

BackEnd ESP LoRa v 5.9 2020-07-10 16-37-11
Projects related to Internet of Things (IoT)
- Size
- 49.8 × 49.8 mm
- Copper layers
- 2
- Parts
- 59
- Nets
- 44
- Pads
- 156
- Tracks, vias
- 670, 60
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Jun 2020
- Updated
- 26 Dec 2025
Overview
BackEnd ESP LoRa v 5.9 2020-07-10 16-37-11 is an open-source printed circuit board by sabiinsearch, from the sabiinsearch/IoT repository on GitHub. It is a 2-layer board of 49.8 × 49.8 mm with 59 parts on 44 nets, routed with 670 tracks and 60 vias.
It is built around the AP2112K-3.3TRG1, AP8022H and EL817, with the 470UF 10V 6.3*7, 10D-9 and FR107 among its other parts. Its parts include 14 resistors, 13 diodes, 10 connectors, 9 ICs and 8 capacitors. It belongs with the radio and wireless boards of this library.
Main components
8AP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAP8022H
DIP-8-40℃~+150℃ 10V~35V 58kHz~70kHz 800V 90% Isolation Over Voltage Protection、Under Voltage Protection、Over Current Protection、Short Circuit Protection、Soft Start、Over Temperature Protection PWM Modulation Secondary-Side Feedback DIP-8 AC-DC Controllers and Regulators ROHSMinosAC-DC Controllers And RegulatorsEL817
DIP-4-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 18us 18us 5.8mA 50% 50V 5kV 600% 9V Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output Optoisolators470UF 10V 6.3*7
插件,6.3x7mm1000hrs@105℃ 10V 2.5mm 470uF 6.3mm 7mm 插件,6.3x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - Leaded10D-9
插件,P=7.5mm-55℃~+200℃ 10Ω 11mW/℃ 1A 32s 7.5mm 插件,P=7.5mm NTC Thermistors ROHSRUILONNTC ThermistorsFR107
SOD-123-65℃~+150℃ 1.3V@1A 1A 1kV 25A 500ns 5uA@1kV SOD-123 Fast Recovery / High Efficiency Diodes ROHSJSMSEMIFast Recovery / High Efficiency DiodesIN4148W
SOD-123SOD-123 New Arrivals ROHSWorldUncategorisedSR360
DO-201AD-50℃~+125℃ 1 Independent 3A 500uA@60V 60V 700mV@3A 80A DO-201AD Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdIoT
Infomation related to Internet of Things (I of Things)
Code
- include coding partDesign
- include GUI(external) and PCB designsProjects
- Includes Projects with Internet Of Things
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Terminal | easyeda:SCREW_TERMINAL-5MM | J1, J2, J3, J4, J5, J6, J7, J8 |
| 4 | 100 E | easyeda:R_0805 | R11, R12, R13, R14 |
| 4 | 470 E | easyeda:R_0805 | R1, R2, R9, R10 |
| 4 | BT1 | easyeda:BT136S | D1, D2, D9, D10 |
| 4 | IN4007 | easyeda:DIODES_PICK_HUKAM | D5, D6, D11, D12 |
| 4 | MOC_sw1 | easyeda:DIL06-SMD | U1, U2, U9, U10 |
| 2 | AutoGenerated:MountingHole_2.03mm | , | |
| 2 | 2A222J / 2.2nF | easyeda:CAP_10NF_2A103J | C5, C8 |
| 2 | 330 Ohm | easyeda:R_0805 | R4, R5 |
| 2 | 470uF/10V | easyeda:CAP-D8.0XF3.5 | C1, C6 |
| 1 | 0E | easyeda:R0805 | R7 |
| 1 | 100K | easyeda:R_0805 | R6 |
| 1 | 10D-9 | easyeda:DIP-10.5*5.5MM | NTC |
| 1 | 1uF/63V | easyeda:CAP-D8.0XF3.5 | C2 |
| 1 | 2.2K | easyeda:R_0805 | R3 |
| 1 | 2.2uF | easyeda:C0805 | C7 |
| 1 | 220k | easyeda:0805 | R15 |
| 1 | 4.7uF/400V | easyeda:CAP-D8.0XF3.5 | C4 |
| 1 | 47nf | easyeda:CAP_10NF_2A103J | C3 |
| 1 | 4N35 | easyeda:DIL06-SMD | U13 |
| 1 | AP2112K-3.3TRG | easyeda:SOT23-5 | U3 |
| 1 | AP8022 | easyeda:DIP-8 | U4 |
| 1 | CurrentSensor | easyeda:LOW CURRENT SENSOR - ACS712 | P3 |
| 1 | EL817 | easyeda:DIP-4 | U5 |
| 1 | FR107 | easyeda:DIODES_PICK_HUKAM | D4 |
| 1 | FUSE thermal | easyeda:FUSE THERMAL | F1 |
| 1 | Header-Female-2.54_1x8 | easyeda:HDR-8X1/2.54 | P1 |
| 1 | IN4148 | easyeda:DIODES_PICK_HUKAM | D7 |
| 1 | LED | easyeda:DIODES_PICK | LED1 |
| 1 | PH C4V3 | easyeda:DIODES_PICK_HUKAM | D8 |
| 1 | SR360 | easyeda:DIODES_PICK_HUKAM | D3 |
| 1 | Transformer - EE16-1 | easyeda:TRANSFORMER_SMPS_HUKKAM | T1 |
| 1 | Zener - 4148 | easyeda:DIODES_PICK | U14 |
More from sabiinsearch/IoT
12- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

