2 layers101.6 × 99.7 mm
2 layers160 × 99.1 mm
Pic programmer
rustyoz/kicad2- Size
- 160 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 117
- Pads
- 247
- Tracks, vias
- 366, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Aug 2016
- Updated
- 3 Apr 2018
Overview
Pic programmer is an open-source printed circuit board by rustyoz, from the rustyoz/kicad repository on GitHub. It is a 2-layer board of 160 × 99.1 mm with 63 parts on 117 nets, routed with 366 tracks and 6 vias.
It is built around the 74HC125D, BAT43 and BC307, with the BC237 among its other parts. Its parts include 21 resistors, 12 diodes, 10 connectors, 8 capacitors and 6 ICs. It belongs with the interfaces and adapters boards and the PIC boards of this library.
Main components
4
74HC125D
SO-14-40℃~+125℃ 1 11ns@4.5V,50pF 160uA 2V~6V 4 7.8mA 7.8mA 74HC Tri-State Unidirectional SOIC-14 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
BAT43
DO-204AH-65℃~+125℃ 1 Independent 1V@0.2A 200mA 30V 4A 500nA@25V DO-204AH Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
BC307
TO-92-31 PNP 100mA 120 130MHz 15nA 300mV 45V 500mW PNP TO-92-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)BC237
TO-92-55℃~+150℃ 1 NPN 150MHz 15nA 350mW 45V 5A 6V 800mV 90 NPN TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 7 | BAT43 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D4, D5, D6, D7, D11 |
| 6 | CONN_1 | footprints:1pin-4 | P101, P102, P103, P104, P105, P106 |
| 4 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R13, R14, R21 |
| 3 | 2.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R19, R20 |
| 2 | 100nF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C6, C7 |
| 2 | 22K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R17 |
| 2 | BC307 | footprints:TO-92_BC237_307 | Q2, Q3 |
| 1 | 0 | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C4 |
| 1 | 100µF | Capacitors_THT:CP_Axial_L18.0mm_D6.5mm_P25.00mm_Horizontal | C1 |
| 1 | 10nF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C5 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 1K | footprints:RV2X4 | RV1 |
| 1 | 1N4004 | Diode_THT:D_DO-35_SOD27_P12.70mm_Horizontal | D1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18 |
| 1 | 220nF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C9 |
| 1 | 220uF | Capacitors_THT:CP_Axial_L18.0mm_D6.5mm_P25.00mm_Horizontal | C2 |
| 1 | 22uF/25V | Capacitors_THT:C_Axial_L12.0mm_D6.5mm_P20.00mm_Horizontal | C3 |
| 1 | 22uH | footprints:INDUCTOR_V | L1 |
| 1 | 24Cxx | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | 5,1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 6.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
| 1 | 62K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | 74HC125 | Package_DIP:DIP-14_W7.62mm_LongPads | U2 |
| 1 | 7805 | footprints:TO-220_LM78xx | U3 |
| 1 | BC237 | footprints:TO-92_BC237_307 | Q1 |
| 1 | CONN_2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | P1 |
| 1 | DB9-FEMAL | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J1 |
| 1 | GREEN-LED | footprints:LED_D5.0mm | D9 |
| 1 | JUMPER | connect:GS2 | JP1 |
| 1 | LT1373 | Package_DIP:DIP-8_W7.62mm_LongPads | U4 |
| 1 | PIC_18_PINS | Package_DIP:DIP-18_W7.62mm_Socket_LongPads | U5 |
| 1 | PIC_8_PINS | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U6 |
| 1 | RED-LED | footprints:LED_D5.0mm | D8 |
| 1 | SCHOTTKY | Diode_THT:D_DO-35_SOD27_P12.70mm_Horizontal | D10 |
| 1 | SUPP28 | Package_DIP:DIP-28_W7.62mm_Socket_LongPads | P2 |
| 1 | SUPP40 | footprints:40tex-Ell600 | P3 |
| 1 | YELLOW-LED | footprints:LED_D5.0mm | D12 |
Questions
How big is the Pic programmer PCB?
It measures 160 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pic programmer use?
63 parts, built around the 74HC125D, BAT43, BC307 and BC237. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pic programmer KiCad files?
From the rustyoz/kicad repository on GitHub, at the commit this page was made from: the board is demos/pic_programmer/pic_programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pic programmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask rustyoz before reusing the design.
More from rustyoz/kicad
2- 2 layers48.3 × 41.9 mm
Similar boards
- 2 layers160 × 99.1 mm
Flat hierarchy
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
64 parts744MIT - 2 layers160 × 99.1 mm
- 2 layers160 × 99.1 mm
- 4 layers308 × 225.4 mm
- 2 layers160 × 112.4 mm
- 2 layers299.7 × 320 mm
- 2 layers85 × 100 mm
- 2 layers130 × 60 mm
