2 layers71.5 × 68.5 mm
ArduLogger
sbeddes/Agduino
A compact root module system to use with an Arduino Nano, Screw Terminal, RTC 3231, and SD Card module for simple datalogging.
13 parts1
2 layers90.5 × 99 mm
ArduLogger
sbeddes/Agduino1A compact root module system to use with an Arduino Nano, Screw Terminal, RTC 3231, and SD Card module for simple datalogging.
- Size
- 90.5 × 99 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 45
- Pads
- 129
- Tracks, vias
- 419, 62
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 May 2025
- Updated
- 31 May 2026
Overview
ArduLogger is an open-source printed circuit board by sbeddes, from the sbeddes/Agduino repository on GitHub. It is a 2-layer board of 90.5 × 99 mm with 21 parts on 45 nets, routed with 419 tracks and 62 vias.
It is built around the DS3231MZ/V+ and NMUX1308BQX. Its parts include 8 capacitors, 6 resistors, 3 ICs and 3 connectors.
Main components
2
DS3231MZ/V+
SOIC-8-40℃~+85℃ 2.3V~5.5V Built-in I2C Temperature compensation、Backup power management and battery charging、Alarm function、Locking and tamper-proof、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
NMUX1308BQX
DHVQFN-16(2.5x3.5)UncategorisedNexperia
README
README.mdAgduino
A compact root module system to use with an Arduino Nano, Screw Terminal, RTC 3231, and SD Card module for simple datalogging.
Primarily for use with the Arduino Nano Family.
The Logger library provides easy device fusion for datalogging using the RTC and SD libraries. While this library can be used for any Arduino IDE cabale board, it was designed to be used with the Arduino Nano family.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6 |
| 2 | Conn_01x15_Socket | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_15-G-5,08_1x15_P5.08mm_Vertical | J2, J3 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A2 |
| 1 | DS3231MZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | J1 |
| 1 | NMUX1308BQ | Package_DFN_QFN:DHVQFN-16-1EP_2.5x3.5mm_P0.5mm_EP1x2mm | U2 |
Questions
How big is the ArduLogger PCB?
It measures 90.5 × 99 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArduLogger use?
21 parts, built around the DS3231MZ/V+ and NMUX1308BQX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArduLogger KiCad files?
From the sbeddes/Agduino repository on GitHub, at the commit this page was made from: the board is CAD/ArduLogger_outdated/ArduLogger.kicad_pcb and its schematic CAD/ArduLogger_outdated/ArduLogger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArduLogger design in my own project?
Its repository states no licence, so its author keeps all rights: ask sbeddes before reusing the design.
More from sbeddes/Agduino
1Similar boards
- 4 layers71.1 × 149.9 mm
- 4 layers91.5 × 32.7 mm
Pcb challenge final
davidlesman/PCB-Challenge-2026
PCB Challenge sponsored by PCBWay and Jane Street
154 parts - 4 layers45 × 45 mm
Pcb challenge final
manyetox/PCB-Challenge-4-word-4-bit-asynchronous-FIFO
These were checked with KiCad's DRC and an independent script: - No unconnected items, no clearance, short or crossing errors. - No vias inside any IC courtyard, top or bottom.
164 partsApache-2.0 - 4 layers45 × 32 mm
Templog mainboard
Michael-Manning/E-Paper-Climate-Logger
Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.
68 parts457MIT - 4 layers45 × 41 mm
Osw
Open-Smartwatch/open-smartwatch-gps
Hardware design files for the GPS version of the open-smartwatch
70 parts243GPL-3.0 - 2 layers149.9 × 99.5 mm
- 2 layers55 × 100 mm
- 2 layers43.6 × 49.8 mm
