2 layers65 × 56.5 mm
2 layers37.3 × 59.2 mm
MCN003R3
RWeick/NDS-Codebreaker3The full schematic, gerbers, and flash rom dump of the Nintendo DS Codebreaker
- Size
- 37.3 × 59.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 104
- Pads
- 228
- Tracks, vias
- 1,036, 105
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Oct 2022
- Updated
- 26 Nov 2022
Overview
MCN003R3 is an open-source printed circuit board by RWeick, from the RWeick/NDS-Codebreaker repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 37.3 × 59.2 mm with 19 parts on 104 nets, routed with 1,036 tracks and 105 vias.
It is built around the EPM570T100C3. Its parts include 10 capacitors, 3 connectors, 2 ICs, 1 resistor and 1 switch. It belongs with the FPGA and CPLD boards of this library.
Main components
1README
README.mdNDS-Codebreaker
The full schematic, gerbers, and flash rom dump of the Nintendo DS Codebreaker
PCB Thickness: 0.8 mm
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | C_Small | NDS Codebreaker:SMD Component | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 2 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | Hole1, Hole2 |
| 1 | EPM570T100 | GBA:ACTEL FPGA | IC1 |
| 1 | ES29LV160EB | GBA:SOP50P2000X120-48N | IC2 |
| 1 | NDS_Cart_Slot | NDS Codebreaker:Cart Connector | J2 |
| 1 | NDS_Front_Edge_Connector | DSi Action Replay:Edge Connector | J1 |
| 1 | R_Small_US | NDS Codebreaker:SMD Component | R1 |
| 1 | Rear_Side_JTAG_Edge_Connector | DSi Action Replay:Edge Connector | J3 |
| 1 | SW_SPDT | NDS Codebreaker:Slide Switch | SW1 |
Questions
How big is the MCN003R3 PCB?
It measures 37.3 × 59.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MCN003R3 use?
19 parts, built around the EPM570T100C3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCN003R3 KiCad files?
From the RWeick/NDS-Codebreaker repository on GitHub, at the commit this page was made from: the board is MCN003R3.kicad_pcb and its schematic MCN003R3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCN003R3 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 100 mm
- 2 layers43.9 × 27.7 mm
- 2 layers50 × 60 mm
Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm
ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm
- 2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers80 × 80 mm
