2 layers40 × 60 mm
2 layers228.8 × 154.2 mm
V2panel
s-a-usman/RFID_Lock_PCB- Size
- 228.8 × 154.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 108
- Nets
- 30
- Pads
- 256
- Tracks, vias
- 572, 80
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Nov 2024
- Updated
- 10 Feb 2025
Overview
V2panel is an open-source printed circuit board by s-a-usman, from the s-a-usman/RFID_Lock_PCB repository on GitHub. It is a 2-layer board of 228.8 × 154.2 mm with 108 parts on 30 nets, routed with 572 tracks and 80 vias.
Its parts include 28 connectors, 8 resistors and 8 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R1, R1, R1, R2, R2, R2, R2 |
| 4 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J6, J6, J6 |
| 4 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1, A1, A1, A1 |
| 4 | Buzzer | Buzzer_Beeper:MagneticBuzzer_Kingstate_KCG0601 | BZ1, BZ1, BZ1, BZ1 |
| 4 | Connections | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J2, J2, J2 |
| 4 | G*** | kibuzzard-672CC427 | kibuzzard-672CC427, kibuzzard-672CC427, kibuzzard-672CC427, kibuzzard-672CC427 |
| 4 | G*** | kibuzzard-672CC18C | kibuzzard-672CC18C, kibuzzard-672CC18C, kibuzzard-672CC18C, kibuzzard-672CC18C |
| 4 | G*** | kibuzzard-67336062 | kibuzzard-67336062, kibuzzard-67336062, kibuzzard-67336062, kibuzzard-67336062 |
| 4 | G*** | kibuzzard-672CC353 | kibuzzard-672CC353, kibuzzard-672CC353, kibuzzard-672CC353, kibuzzard-672CC353 |
| 4 | G*** | kibuzzard-672CC227 | kibuzzard-672CC227, kibuzzard-672CC227, kibuzzard-672CC227, kibuzzard-672CC227 |
| 4 | G*** | kibuzzard-672CC267 | kibuzzard-672CC267, kibuzzard-672CC267, kibuzzard-672CC267, kibuzzard-672CC267 |
| 4 | G*** | kibuzzard-672CC3B5 | kibuzzard-672CC3B5, kibuzzard-672CC3B5, kibuzzard-672CC3B5, kibuzzard-672CC3B5 |
| 4 | G*** | kibuzzard-67336038 | kibuzzard-67336038, kibuzzard-67336038, kibuzzard-67336038, kibuzzard-67336038 |
| 4 | G*** | kibuzzard-672CC370 | kibuzzard-672CC370, kibuzzard-672CC370, kibuzzard-672CC370, kibuzzard-672CC370 |
| 4 | G*** | kibuzzard-672CC10E | kibuzzard-672CC10E, kibuzzard-672CC10E, kibuzzard-672CC10E, kibuzzard-672CC10E |
| 4 | G*** | kibuzzard-672CC104 | kibuzzard-672CC104, kibuzzard-672CC104, kibuzzard-672CC104, kibuzzard-672CC104 |
| 4 | G*** | kibuzzard-672CC489 | kibuzzard-672CC489, kibuzzard-672CC489, kibuzzard-672CC489, kibuzzard-672CC489 |
| 4 | G*** | kibuzzard-672CC32C | kibuzzard-672CC32C, kibuzzard-672CC32C, kibuzzard-672CC32C, kibuzzard-672CC32C |
| 4 | G*** | kibuzzard-672CC151 | kibuzzard-672CC151, kibuzzard-672CC151, kibuzzard-672CC151, kibuzzard-672CC151 |
| 4 | GND | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5, J5, J5, J5 |
| 4 | IR_SENSOR | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3, J3, J3, J3 |
| 4 | LED_G | LED_THT:LED_D5.0mm_Clear | D1, D1, D1, D1 |
| 4 | LED_R | LED_THT:LED_D5.0mm | D2, D2, D2, D2 |
| 4 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J7, J7, J7 |
| 4 | RFID_Conn | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1, J1, J1, J1 |
| 4 | SERVO | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4, J4, J4, J4 |
More from s-a-usman/RFID_Lock_PCB
1Similar boards
- 2 layers89.2 × 82.6 mm
Desktop 50 Pin TopConn
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
108 parts459GPL-3.0 - 2 layers312 × 140 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers165 × 113 mm
- 2 layers262 × 113.9 mm
Quacken
Nuclear-Squid/Quacken
Libre, ergonomic, polymorphic: a single PCB for many possible layouts.
108 parts38GPL-3.0 - 2 layers87 × 87 mm
Cn tester panel
aroum/cn_tester
c!n tester is a hardware and software system designed for testing ProMicro-like microcontrollers.
108 parts37MIT - 2 layers161.5 × 106 mm
WaccaProtocolTranslator
FizzyApple12/Waccon
A repository for all of the files in my design for an open-source touch ring controller.
108 parts33 - 2 layers258.2 × 96.8 mm
Narfkb
sebastian-stumpf/narfkb
rp2040 powered split keyboard with rotary encoders and 6mm tactile buttons
108 parts29MIT
Questions
How big is the V2panel PCB?
It measures 228.8 × 154.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the V2panel use?
108 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the V2panel KiCad files?
From the s-a-usman/RFID_Lock_PCB repository on GitHub, at the commit this page was made from: the board is V2panel.kicad_pcb and its schematic V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the V2panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask s-a-usman before reusing the design.