Similar boards
- 2 layers116.6 × 74.5 mm

Smart switch 3x
pavan-firmware/EH-Master-Repo
This directory contains the KiCad Schematic and PCB Design Project for the EH Smart Switch (3X / 4X Channel with BL0942 Metering).
52 parts - 2 layers99.7 × 48.8 mm

AC DC Wandler
MoElashmawi/Flyback-AC-DC-Converter
Flyback AC-DC Converter (230V AC to 12V DC) — Full SMPS design using VIPer22A PWM Controller. Schematic, PCB layout & 3D render in KiCad.
34 parts1MIT - 4 layers100 × 100.1 mm

Master-4layers
DepBo/AquaCare
AquaCare là hệ thống theo dõi và quản lý nuôi trồng thủy sản, gồm ứng dụng web, ứng dụng di động và backend kết nối dữ liệu cảm biến với thiết bị trong ao/bể.
135 parts1 - 2 layers90.7 × 55.4 mm

H bridge V3
ambadran/Revolute_Joint
Optimal Cheap Robotic Actuator allowing high Torque and moderate Speed. Allow PRECISE Absolute, Speed and Torque Control. Using 3D-printed Cycloidal Drive, Custom PCB and LQR Control Algorithm.
57 parts - 2 layers80 × 120 mm

- 2 layers56.1 × 51.6 mm

Design and fabrication of low power-5V SMPS
gjagadish1/Design-and-fabrication-of-low-power-5V-SMPS
Design and fabrication of a low-power 5V SMPS using KiCad involves schematic design, PCB layout, and testing. The SMPS provides efficient, regulated 5V output for low-power electronic applications.
20 parts - 2 layers140.7 × 91.3 mm

- 2 layers54.3 × 16 mm

DC Motor Driver
ambadran/PCB-Manufacturer
A CNC machine with a kinematic mounting mechanism and customized GRBL Firmware to allow automated end-effector change; Allowing access to all the tools needed to create a PCB without human intervention.
13 parts2
Questions
How big is the BackEnd ESP LoRa v 5.9 2020-07-10 16-37-11 PCB?
It measures 49.8 × 49.8 mm and has 2 copper layers.
What parts does the BackEnd ESP LoRa v 5.9 2020-07-10 16-37-11 use?
59 parts, built around the AP2112K-3.3TRG1, AP8022H, EL817 and 470UF 10V 6.3*7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BackEnd ESP LoRa v 5.9 2020-07-10 16-37-11 KiCad files?
From the sabiinsearch/IoT repository on GitHub, at the commit this page was made from: the board is Designs/PCB/KiCad/Projects/Test_1/BackEnd_ESP_LoRa_v_5.9_2020-07-10_16-37-11.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BackEnd ESP LoRa v 5.9 2020-07-10 16-37-11 design in my own project?
Its repository states no licence, so its author keeps all rights: ask sabiinsearch before reusing the design.