

Mnet uart
Smart thermostat for Mitsubishi's M-NET communication protocol
- Size
- 55.9 × 64.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 34
- Pads
- 109
- Tracks, vias
- 202, 26
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Jan 2024
- Updated
- 22 Feb 2026
Overview
Mnet uart is an open-source printed circuit board by gajdi88, from the gajdi88/M-NET-Thermostat repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 55.9 × 64.8 mm with 33 parts on 34 nets, routed with 202 tracks and 26 vias.
It is built around the LM2672N-3.3, LM2672N-5.0 and 74LS04PC, with the NA555P, B350 and 2N7002K among its other parts. Its parts include 10 capacitors, 10 resistors, 6 ICs, 2 diodes and 2 connectors. It belongs with the interfaces and adapters boards of this library.
Main components
6LM2672N-3.3
PDIP-8-40℃~+125℃@(TJ) 1 1A 260kHz 3.3V 6.5V~40V Buck Buck Built-in Fixed No PDIP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM2672N-5.0
PDIP-8-40℃~+125℃@(TJ) 1 1A 260kHz 5V 6.5V~40V Buck Buck Built-in Fixed No PDIP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInvertersNA555P
PDIP-8-40℃~+105℃ 100kHz 4.5V~16V PDIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / CountersB350
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 500uA@50V 50V 700mV@3A SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes2N7002K
SOT-23-55℃~+150℃ 1 N-channel 1.2Ω@10V、1.4Ω@5V 1.6V 2.9pF 300pC@4.5V 30pF 380mA 4.2pF 540mW 60V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdM-NET-Thermostat
Smart thermostat for Mitsubishi's M-NET communication protocol
Massive thanks to Len Shustek for figuring out the protocol. This project largely builds on his work at https://github.com/LenShustek/M-NET-Sniffer
Project bundles a simulation of the M-NET to Serial converter - including conversion to 3.3V TTL logic in preparation for a Raspberry Pi to interpret the signals.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R9, R10 |
| 2 | 100uF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 200nF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 68uF | Capacitor_SMD:C_0805_2012Metric | C9, C10 |
| 2 | B350 | Diode_SMD:D_SMC | D1, D2 |
| 2 | INDUCTOR | Inductor_THT:L_Axial_L6.6mm_D2.7mm_P10.16mm_Horizontal_Vishay_IM-2 | L1, L2 |
| 2 | LM741 | Package_DIP:DIP-8_W7.62mm | U1, U2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2 |
| 1 | 1.8k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 2N7002K | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | LM2672N-3.3 | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | LM2672N-5.0 | Package_DIP:DIP-8_W7.62mm | U5 |
| 1 | NA555P | Package_DIP:DIP-8_W7.62mm | U4 |
Similar boards
- 2 layers264.8 × 118.6 mm

- 4 layers189.3 × 134.8 mm

- 2 layers33 × 74.9 mm

Smart penetrometer
ARTS-Laboratory/SPECIES
Design and development of a deployable UAV smart penetrometer
20 parts6CC-BY-SA-4.0 - 2 layers32.1 × 35.5 mm

- 2 layers80 × 65 mm

- 2 layers125 × 113 mm

- 2 layers47.7 × 36.7 mm

- 2 layers66.5 × 37.5 mm

DC Motor Speed Controller-
KhushiShah63/DC-Motor-Speed-Controller-
A 555 timer–based DC motor speed controller designed to control the speed of a DC motor using PWM (Pulse Width Modulation).
19 parts1
Questions
How big is the Mnet uart PCB?
It measures 55.9 × 64.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mnet uart use?
33 parts, built around the LM2672N-3.3, LM2672N-5.0, 74LS04PC and NA555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mnet uart KiCad files?
From the gajdi88/M-NET-Thermostat repository on GitHub, at the commit this page was made from: the board is m-net to serial electronics/kicad/mnet-uart/mnet-uart.kicad_pcb and its schematic m-net to serial electronics/kicad/mnet-uart/mnet-uart.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mnet uart design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).