Skip to the content
4 layers33.1 × 32.2 mmLED Earrings Charging Board, the printed circuit board in 3D

Tiny 8x8mm ear studs (inspired by Mitxela) with 16 LEDs on each, arranged in a 4x4 matrix. Each matrix is controlled by a MAX32660 microcontroller paired with an accelerometer to react to orientation changes.

Size
33.1 × 32.2 mm
Copper layers
4
Thickness
0.4 mm
Parts
112
Nets
86
Pads
476
Tracks, vias
2,081, 135
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Mar 2026
Updated
24 Aug 2026

Overview

LED Earrings Charging Board is an open-source printed circuit board by sandgum, from the sandgum/Triangulate-MS_01-Matrix-LED-Studs repository on GitHub. It is a 4-layer board of 33.1 × 32.2 mm with 112 parts on 86 nets, routed with 2,081 tracks and 135 vias.

It is built around the ATMEGA328P-MU, MAX17048X+T10 and XC6206P332MR-G, with the WS2812B-2020, BSS138 and TYPE-C-31-M-12 among its other parts. Its parts include 35 resistors, 24 capacitors, 15 diodes, 6 ICs and 6 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

7

README

README.md

MatrixStuds

Description

Tiny 10x10mm ear studs (inspired by Mitxela) with 16 LEDs on each, arranged in a 4x4 matrix. Each matrix is controlled by an Analog Devices MAX32660 microcontroller paired with a Bosch BMA530 accelerometer to react to orientation changes. Each stud features a tiny 3.7v-3.3v step-down converter to accept rechargeable Li-ion cells. All tied up together in a CNC'd steel enclosure.

Screenshot 2026-04-04 at 11 23 14 am

PCB (Studs)

Overview

  • 4-layer double-stacked rigid PCB (8 layers when assembled)
  • Matrix on one "part" of PCB, other electronics on other "part"
  • Features interconnect pads on back of each PCB to interface between the two "parts"
  • 0.4mm thickness, 0.8mm total stacked thickness
  • Features 1mm pads for programming, power pins

Schematic

Screenshot 2026-04-04 at 11 30 57 am

PCB Layout

Screenshot 2026-04-04 at 11 31 59 am

Top Layer

Screenshot 2026-04-04 at 11 32 11 am

Bottom Layer

Screenshot 2026-04-04 at 11 38 30 am

3D Model (Bottom Side)

Screenshot 2026-04-04 at 11 38 48 am

3D Model (Top Side)

PCB (Charging Board)

Overview

  • 4-layer double-stacked rigid PCB (8 layers when assembled)
  • Side 1:
  • Battery charging circuitry for two batteries (fuel gauge and charger)
  • USB-C Port
  • ATMega328P microcontroller for controlling lights
  • Side 2:
  • 9x WS2812B 2mm NeoPixel Lights
  • Reset SPDT switch for MCU

Schematic

Screenshot 2026-05-03 at 11 30 13 am

PCB Layout

Screenshot 2026-05-03 at 11 30 37 am

Top Layer

Screenshot 2026-05-03 at 11 31 29 am

Bottom Layer

Screenshot 2026-05-03 at 12 21 00 pm

3D Model (Top Side)

Screenshot 2026-05-03 at 12 21 12 pm

3D Model (Bottom Side)

Enclosure

Overview (Studs)

  • CNC stainless steel construction
  • Two-part design, one for battery side, one for top side
  • Translucent PP diffuser over LED matrix
  • Push-lock mechanism two secure both sides
  • Permanent power wire going from battery side to top side in accent colour
  • Points on back of top side for rotational stability while on ear

Overview (Charging Dock)

  • CNC steel upper construction, 3D-printed plastic lower construction
  • Battery charging GND connection made through upper case, positive connection made through insulated copper springs
  • Magnets to secure studs
  • USB-C charging, SoC indication through adressable RGB strip

Images (Studs)

Screenshot 2026-04-04 at 11 36 01 am Screenshot 2026-04-04 at 11 36 17 am Screenshot 2026-04-04 at 11 36 41 am Screenshot 2026-04-04 at 11 36 59 am

Images (Charging Dock)

Screenshot 2026-05-03 at 12 22 40 pm Screenshot 2026-05-03 at 12 23 12 pm Screenshot 2026-05-03 at 12 23 26 pm Screenshot 2026-05-03 at 12 23 36 pm Screenshot 2026-05-03 at 12 23 51 pm

Bill of Materials (Coming soon)

