2 layers90.5 × 99 mm
ArduLogger
sbeddes/Agduino
A compact root module system to use with an Arduino Nano, Screw Terminal, RTC 3231, and SD Card module for simple datalogging.
21 parts1
2 layers71.5 × 68.5 mm
ArduLogger
sbeddes/Agduino1A compact root module system to use with an Arduino Nano, Screw Terminal, RTC 3231, and SD Card module for simple datalogging.
- Size
- 71.5 × 68.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 44
- Pads
- 125
- Tracks, vias
- 357, 43
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 May 2025
- Updated
- 31 May 2026
Overview
ArduLogger is an open-source printed circuit board by sbeddes, from the sbeddes/Agduino repository on GitHub. It is a 2-layer board of 71.5 × 68.5 mm with 13 parts on 44 nets, routed with 357 tracks and 43 vias.
It is built around the DS3231MZ+ and NMUX1308BQX. Its parts include 5 resistors, 3 capacitors, 2 ICs and 2 connectors.
Main components
2README
README.mdAgduino
A compact root module system to use with an Arduino Nano, Screw Terminal, RTC 3231, and SD Card module for simple datalogging.
Primarily for use with the Arduino Nano Family.
The Logger library provides easy device fusion for datalogging using the RTC and SD libraries. While this library can be used for any Arduino IDE cabale board, it was designed to be used with the Arduino Nano family.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2, R4 |
| 2 | 0.1uF | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C1, C2 |
| 2 | Conn_01x15_Socket | Connector_JST:JST_EH_B15B-EH-A_1x15_P2.50mm_Vertical | J2, J3 |
| 1 | 100 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R5 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R3 |
| 1 | 10nF | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C3 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A2 |
| 1 | DS3231M | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U1 |
| 1 | NMUX1308BQ | Package_DFN_QFN:DHVQFN-16-1EP_2.5x3.5mm_P0.5mm_EP1x2mm | U2 |
Questions
How big is the ArduLogger PCB?
It measures 71.5 × 68.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArduLogger use?
13 parts, built around the DS3231MZ+ and NMUX1308BQX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArduLogger KiCad files?
From the sbeddes/Agduino repository on GitHub, at the commit this page was made from: the board is CAD/ArduLogger_outdated/Ardulogger_v1/ArduLogger.kicad_pcb and its schematic CAD/ArduLogger_outdated/ArduLogger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArduLogger design in my own project?
Its repository states no licence, so its author keeps all rights: ask sbeddes before reusing the design.
More from sbeddes/Agduino
1Similar boards
- 4 layers71.1 × 149.9 mm
- 4 layers91.5 × 32.7 mm
Pcb challenge final
davidlesman/PCB-Challenge-2026
PCB Challenge sponsored by PCBWay and Jane Street
154 parts - 4 layers45 × 45 mm
Pcb challenge final
manyetox/PCB-Challenge-4-word-4-bit-asynchronous-FIFO
These were checked with KiCad's DRC and an independent script: - No unconnected items, no clearance, short or crossing errors. - No vias inside any IC courtyard, top or bottom.
164 partsApache-2.0 - 2 layers245.2 × 100 mm
V5 main
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
160 parts156 - 2 layers82 × 42 mm
Open authenticator
Open-Authenticator/hardware-design
Hardware design files for open authenticator
86 parts42MIT - 4 layers100 × 75 mm
OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT - 2 layers117.8 × 168 mm
Picon one v1.0a
fm4dd/picon-one-hw
KiCad PCB, gerber, and CAD files for the PiCon-One controller.
73 parts23 - 2 layers96 × 26 mm
