

Esc v6
My custom ESC project
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 16
- Nets
- 34
- Pads
- 79
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Jan 2024
- Updated
- 4 Jan 2024
Overview
Esc v6 is an open-source printed circuit board by savob, from the savob/esc repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board with 16 parts on 34 nets.
It is built around the ATTINY1617-MN. Its parts include 5 capacitors, 1 resistor, 1 IC, 1 diode and 1 connector. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdesc
My custom ESC attempt
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5 |
| 1 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10k | Resistor_SMD:R_Cat16-4 | RN2 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 33k | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | 4n7 | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 56k2 | Resistor_SMD:R_Array_Convex_4x0603 | RN3 |
| 1 | ATtiny1617-M | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | STATUS | LED_SMD:LED_0805_2012Metric | D1 |
More from savob/esc
7- 2 layers65 × 35 mm

- 2 layers40 × 25 mm

- 2 layers40 × 25 mm

- 2 layers40 × 25 mm

- 2 layers40 × 25 mm

- 2 layers49 × 34 mm

- 2 layers12 × 13.5 mm

Similar boards
- 2 layers92.5 × 150.6 mm

- 4 layers79.7 × 139.5 mm

- 2 layers92.5 × 151 mm

- 2 layers85.5 × 54 mm

STTS
EthanKerman/STTS
A behbeh credit card sized synth for your wallet. The keys are a full octave ad you can go up and down 2 more. The noise from a piezo disc which is why theres a hole in the board.
43 parts - 2 layers

- 2 layers19.1 × 24.1 mm

Malenki nano2
MarkR42/malenki-esc
A small electronic speed controller for e.g. tiny fighting robots or other rc models
25 parts7 - 4 layers82 × 61 mm

- 4 layers68 × 40 mm

Questions
What parts does the Esc v6 use?
16 parts, built around the ATTINY1617-MN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esc v6 KiCad files?
From the savob/esc repository on GitHub, at the commit this page was made from: the board is hardware/esc_v6/esc_v6.kicad_pcb and its schematic hardware/driver_ic_adapter/driver_ic_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esc v6 design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).