
Controle
SamuelDotDoc/Eletronic-projects
Repositório para estudos de eletrônica e Design de PCB

Repositório para estudos de eletrônica e Design de PCB
PonteH CI is an open-source printed circuit board by SamuelDotDoc, from the SamuelDotDoc/Eletronic-projects repository on GitHub. It is a 2-layer board of 106.9 × 71.1 mm with 21 parts on 13 nets, routed with 191 tracks and 27 vias.
It is built around the L298N. Its parts include 8 diodes, 5 connectors, 2 capacitors and 2 ICs.
Repositório para estudos de Eletrônica e Design de PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D | Diode_THT:D_5W_P12.70mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 3 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J2, J3 |
| 2 | CP | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | L298N | L298N:TO127P500X2020X2210-15P | IC1 |
| 1 | L78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline | U1 |
The 17 most common of 21 parts.

SamuelDotDoc/Eletronic-projects
Repositório para estudos de eletrônica e Design de PCB

SamuelDotDoc/Eletronic-projects
Repositório para estudos de eletrônica e Design de PCB

SamuelDotDoc/Eletronic-projects
Repositório para estudos de eletrônica e Design de PCB


SamuelDotDoc/Eletronic-projects
Repositório para estudos de eletrônica e Design de PCB


pedro-ibs/trekking
Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”

FabioNMI/C64PSU
A low-cost, lightweight and very reliable power supply for the Commodore 64

Khuzhin06/RoboForce
Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.


CainPatel/diy-ert
A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.

dduarteCE/Robot-vacuum
Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.

It measures 106.9 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SamuelDotDoc/Eletronic-projects repository on GitHub, at the commit this page was made from: the board is PonteH-CI/PonteH-CI/PonteH-CI.kicad_pcb and its schematic Controle/Controle.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SamuelDotDoc before reusing the design.