

UAV2021 ver3 panelizing
2024年のドローン制作に関する設計資料
- Size
- 47.9 × 76 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 73
- Pads
- 191
- Tracks, vias
- 329, 75
- Pours
- 41
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Jul 2024
- Updated
- 15 Feb 2025
Overview
UAV2021 ver3 panelizing is an open-source printed circuit board by sbasami, from the sbasami/UAV2024 repository on GitHub. It is a 2-layer board of 47.9 × 76 mm with 28 parts on 73 nets, routed with 329 tracks and 75 vias.
It is built around the BMI088, MIC5219-3.3YM5 and 2N7002K. Its parts include 19 connectors, 4 capacitors, 2 resistors, 2 ICs and 1 transistor.
Main components
3BMI088
LGA-16(3x4.5)-40℃~+85℃ Accelerometer Gyroscope LGA-16(3x4.5) Accelerometers ROHSBosch SensortecAccelerometersMIC5219-3.3YM5
SOT23-53.3V 500mA Peak Output Low Drop-Out (LDO) RegulatorMicrochip TechnologyUncategorised2N7002K
SOT-23-55℃~+150℃ 1 N-channel 1.2Ω@10V、1.4Ω@5V 1.6V 2.9pF 300pC@4.5V 30pF 380mA 4.2pF 540mW 60V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdUAV2024
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6, J7, J12, J13 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | Conn_01x01 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | J14, J15 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Right | J9, J10 |
| 2 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Left | J8, J11 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 2N7002K | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 3.3k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 470p | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | BMI088 | SamacSys_Parts:BMI088 | IC1 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J16 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Right | J17 |
| 1 | Conn_01x06 | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J1 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | Conn_01x24 | Connector_PinSocket_2.54mm:PinSocket_1x24_P2.54mm_Vertical_SMD_Pin1Left | J4 |
| 1 | Conn_01x24 | Connector_PinSocket_2.54mm:PinSocket_1x24_P2.54mm_Vertical_SMD_Pin1Right | J5 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
More from sbasami/UAV2024
1- 2 layers10.2 × 10.2 mm

Similar boards
- 4 layers40 × 55 mm

CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 4 layers44.4 × 57.2 mm

- 2 layers80 × 50 mm

Thermal Camera
Circuit-Digest/MLX90640-Thermal-Camera
An Open Source Thermal Imaging IR camera that you can build yourserlf
66 parts94 - 2 layers67.8 × 55 mm

- 2 layers166 × 105 mm

Pico synth sandbox
relic-se/PicoSynth_Sandbox-hardware
Raspberry Pi Pico digital synthesizer board with I2S stereo audio i/o, MEMS microphones, MIDI i/o, a capacitive keybed, 1602 display, 2 rotary encoders, and LiPo battery. Designed for use with CircuitPython and synthio.
184 parts26GPL-3.0 - 2 layers81 × 49 mm

MmStep
luni64/mmStep
Stepper driver board for the sparkfun MicroMod system. Compatible to DRV8825, A4988 etc.
39 parts14MIT - 2 layers49 × 75 mm

- 2 layers23 × 19 mm

Questions
How big is the UAV2021 ver3 panelizing PCB?
It measures 47.9 × 76 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UAV2021 ver3 panelizing use?
28 parts, built around the BMI088, MIC5219-3.3YM5 and 2N7002K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UAV2021 ver3 panelizing KiCad files?
From the sbasami/UAV2024 repository on GitHub, at the commit this page was made from: the board is 000_回路図データ/UAV2021_ver3_panelizing/UAV2021_ver3_panelizing.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UAV2021 ver3 panelizing design in my own project?
Its repository states no licence, so its author keeps all rights: ask sbasami before reusing the design.