

Begin
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 19
- Pads
- 78
- Tracks, vias
- 139, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Nov 2016
- Updated
- 23 Jun 2017
Overview
Begin is an open-source printed circuit board by sangseu, from the sangseu/kicad repository on GitHub. It is a 2-layer board with 35 parts on 19 nets, routed with 139 tracks and 0 vias.
It is built around the LM324. Its parts include 16 resistors, 10 connectors, 7 capacitors and 1 IC.
Main components
1Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.5R | Resistors_SMD:R_2512_HandSoldering | R5, R6, R7, R8, R9 |
| 5 | 100nF | Capacitors_THT:C_Disc_D3_P2.5 | C2, C3, C4, C6, C7 |
| 4 | 10k | Resistors_THT:Resistor_Horizontal_RM7mm | R1, R2, R11, R15 |
| 2 | 1k | Resistors_THT:Resistor_Horizontal_RM7mm | R4, R16 |
| 2 | 330R | Resistors_THT:Resistor_Horizontal_RM7mm | R10, R13 |
| 1 | 100nF | Capacitors_THT:C_Rect_L7_W2.5_P5 | C1 |
| 1 | 180k | Resistors_THT:Resistor_Horizontal_RM7mm | R12 |
| 1 | 20k | Connectors:PINHEAD1-3 | RV1 |
| 1 | 22nF | Capacitors_THT:C_Disc_D3_P2.5 | C5 |
| 1 | 470R | Resistors_THT:Resistor_Horizontal_RM7mm | R3 |
| 1 | 8k2 | Resistors_THT:Resistor_Horizontal_RM7mm | R14 |
| 1 | CONN_01X03 | Socket_Strips:Socket_Strip_Straight_1x03 | P1 |
| 1 | D | Wire_Pads:SolderWirePad_single_2mmDrill | P3 |
| 1 | DAC | Pin_Headers:Pin_Header_Straight_1x01 | P8 |
| 1 | G | Wire_Pads:SolderWirePad_single_2mmDrill | P4 |
| 1 | LM324 | Housings_DIP:DIP-14_W7.62mm_LongPads | U1 |
| 1 | PWM | Socket_Strips:Socket_Strip_Straight_1x02 | P2 |
| 1 | S | Wire_Pads:SolderWirePad_single_2mmDrill | P5 |
| 1 | SEN_I | Socket_Strips:Socket_Strip_Straight_1x02 | P10 |
| 1 | SEN_U | Socket_Strips:Socket_Strip_Straight_1x02 | P9 |
| 1 | V+ | Wire_Pads:SolderWirePad_single_2mmDrill | P6 |
| 1 | V- | Wire_Pads:SolderWirePad_single_2mmDrill | P7 |
More from sangseu/kicad
10- 2 layers

- 2 layers

- 2 layers213.1 × 165.9 mm

- 2 layers206.1 × 150.5 mm

- 2 layers152.4 × 86.4 mm

- 2 layers150.5 × 90.8 mm

- 2 layers140 × 70 mm

- 2 layers224.2 × 130.8 mm

- 2 layers142.2 × 17.8 mm

- 2 layers

Similar boards
- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers36.8 × 34.7 mm

Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 4 layers82.6 × 82.5 mm

- 2 layers231.1 × 106.7 mm

- 4 layers82.6 × 82.6 mm

- 4 layers72.4 × 95.3 mm

DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers191.5 × 76 mm

Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0 - 4 layers292.1 × 88.3 mm

Snark barker mca
schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers
177 parts69
Questions
What parts does the Begin use?
35 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Begin KiCad files?
From the sangseu/kicad repository on GitHub, at the commit this page was made from: the board is project/begin/begin.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Begin design in my own project?
Its repository states no licence, so its author keeps all rights: ask sangseu before reusing the design.