Parts

112
QtyValueFootprintReferences
2310KResistor_SMD:R_0201_0603MetricR22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37 +7
10100nFCapacitor_SMD:C_0201_0603MetricC11, C12, C13, C14, C15, C16, C17, C18, C19, C20
9WS2812B-2020LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD9, D10, D11, D12, D13, D14, D16, D17, D18
81uFCapacitor_SMD:C_0201_0603MetricC1, C3, C5, C6, C57, C58, C59, C60
6BSS138Package_TO_SOT_SMD:SOT-23Q3, Q4, Q5, Q6, Q7, Q8
6LEDLED_SMD:LED_0201_0603MetricD1, D2, D3, D4, D5, D6
41.18kResistor_SMD:R_0201_0603MetricR4, R5, R8, R10
41.5kResistor_SMD:R_0201_0603MetricR1, R2, R11, R12
3TestPointTestPoint:TestPoint_Pad_D1.0mmTP14, TP16, TP17
210kResistor_SMD:R_0201_0603MetricR3, R9
210pFCapacitor_SMD:C_0201_0603MetricC9, C10
222pFCapacitor_SMD:C_0201_0603MetricC7, C8
24.7uFCapacitor_SMD:C_0201_0603MetricC2, C4
25.1kResistor_SMD:R_0201_0603MetricR6, R7
2BQ24075RGTRBQ24075RGTR:QFN50P300X300X100-17NU1, U2
2Battery+TestPoint:TestPoint_Pad_D1.5mmTP1, TP3
2GNDTestPoint:TestPoint_Pad_2.0x2.0mmTP2, TP4
2MAX17048X+T10MAX17048X+T10:21-0555B_W80B1-1_MXMU12, U13
2TYPE-C-31-M-12Type C 31 M 12 Model:HRO_TYPE-C-31-M-12J1, J1
15VTestPoint:TestPoint_Pad_D1.0mmTP11
1ATmega328P-MPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mmU3
1DIN_LEDTestPoint:TestPoint_Pad_D1.0mmTP18
1DOUT_MCUTestPoint:TestPoint_Pad_D1.0mmTP13
1DTRTestPoint:TestPoint_Pad_D1.0mmTP10
1LOGOLOGOG***
1MISOTestPoint:TestPoint_Pad_D1.0mmTP6
1MOSITestPoint:TestPoint_Pad_D1.0mmTP5
1RESET_1TestPoint:TestPoint_Pad_D1.0mmTP23
1RESET_2TestPoint:TestPoint_Pad_D1.0mmTP12
1RXTestPoint:TestPoint_Pad_D1.0mmTP9
1SCKTestPoint:TestPoint_Pad_D1.0mmTP7
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW1
1TXTestPoint:TestPoint_Pad_D1.0mmTP8
1VCC_LEDTestPoint:TestPoint_Pad_D1.0mmTP19
1VCC_O_LEDTestPoint:TestPoint_Pad_D1.0mmTP20
1X322516MLB4SIX322516MLB4SI:OSC_X322516MLB4SIY1
1XC6206P332MR-G-SOT23XC6206P332MR-G-SOT23:SOT-23U4

The 111 most common of 112 parts.

More from sandgum/Triangulate-MS_01-Matrix-LED-Studs

1
  • 4 layers26.3 × 16 mmLED Earrings, the printed circuit board in 3D

    LED Earrings

    sandgum/Triangulate-MS_01-Matrix-LED-Studs

    Tiny 8x8mm ear studs (inspired by Mitxela) with 16 LEDs on each, arranged in a 4x4 matrix. Each matrix is controlled by a MAX32660 microcontroller paired with an accelerometer to react to orientation changes.

    54 parts

Similar boards

  • 4 layers64.6 × 55.2 mmWhisker, the printed circuit board in 3D

    Whisker

    HeyPCB/whisker

    Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.

    118 partsCERN-OHL-S-2.0
  • 4 layers93.5 × 72.3 mmLeptosis left, the printed circuit board in 3D

    Leptosis left

    cheyao/leptosis

    Ultra flat PG1316 bluetooth split keyboard

    91 parts60
  • 2 layers111 × 39.5 mmAddon panel, the printed circuit board in 3D

    Addon panel

    NotARealDevOrDesigner/rs1_pcb

    116 parts
  • 4 layers100 × 91.4 mmSurprise, the printed circuit board in 3D

    Surprise

    marmbrus/circuits

    173 parts
  • 2 layers88.9 × 50.8 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    dj505/BusinessCard

    68 parts
  • 2 layers80.7 × 71.6 mmHeartPCBGift, the printed circuit board in 3D

    HeartPCBGift

    oskarhuotari/HeartPCBGift

    The PCB: A heart shaped board that has 30 leds around the outer perimeter. The MCU used is the ATMEGA32U4 and the leds are controlled using charlieplexing.

    67 parts
  • 2 layersErgonomicGamepad, the printed circuit board in 3D

    ErgonomicGamepad

    vemcg/ErgonomicGamepad

    Custom ergonomic gaming keypad PCB project (KiCad) with a 4x6 key matrix, hot-swap sockets, and USB-C.

    86 partsGPL-3.0
  • 2 layers31.9 × 36 mmLemon pcb swizzle, the printed circuit board in 3D

    Lemon pcb swizzle

    rianadon/Cosmos-Keyboard-PCBs

    Open-Source keyboard PCB designs for the Cosmos Keyboard Generator

    63 parts43

Questions

How big is the LED Earrings Charging Board PCB?

It measures 33.1 × 32.2 mm and has 4 copper layers, 0.4 mm thick.

What parts does the LED Earrings Charging Board use?

112 parts, built around the ATMEGA328P-MU, MAX17048X+T10, XC6206P332MR-G and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED Earrings Charging Board KiCad files?

From the sandgum/Triangulate-MS_01-Matrix-LED-Studs repository on GitHub, at the commit this page was made from: the board is PCB/LED Earrings Charging Board/LED Earrings Charging Board.kicad_pcb and its schematic PCB/LED Earrings Charging Board/LED Earrings Charging Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED Earrings Charging Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask sandgum before reusing the design.