

Geiger module
Safecast Solarcast sensor device
- Size
- 92 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 25
- Pads
- 132
- Tracks, vias
- 368, 37
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Jan 2017
- Updated
- 24 Aug 2017
Overview
Geiger module is an open-source printed circuit board by Safecast, from the Safecast/Solarcast repository on GitHub. It is a 2-layer board of 92 × 65 mm with 42 parts on 25 nets, routed with 368 tracks and 37 vias.
It is built around the BME280, TPS79133DBV and BC847C. Its parts include 12 capacitors, 10 resistors, 5 ICs, 5 diodes and 2 transistors. It belongs with the sensors and measurement boards and the nRF52 and nRF5x boards of this library.
Main components
3BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorTPS79133DBV
SOT-23-5-40℃~+125℃@(Tj) 1 100mA 170uA 3.3V 5.5V 50mV@(100mA) 75dB@(100Hz) Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBC847C
SOT-23-55℃~+150℃ 1 NPN 100MHz 100mA 100nA 200mW 420 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdSolarcast
Safecast Solarcast sensor device is designed to operate off-grid and sense environmental parameters. It consists of 5 key modules designed for maximal reuse.
Modular design
In an optimal design all modules have their own BLE processor and can be directly combined between each other, initial design is however only partially modular.

Design parameters
The PCBs have to be designed in KiCad package.
License
Open data generated by Safecast is licensed under CC0.
Hardware, Software, and Firmware licenses TBD.
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | 0603_handsolder:0603_HandSoldering | C1, C2, C4, C5, C7, C9, C10, C11, C12 |
| 4 | JUMPER | Socket_Strips:Socket_Strip_Straight_1x02 | JP1, JP2, JP3, JP4 |
| 3 | 100R | 0603_handsolder:0603_HandSoldering | R2, R5, R6 |
| 3 | 10K | 0603_handsolder:0603_HandSoldering | R1, R9, R10 |
| 3 | LED | 0603_handsolder:LED_0603_HandSoldering | D1, D4, D5 |
| 2 | 100K | 0603_handsolder:0603_HandSoldering | R7, R8 |
| 2 | 10uF | 0805_handsolder:0805_HandSoldering | C3, C8 |
| 2 | 1K | 0603_handsolder:0603_HandSoldering | R3, R4 |
| 2 | 1N4148 | SOD-323_standard:SOD-323 | D2, D3 |
| 2 | BC847C | sot_32_standard:SOT-23 | Q1, Q2 |
| 2 | iRover | B3B-PH-SM4-TB_IROVER_CONNECTOR:B3B-PH-SM4-TB_IROVER_CONNECTOR | U1, U4 |
| 1 | 10nF | 0603_handsolder:0603_HandSoldering | C6 |
| 1 | ARM_SWD_SMALL | Socket_Strips:Socket_Strip_Straight_2x02 | J1 |
| 1 | BME280 | BME280:BME280 | U5 |
| 1 | LOGO | OPENHARDWARE:OSHWLOGO1.5IN | G*** |
| 1 | LOGO | OPENHARDWARE:OSHWLOGO0.3IN | G*** |
| 1 | TPS79133 | TPS79133:TPS79133 | U2 |
| 1 | USB_OTG | DCP-USBCB-SC:DCP-USBCB-SC | P1 |
| 1 | nRF52832 | nRF52832:nRF52832-SMD | U3 |
More from Safecast/Solarcast
4- 2 layers125.8 × 128.6 mm

- 2 layers71.1 × 41.1 mm

- 2 layers33.6 × 65.2 mm

- 2 layers9.6 × 21.4 mm

Similar boards
- 2 layers75 × 54 mm

Gree bridge
reparationchlorinateur/gree-bridge
ESP32-S3 board that goes inside a mini-split indoor unit, for Home Assistant and Apple Home (Matter). IR control and wall-remote feedback through the unit's own IR receiver line (most brands); indoor/outdoor bus readout…
51 parts - 2 layers167 × 115 mm

- 2 layers51 × 71 mm

- 2 layers168.5 × 58.8 mm

- 2 layers58 × 100 mm

FullBoardChargePumpCapMult
z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:
40 parts7 - 2 layers91.4 × 40.6 mm

Mhixy
iblue/mhi-xy-bus
Reverse engineering of the Mitsubishi Heavy Industries X/Y Bus as used in FDUM air condition
70 parts6 - 2 layers66.8 × 104.8 mm

- 2 layers78 × 79 mm

Questions
How big is the Geiger module PCB?
It measures 92 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Geiger module use?
42 parts, built around the BME280, TPS79133DBV and BC847C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Geiger module KiCad files?
From the Safecast/Solarcast repository on GitHub, at the commit this page was made from: the board is geiger-module/kicad/geiger-module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Geiger module design in my own project?
Its repository states no licence, so its author keeps all rights: ask Safecast before reusing the design.