Official/Rate_Control

    106 parts20GPL-3.0

Questions

What parts does the Sonnenuhr pcb use?

8 parts, built around the ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sonnenuhr pcb KiCad files?

From the Schaffenburg/sonnenuhr repository on GitHub, at the commit this page was made from: the board is sonnenuhr-pcb/sonnenuhr-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sonnenuhr pcb design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).