sachinp-engineer/PCB-Projects1A collection of PCB design projects created using KiCad. This repository contains schematic designs, PCB layouts, 3D renders, and manufacturing files for various electronics projects.
Buck boost converter is an open-source printed circuit board by sachinp-engineer, from the sachinp-engineer/PCB-Projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.8 × 61 mm with 36 parts on 22 nets, routed with 208 tracks and 15 vias.
It is built around the IRF540N. Its parts include 10 diodes, 8 capacitors, 3 connectors, 3 inductors and 2 resistors. It belongs with the power boards of this library.
Welcome to my PCB Design Projects repository! This repository contains a collection of printed circuit board (PCB) designs created using KiCad. Each project includes the schematic, PCB layout, 3D renders, and project documentation.
Hi, I'm Sachin P, an Electrical and Electronics Engineering (EEE) student with a strong interest in:
This repository showcases my learning journey in PCB design and electronic hardware development.
PCB-Projects/
│
├── Boost-Converter/
│ ├── README.md
│ ├── KiCad Files
│ ├── PCB Layout
│ ├── Schematic
│ └── 3D Images
│
├── Buck-Boost-Converter/
│ ├── README.md
│ ├── KiCad Files
│ ├── PCB Layout
│ ├── Schematic
│ └── 3D Images
│
├── Future-Project-3/
├── Future-Project-4/
│
└── README.mdA DC-DC Boost Converter designed using KiCad that steps up a lower DC input voltage to a higher output voltage.
📁 Folder:
Boost-Converter/A DC-DC Buck-Boost Converter capable of both stepping up and stepping down the input voltage using PWM control.
📁 Folder:
Buck-Boost-Converter/Each project contains:
This repository will continue to grow with more PCB designs, including:
Suggestions and feedback are always welcome. Feel free to open an issue or submit a pull request.
This repository is licensed under the MIT License.
If you find these projects useful, consider giving this repository a ⭐ on GitHub!
Sachin P
🎓 Electrical and Electronics Engineering Student
💡 Interests:
Happy Designing! ⚡
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | D | Diode_SMD:D_SOD-123F | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 8 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J1, J2, J3 |
| 3 | L | Inductor_THT:L_Axial_L5.0mm_D3.6mm_P10.00mm_Horizontal_Murata_BL01RN1A2A2 | L1, L2, L3 |
| 2 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q3 |
| 2 | LM555xM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 2 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4 |
| 2 | R_Potentiometer | Potentiometer_THT:Potentiometer_TT_P0915N | RV1, RV2 |
sachinp-engineer/PCB-Projects
A collection of PCB design projects created using KiCad. This repository contains schematic designs, PCB layouts, 3D renders, and manufacturing files for various electronics projects.
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.
chgopireddy/Full-Bridge-Class-D-Audio-Amplifier
LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
It measures 99.8 × 61 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sachinp-engineer/PCB-Projects repository on GitHub, at the commit this page was made from: the board is Buck-Boost-Converter/Kicad Files/Buck boost converter.kicad_pcb and its schematic Boost-Converter/Kicad Files/PCB 2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).