

ESP32 CAN TEST
my PCBS
- Size
- 45.7 × 45.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 56
- Pads
- 153
- Tracks, vias
- 273, 72
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Jan 2022
- Updated
- 24 Aug 2022
Overview
ESP32 CAN TEST is an open-source printed circuit board by SamsonChau, from the SamsonChau/PCB repository on GitHub. It is a 2-layer board of 45.7 × 45.8 mm with 40 parts on 56 nets, routed with 273 tracks and 72 vias.
It is built around the TJA1051T, ESP32-WROOM-32 and MP1584EN, with the AMS1117, SMBJ24CA and SS34 among its other parts. Its parts include 10 capacitors, 7 connectors, 6 resistors, 5 ICs and 5 diodes. It belongs with the ESP32 boards of this library.
Main components
6TJA1051T
SOIC-8-40℃~+150℃ 2.5mA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMP1584EN
SOIC-8-EP-20℃~+85℃ 1 100kHz~1.5MHz 4.5V~28V Adjustable Buck Buck Built-in SOIC-8-EP DC-DC Converters ROHSMonolithic Power SystemsDC-DC ConvertersAMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorisedSMBJ24CA
DO-214AA(SMB)ESD And Surge Protection (TVS/ESD)hongjiachengSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdPCB
my PCBS
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C7 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C10, C12 |
| 2 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R9 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5 |
| 2 | EN | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 2 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 2 | Molex_2x2 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J3, J5 |
| 2 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U5 |
| 2 | user | LED_SMD:LED_0805_2012Metric | D2, D5 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 16V 22UF | Capacitor_SMD:CP_Elec_6.3x7.7 | C9 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 3.3v | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | 50V 10uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C6 |
| 1 | 5v | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP4 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | Encoder2 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Encoder_1 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | GH1.25 | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J7 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LOGO | PolyuRobotics:Club_logo | G*** |
| 1 | MP1584 | PolyuRobotics:DC-DC-mp1584_module | U3 |
| 1 | SMBJ24CA | Diode_SMD:D_SMB | D3 |
| 1 | SS34 | Diode_SMD:D_SMB | D4 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | XT60 | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J1 |
More from SamsonChau/PCB
12- 2 layers146.1 × 63.5 mm

- 2 layers49 × 59 mm

- 2 layers

- 2 layers80.8 × 107.2 mm

- 2 layers181 × 40.6 mm

- 2 layers139.7 × 104.9 mm

- 2 layers85 × 97.4 mm

- 2 layers53.3 × 56.4 mm

- 2 layers141 × 67.6 mm

- 2 layers61.1 × 53.3 mm

- 2 layers53.3 × 51.8 mm

- 2 layers73.8 × 34 mm

Similar boards
- 2 layers45 × 55 mm

DongleALIVEv2.0
joaogabrielsantosD/Dongle-eaLIVE-PCB
PCB of the DongleEALIVE for reading data from the vehicle's CAN bus with telemetry via BLE, supporting GPS and accelerometer.
77 parts1 - 2 layers130.5 × 91.1 mm

Robot Main Controller V3
manhtienvu-vn/Defensive_Robot
Full neccessary document my team PKA-03 (Phenikaa University) used to build a defensive robot in the Vietnam Robocon competition 2025, including firmware, hardware and mechanical design.
128 parts - 2 layers93.4 × 87.4 mm

- 2 layers38.5 × 67.3 mm

- 2 layers64.3 × 88.3 mm

- 4 layers120 × 105 mm

Dlr carrier
arcnode-io/dlr-rtu-pcb
Solar-powered RTU sensor HAT for transmission tower DLR deployment
89 parts - 2 layers84.5 × 94.5 mm

- 4 layers50.8 × 22.9 mm

Bench stim wing
ThatguyCplus/throttleECU
STM32F411CE Throttle ECU — PID position control with AS5048A encoder, H-bridge motor, safety module
114 parts1
Questions
How big is the ESP32 CAN TEST PCB?
It measures 45.7 × 45.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 CAN TEST use?
40 parts, built around the TJA1051T, ESP32-WROOM-32, MP1584EN and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 CAN TEST KiCad files?
From the SamsonChau/PCB repository on GitHub, at the commit this page was made from: the board is ESP32_CAN_TEST/ESP32_CAN_TEST.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 CAN TEST design in my own project?
Its repository states no licence, so its author keeps all rights: ask SamsonChau before reusing the design.