
Mnet uart
gajdi88/M-NET-Thermostat
Smart thermostat for Mitsubishi's M-NET communication protocol

Digital Stoper on custom PCB
TimerS is an open-source printed circuit board by saidhann, from the saidhann/digital-stopwatch-pcb repository on GitHub. It is a 2-layer board of 140 × 65 mm with 66 parts on 90 nets, routed with 735 tracks and 19 vias.
It is built around the NA555P and L7805. Its parts include 36 resistors, 15 ICs, 7 capacitors, 2 switches and 1 connector.
A hardware + firmware project implementing a 4-digit digital stopwatch built around a custom-designed PCB. The firmware is written in C and targets an embedded microcontroller, while the accompanying documentation provides full schematics and design details.
Stoper (Polish for stopwatch) is an embedded systems project combining custom PCB design with bare-metal C firmware. The device displays elapsed time on a 4-digit 7-segment display and supports standard stopwatch operations such as start, stop, and reset — all driven by hardware buttons on the board.
The project includes both the firmware source code and a PDF document (Stoper 4 cyfrowy.pdf) containing the full circuit schematic and PCB design details.
MM:SS or SS.mm formatThe project is built around a custom PCB. Key components typically include:
| Component | Description |
|---|---|
| Microcontroller | Embedded MCU (see schematic for part number) |
| Display | 4-digit 7-segment LED display |
| Buttons | Start, Stop, Reset tactile switches |
| Power supply | On-board regulation (see schematic) |
| Crystal / oscillator | Accurate timekeeping source |
📄 Refer to
Stoper 4 cyfrowy.pdfin the repository root for the full schematic, BOM (Bill of Materials), and PCB layout details.
Stoper/
├── timer/ # Firmware source code
│ └── main.c # Main application entry point
├── Stoper 4 cyfrowy.pdf # Circuit schematic & PCB documentation
└── README.mdTo build and flash the firmware you will need:
avr-gcc for AVR, arm-none-eabi-gcc for ARM Cortex-M)make or your preferred build toolCheck the schematic PDF to identify the exact microcontroller used and choose the appropriate toolchain.
git clone https://github.com/saidhann/Stoper.git
cd Stoper/timer
# Example for AVR-based MCU:
make
# Or compile manually:
avr-gcc -mmcu=<mcu-name> -o main.elf main.c
avr-objcopy -O ihex main.elf main.hexReplace <mcu-name> with the actual MCU identifier (e.g., atmega328p).
# Example using avrdude (AVR):
avrdude -c usbasp -p <mcu-name> -U flash:w:main.hex
# Example using OpenOCD (ARM Cortex-M):
openocd -f interface/stlink.cfg -f target/<target>.cfg \
-c "program main.elf verify reset exit"Refer to the schematic PDF for the programmer pinout and fuse bit settings if applicable.
The file Stoper 4 cyfrowy.pdf contains:
Open it with any standard PDF viewer. The document is written in Polish.
Contributions are welcome! To contribute:
git checkout -b feature/my-improvementgit commit -m "Add my improvement"This project does not currently specify a license. Please contact the author before using or distributing this work.
Built with ❤️ using C, a soldering iron, and a custom PCB.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +14 |
| 6 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R31, R32, R33, R34, R35, R36 |
| 4 | 74LS47 | Package_DIP:DIP-16_W7.62mm_LongPads | U2, U6, U9, U12 |
| 4 | 74LS90 | Package_DIP:DIP-14_W7.62mm_LongPads | U1, U5, U8, U11 |
| 4 | ~ | Package_DIP:DIP-10_W7.62mm_LongPads | U3, U7, U10, U13 |
| 3 | 10n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 2 | NA555P | Package_DIP:DIP-8_W7.62mm | U14, U15 |
| 1 | 1u | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C7 |
| 1 | 470n | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P7.50mm | C5 |
| 1 | 470n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C6 |
| 1 | 47n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C4 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | Power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Piher_PT-6-V_Vertical | RV1 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2 |
| 1 | Start/Stop | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
The 62 most common of 66 parts.

gajdi88/M-NET-Thermostat
Smart thermostat for Mitsubishi's M-NET communication protocol

KhushiShah63/DC-Motor-Speed-Controller-
A 555 timer–based DC motor speed controller designed to control the speed of a DC motor using PWM (Pulse Width Modulation).

Nik-Sch/EDiC
Developement, Simulation and Emulation of an 8 bit CPU including a Software Framework for my Masters Thesis




GokulS20G/queaky-stem-toy-pcb
PCB design of a Queaky Stem Toy using KiCad with schematic, layout, and Gerber files.

It measures 140 × 65 mm and has 2 copper layers, 1.6 mm thick.
66 parts, built around the NA555P and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the saidhann/digital-stopwatch-pcb repository on GitHub, at the commit this page was made from: the board is timer/TimerS.kicad_pcb and its schematic timer/TimerS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask saidhann before reusing the design.