Skip to the content
2 layers50 × 56 mmThe Flying Charizard, the printed circuit board in 3D

A Simple STM32-based flight controller PCB with Charizard-themed artwork etched into the board layers.

Size
50 × 56 mm
Copper layers
2
Thickness
1.6 mm
Parts
79
Nets
88
Pads
313
Tracks, vias
759, 96
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
30 May 2026
Updated
22 Jun 2026

Overview

The Flying Charizard is an open-source printed circuit board by sahilchess, from the sahilchess/The-Flying-Charizard repository on GitHub. It is a 2-layer board of 50 × 56 mm with 79 parts on 88 nets, routed with 759 tracks and 96 vias.

It is built around the BMP580, TPS63070RNMR and TF-01A, with the ICM-45686, TS-1088-AR02016 and FCM1608KF-601T03 among its other parts. Its parts include 37 capacitors, 22 resistors, 6 ICs, 4 inductors and 3 connectors. It belongs with the STM32 boards of this library.

Main components

8

README

README.md

The Flying Charizard

A Simple STM32-based flight controller PCB with Charizard-themed artwork etched into the board layers.

Overview

The Flying Charizard is a fully custom PCB designed around the STM32F722RETx microcontroller for flight control applications.
It combines practical avionics hardware with Pokémon-inspired PCB art across copper and silkscreen layers.

Features

  • STM32 microcontroller (STM32F722RETx)
  • USB-C power and communication
  • Battery charge management (RA9357RNER)
  • Buck-boost converter (TPS63070RNNR) for stable power delivery
  • Barometric pressure sensor (BMP390)
  • Accelerometer / gyroscope (KN-45696) for IMU
  • Dual crystal oscillators
  • SD card interface
  • 2x servo headers
  • Reset and boot buttons
  • LiPo battery connector (BAT+)
  • Custom Charizard copper art across F.Cu and B.Cu layers

Schematic Sections

BlockComponent
MCUSTM32F722RETx
USB-CTYPE-C 16PIN 2MD
Pressure SensorBMP390
IMUKN-45696 (Accel/Gyro)
Battery ChargerRA9357RNER
Buck-BoostTPS63070RNNR
Power SwitchLM951130
SD CardOLA-Z2869250

PCB

Designed in KiCad as a 2-layer board with Charizard artwork embedded in copper pours and silkscreen.

The artwork includes:

  • Charizard
  • Dragonite
  • Charmander
  • Mega Charizard X

Gallery

Schematic

Flying Charizard Schematic

PCB / Artwork

Flying Charizard Image 2 Flying Charizard Image 3 Flying Charizard Image 4

Author

@Sahild

Parts

79
QtyValueFootprintReferences
1510KResistor_SMD:R_0402_1005MetricR6, R7, R8, R9, R10, R11, R12, R13, R16, R17, R18, R19, R20, R21, R22
13100nFResistor_SMD:R_0402_1005MetricC4, C14, C15, C19, C20, C21, C22, C23, C24, C25, C26, C27, C37
910uFResistor_SMD:R_0402_1005MetricC2, C3, C5, C6, C7, C8, C9, C12, C31
522uFResistor_SMD:R_0603_1608MetricC10, C11, C13, C17, C18
41uFResistor_SMD:R_0402_1005MetricC1, C28, C29, C30
215pFResistor_SMD:R_0402_1005MetricC35, C36
22.2uFResistor_SMD:R_0402_1005MetricC16, C32
220pFResistor_SMD:R_0402_1005MetricC33, C34
25.1KResistor_SMD:R_0402_1005MetricR1, R2
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2, J3
2TS-1088-AR02016lcsc:SW-SMD_L3.9-W3.0-P4.45SW1, SW2
11.5uHlcsc:IND-SMD_L4.0-W4.0-AL2
1100KResistor_SMD:R_0603_1608MetricR14
11uHlcsc:L2520L1
122.1KResistor_SMD:R_0402_1005MetricR15
130.1KResistor_SMD:R_0402_1005MetricR5
1383Resistor_SMD:R_0402_1005MetricR3
15.23KResistor_SMD:R_0402_1005MetricR4
15.6uHlcsc:IND-SMD_L3.0-W3.0L3
1BMP580lcsc:LGA-10_L2.0-W2.0-P0.50-TL_BMP580U6
1BQ25883RGERlcsc:VFQFPN-24_L4.0-W4.0-P0.50-BL-EP2.8U1
1FCM1608KF-601T03lcsc:L0603L4
1ICM-45686lcsc:LGA-14_L3.0-W2.5-P0.50-TLU4
1LEDLED_SMD:LED_0603_1608MetricD1
1LMR51430lcsc:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BRU3
1Q13FC1350000400lcsc:FC-135R_L3.2-W1.5X2
1STM32F722RETxlcsc:LQFP-64_L10.0-W10.0-P0.50-LS12.0-BLU5
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ1
1TF-01A_C2889258lcsc:TF-SMD_TF-02Card1
1TPS63070RNMRlcsc:VQFN-15_L3.0-W2.5-P0.50-BLU2
1TYPE-C 16PIN 2MDlcsc:USB-C-SMD_TYPE-C-16PIN-2MD-073USB1
1X322525MOB4SIlcsc:CRYSTAL-SMD_4P-L3.2-W2.5-BLX1

Similar boards

  • 2 layers40 × 44.8 mmPolaris, the printed circuit board in 3D

    Polaris

    nsreeni07/Polaris

    A custom-built TVC rocket with a self-designed STM32F722 flight computer (Madgwick AHRS, dual-axis PID, active gimbal correction) for stable, actively-corrected flight.

    82 parts2MIT
  • 2 layers47.7 × 80 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    Sai-Santosh09/Flight-Controller

    Flight Controller is a compact STM32F722-based flight controller designed for drones and other unmanned aerial systems.

    79 parts1
  • 2 layers46 × 42.7 mmFlightController, the printed circuit board in 3D

    FlightController

    Acidicts/FlightController

    PCB BOM UNSELECTED - Most due to not being in stock or I couldn't find them on lcsc

    79 parts
  • 2 layers63.5 × 71.1 mmFlight controller, the printed circuit board in 3D

    Flight controller

    ryukgod26/Simple-Flight-Controller

    79 parts
  • 2 layers51.7 × 55.7 mmFlight controller, the printed circuit board in 3D

    Flight controller

    TrlRizu/Trl-Flight-Controller

    Basic STM32F7 Flight Controller

    83 parts
  • 2 layers50 × 50 mmBoreas, the printed circuit board in 3D

    Boreas

    darshg321/Boreas

    an STM32F7 flight controller for a rocket.

    100 parts

Questions

How big is the The Flying Charizard PCB?

It measures 50 × 56 mm and has 2 copper layers, 1.6 mm thick.

What parts does the The Flying Charizard use?

79 parts, built around the BMP580, TPS63070RNMR, TF-01A and ICM-45686. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the The Flying Charizard KiCad files?

From the sahilchess/The-Flying-Charizard repository on GitHub, at the commit this page was made from: the board is hardware/The Flying Charizard.kicad_pcb and its schematic hardware/The Flying Charizard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the The Flying Charizard design in my own project?

Its repository states no licence, so its author keeps all rights: ask sahilchess before reusing the design.