2 layers44.5 × 43 mm
Vik universal
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
154 parts220CERN-OHL-P-2.0
2 layers16.2 × 10 mm
Niceview
sadekbaroudi/vik220This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
- Size
- 16.2 × 10 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 12
- Pads
- 19
- Tracks, vias
- 23, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 May 2023
- Updated
- 13 Sep 2025
Overview
Niceview is an open-source printed circuit board by sadekbaroudi, from the sadekbaroudi/vik repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 16.2 × 10 mm with 2 parts on 12 nets, routed with 23 tracks and 7 vias.
README
pcb/per56-cirque-leds/README.mdPER56 Scroll Ring with Cirque Trackpad and LEDs
Overview
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
This was used to demonstrate a build for vulpes minora. See the repo for pictures.
Fabrication and BOM
For PCB fabrication, you can use the files in the production folder.
- gerbers.zip - the file used to fabricate the pcb
- bom.csv - used for PCBA. You can also use the part numbers in this file to look up the exact parts as lcsc.com
- positions.csv - used for PCBA
Using the 3 files above, this has been tested at jlcpcb.com
VIK module certification
| Category | Classification | Response |
|---|---|---|
| FPC connector | Required | :heavy_check_mark: |
| Breakout pins | Recommended | :x: |
| Uses: SPI | Optional | :heavy_check_mark: |
| SPI used for SPI only | Strongly recommended | :heavy_check_mark: |
| Uses: I2C | Optional | :x: |
| I2C used for I2C only | Strongly Recommended | N/A |
| I2C pull ups | Required | N/A |
| Uses: RGB | Optional | :heavy_check_mark: |
| Uses: Extra GPIO 1 | Optional | :heavy_check_mark: |
| Uses: Extra GPIO 2 | Optional | :heavy_check_mark: |
| Standard PCB Size/Mount | Strongly recommended | Large |
PCB images
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | nice!view | fingerpunch:nice_view | Display1 |
| 1 | ~ | vik:vik-module-connector-horizontal | J1 |
Questions
How big is the Niceview PCB?
It measures 16.2 × 10 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Niceview use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Niceview KiCad files?
From the sadekbaroudi/vik repository on GitHub, at the commit this page was made from: the board is pcb/niceview/horizontal-fpc/niceview.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Niceview design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from sadekbaroudi/vik
12- 2 layers94 × 94.5 mm
Vikropad
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
59 parts220CERN-OHL-P-2.0 - 2 layers99 × 65.5 mm
Vik playground
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
40 parts220CERN-OHL-P-2.0 - 2 layers25 × 25 mm
Pmw3610
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
24 parts220CERN-OHL-P-2.0 - 2 layers52 × 46.6 mm
Vik universal
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
24 parts220CERN-OHL-P-2.0 - 2 layers25 × 25 mm
Pmw3360
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
22 parts220CERN-OHL-P-2.0 - 2 layers25.9 × 41.3 mm
Pmw3610
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
22 parts220CERN-OHL-P-2.0 - 2 layers64.8 × 63.5 mm
Scroll wheel trackball
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
21 parts220CERN-OHL-P-2.0 - 2 layers25.9 × 41.3 mm
Pmw3360
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
20 parts220CERN-OHL-P-2.0 - 2 layers64.8 × 63.5 mm
Scroll wheel trackball
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
19 parts220CERN-OHL-P-2.0 - 2 layers25 × 25 mm
Ec11-evqwgd001
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
18 parts220CERN-OHL-P-2.0 - 2 layers25 × 42 mm
Haptic drv2605l
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
15 parts220CERN-OHL-P-2.0
Similar boards
- 2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0 - 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
