

DashBox2
Hitbox style game controller, built from the ground up.
- Size
- 229 × 113 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 42
- Pads
- 177
- Tracks, vias
- 227, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Aug 2026
- Updated
- 6 Sep 2026
Overview
DashBox2 is an open-source printed circuit board by sambain1090, from the sambain1090/DashBox2 repository on GitHub. It is a 2-layer board of 229 × 113 mm with 36 parts on 42 nets, routed with 227 tracks and 20 vias.
It is built around the AMS1117-3.3. Its parts include 18 switches, 6 capacitors, 4 resistors, 2 ICs and 1 connector. It belongs with the STM32 boards of this library.
Main components
1README
README.mdDashBox2
This repository will contain a set of files needed to create a DashBox2. The Dashbox2 is planned to be a leverless videogame controller for use predominantly in fighting games. Once the design for the controller is complete, the repository will include CAD files for the controller case, KiCad files for the PCB and programs to configure the controller to work properly across devices
Currently the repository only contains the KiCad files for an initial PCB, but a program that can be flashed onto the STM32 is currently be developed.
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 3 | 100nF | Capacitor_SMD:C_01005_0402Metric | C1, C3, C6 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10uF | Capacitor_SMD:C_01005_0402Metric | C5 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 22uF | Capacitor_SMD:C_01005_0402Metric | C4 |
| 1 | 4.7uF | Capacitor_SMD:C_01005_0402Metric | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BOOT0 | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | CIRCLE | KalilSockets:SW_Kailh_Choc_V2_THT | SW13 |
| 1 | CROSS | KalilSockets:SW_Kailh_Choc_V2_THT | SW12 |
| 1 | DOWN | KalilSockets:SW_Kailh_Choc_V2_THT | SW5 |
| 1 | L1 | KalilSockets:SW_Kailh_Choc_V2_THT | SW11 |
| 1 | L2 | KalilSockets:SW_Kailh_Choc_V2_THT | SW3 |
| 1 | L3 | KalilSockets:SW_Kailh_Choc_V2_THT | SW15 |
| 1 | LEFT | KalilSockets:SW_Kailh_Choc_V2_THT | SW4 |
| 1 | NRST | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | OPT1 | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW16 |
| 1 | OPT2 | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW17 |
| 1 | OPT3 | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW18 |
| 1 | R1 | KalilSockets:SW_Kailh_Choc_V2_THT | SW10 |
| 1 | R2 | KalilSockets:SW_Kailh_Choc_V2_THT | SW14 |
| 1 | RIGHT | KalilSockets:SW_Kailh_Choc_V2_THT | SW6 |
| 1 | SQUARE | KalilSockets:SW_Kailh_Choc_V2_THT | SW8 |
| 1 | STM32G0B1KBUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | TRIANGLE | KalilSockets:SW_Kailh_Choc_V2_THT | SW9 |
| 1 | UP | KalilSockets:SW_Kailh_Choc_V2_THT | SW7 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
More from sambain1090/DashBox2
1- 2 layers

Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the DashBox2 PCB?
It measures 229 × 113 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DashBox2 use?
36 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DashBox2 KiCad files?
From the sambain1090/DashBox2 repository on GitHub, at the commit this page was made from: the board is PCBFiles/DashBox2.kicad_pcb and its schematic PCBFiles/DashBox2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DashBox2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask sambain1090 before reusing the design.